The main purpose of this project was to make a survey of the steam and electricity consumption at Akzo Nobel Functional Chemistry AB and give suggestions of how to minimize them. These three different areas were focused on. First to make a survey of all the most important consumers, second to find the electricity consumption of the air compressors and the amount of waste heat produced from them. The third area was to calculate a model of how much fresh water that is used during a cooling sequence in the water based heating/cooling system of the reactors and give a suggestion of a suitable reuse for this water.The main result is a total survey of the energy consumption in steam and electricity. The survey shows that the second largest group after drying is heating of ventilation which gives big potentials of reducing the total steam consumption if there is a way of being self supporting in ventilation heat.

Small hydropower plants have been an important source for electricity for many years. During the 70?s the general thought was that nuclear was the future. Around 2000 small waterpower plants were shut down. It wasn?t profitable to invest in.

The debate on the future of Nuclear power in Sweden has increased with the discussion on global warming. The uncertainty of fossil fuel- and carbonprices the latest years has aroused considerable interest in Nuclear from power companies, industry and politicians. Nuclear power plants have negligible CO2 emissions and are not directly affected by increased price of emission rights and fossil fuels. The future power production needs to reduce its emissions of greenhouse gases to become sustainable. The purpose of this study is to examine the value for power producers to have the option to invest in Nuclear power and how a Nuclear power venture would affect future electricity prices. The study uses two methods, a traditional cash flow model and real option analysis, to estimate the value of Nuclear power.

When the costs for a company increase it is normal to look for alternatives to lower thesecosts. One of the expenditure that farmers have is energy costs. The price for the energy mayvary because of the free market. To look at the possibilities for a farmer to invest in sunpower, to make the company less sensitive for the changes on the electrical market, isinteresting. The biggest part of the electricity that is produced in Sweden comes from a fewcompanies on the market.

Feedback tools support electricity users within the Swedish residential sector to increase their knowledge of electricity and the electricity market as well as to become more aware of their electricity consumption, which in turn encourages a reduction and an increased flexibility of electricity use. The primary aim of this study is to identify and analyse how existing feedback tools can be improved, to ensure that they contribute efficiently to the achievement of the EU objectives congruent with a more sustainable energy system in 2030, emphasizing: greenhouse gas reduction, increased energy efficiency and an increased share of renewable energy. In order to reach the primary aim of this study, existing feedback tools have been identified and mapped and interviews with feedback tools providers have been conducted. The study is limited to three research areas: the practical functions of feedback tools, available technology and the use of feedback tools.The use of more efficient feedback tools will provide an increased success rate for energy management, which includes both behavioural changes and energy efficiency. According to the results from the interviews conducted for this study, an increased use and user frequency is important to utilise the energy management potential.

There have been several projects with solar installations in Sweden, and Sala-Heby Energi (SHE) wanted to create a solar plant. The question answered in this thesis is whether it is economically viable to create such a source of sustainable, renewable energy. The plant would be built with the help of the financial effort from 120 customers. This economic union would sell the electricity to the SHE, for SEK 4.50 per kWh up to a certain level over a period of 10 years. It would be a long term commitment to environmentally friendly electricity, using solar cells which convert sunlight directly into electricity.In year 2009 there was introduced a new state aid for photovoltaic systems, to create an increased and continuing interest in solar cells.

During the last years commercial Wind Power Turbines (WPT) has become larger regardingto the generator sizes and hub heights. Available hub heights around 100 meters is nowcommon, which has led to profitability for WPT located in forests where there normally are tolow wind speeds. The current knowledgement regarding turbulence and the variation in thewind profile for the outcome of the power production for the WPT in forests is limited.In this Master of Science thesis an investigation concerning forest located wind power plantshas been made. The purpose has been to investigate if plants located in forest perform lesscompared to wind power turbines located at more common locations.The analyses are based on statically material for determining the availability,production/generator size, production/hub height, production/swept area and how thetopography affect the production results.The analyses show that the variation in production result for WPT located in forest comparedto turbines located at other locations is small. The availability is high and the productionresults are good..

The objective of this work was to introduce measures to reduce energy and water demand at Gävle Söder 17:10. To succeed, this energy audit has been made. The work is based on collected statistics from the property owner Norrporten, measurements, literature review and through consultation with experts in the field. Two models, one for each building, have been created in the simulation program BV2 to estimate the potential of energy measures based on the collected information. The models in BV2 have been verified against the statistics of the energy consumption.With the help of calculations and simulations, seven cost-effective measures have been identified.

Because of the increasing trends in energy consumption and increased environmental awareness, greater focus has been placed on improvement and development of renewable energy sources. An already proven and accepted method is biogas production from anaerobic digestion at municipal wastewater treatment plants.In the waste water treatment process solid material and dissolved pollutants are separated from the water, forming a sludge. The sludge is separated from the process and stabilized during anaerobic digestion or aerobic aeration. Most often, mesophilic anaerobic digestion is used. Because of degradation by microorganisms, biogas with a high content of methane is formed during the digestion.

This essay is an enquiry about how companies as participated in a Lean pro¬duction education use this education. The essay describes also how one works with the implementation of Lean production and how they believe that they will work. The enquiry tries to create an advisory material for other companies that are in the beginning of implementing their own Lean production systems. There these companies? gets a picture of how other companies have done during their try to create a functioning Lean production system.

This survey deals with textile production and how it was carried out during the late Iron Age,with main focus on a central place, Uppåkra. A comparison has been carried out betweenUppåkra and two agrarian settlements, Fosie and V. Karaby, from the nearby landscape toinvestigate whether any variation in production can be detected. The value of textiles has alsobeen investigated to determine whether a potential specialization in production may have ledto a surplus.An analytical and comparative method has been used with focus on the context of thematerial.The results show that the textile production vary at the different sites, and that a need fordifferent types of textiles has existed. At Uppåkra, the possibility to produce fine threads andtextiles existed as demonstated by the findings of small and lightweighted spindle whorls.This suggests that the production may have included both fine and coarse textiles.

This study is done together with Sydved AB in the summer of 2012. The purpose of the study is to analyse how different quantity of assortments influence the production for forwarders and harvesters with multiple tree handling aggregate in thinning, by different tree volumes. To make this analyse a time study was performed where three entrepreneurs work has been analysed. Beside the analyse, of different quantity of assortments, has also been analysed how the tree volume and a forest fuel assortment effect the production. The result of this study shows that the quantities of assortments have a significant meaning for the production. The biggest differences are most distinct between one and three assortments in the smaller tree volumes where production goes down if the quantity of assortments increase.

Background: The situation for Swedish agricultural production today is characterized by an increased competition, particularly after the country joined the European Union. Swedish agricultural production laws guarantee safe, high quality foodstuffs. However, due to these strict laws, Swedish farmers face higher production costs than their competitors. Meanwhile, cheaper imported goods compete freely on the Swedish market. Swedish agricultural production must find new ways to survive in the increasing competition.

The main purpose of this master thesis is to identify guidelines for a sustainable production that can provide useful information concerning the establishment of a biodiesel production. These guidelines concern the surrounding production environment, such as infrastructures and industries.The thesis is based on theoretical grounds surrounding industrial symbiosis, biodiesel production and how sustainable development should be designed. A study of an already established producer in a similar business area has been used to provide a picture of similar projects. The thesis has with the supervisor's consent focused on the production conditions that are affected by location.The production conditions selected are heating, raw material market, residual and sustainable profile. These are then evaluated through an Excel-based sensitivity analysis.

In our everyday life we are faced with many choices that have consequences on the environment. One of these is the food we choose to eat since food production has a big impact on the environment. In organic production the aim is to have a natural production process, where environmental impacts are minimized. By choosing organic food it is therefore possible to contribute to a better environment. A large number of meals are served every day in the public sector, which makes it an important player in the consumer sector that could make a major difference for the environment..