A decade ago the organic egg production in Sweden was nearly nonexistent (Föreningen för ekologisk fjäderfäproduktion, 2008). A rising demand for these products in the beginning of year 2000 made the organic egg production the most increasing production of all organic provisions. The Swedish consumers value provision production that have a reduced impact on the environment and further protects the wellness of animals and plants (Jordbruksverket, 2010). Today, the organic egg production composes roughly 6 % of the total egg production in Sweden. This indicates that the ambition of Jordbruksverket, which has an organic egg production goal of 10 % of the total production, is not yet achieved.The consumer demand on the market is the driving force for these new products, and the higher prices contribute to an essential portion of the additional costs of organic egg production (Jordbruksverket, 2004).

Lean is a production philosophy which is about increased resource use while meeting customer requirements. The foundation of lean comes from Toyota and their production philosophy The Toyota Way. Professor Jeffrey k. Liker has worked with Toyota's production philosophy and Lean for a long time and has created a 4 P model and 14 principles that characterize the Toyota production system (TPS), which many sources refer to.The aim of my work is to study the working procedure of asphalt projects from sales to the laid asphalt with a focus on planning and production management. The goal is to examine how the lean philosophy can be applied in planning and production to simplify the flow of asphalt projects based on Likers model and principles.

The housing sector of today represents for almost 40% of the energy consumption, an energy consumption of which the major part consists of non-renewable energy sources. This is not sustainable and utilization of new energy-efficient technologies in buildings can be a step in the right direction, towards a sustainable energy society.This report has been made on behalf of and in cooperation with Älvstranden Utveckling AB in Gothenburg to examine how future energy-efficient technologies can affect the energy demand in energy-efficient multi-dwelling buildings.The report is based on Älvstrandens passive house, Hamnhuset, a house whose energy consumption is far below the BBR's requirements. The report looks at the opportunities for improvement within windows, insulation, solar energy technologies, as well as white goods. Computer simulations are then made to apply the selected technologies into a reference building. Technologies are selected from an energy efficient perspective and no account has been taken of other aspects such as the economy.

The objective of this study was to make an inventory and a potential analysis of the organic beef production in the region of Gävleborg, Sweden. A survey was conducted, where a questionaire was sent to all farmers in the region who had environmental subsidies concerning organic cropping systems in 2001. In total, there were 701 farmers, of which 46 % participated in the study. Three slaughter houses were interviewed to get their pictures of the development of organic beef production. The study shows that there are potentials and interests in the region to increase the production of organic beef.

Like many small-time companies there is a need to improve the flow of materials at HSP-Gripen AB. The company develops and manufactures hydraulic-powered grapples for the machine- and forest industry. By mapping the material flow in the current production and gathering necessary data, suggestions on how different parts of the production could be controlled is presented in this dissertation. This has been achieved by the study of relevant scientific literature. The suggested ways of controlling the production consist of 2-bin systems, hybrid material flow system as well as a cyclic product-planning.

With a shifting world market and periodically profitability issues, Swedish farmers seekalternative ways to enhance their profitability. One interesting alternative to get a highervalue and enhance products is biodiesel, a way to improve the profitability on a farmscale.The diesel that is produced and sold, already have a mixture of 5% biodiesel, andthere is a possibility to add more biodiesel to it. By developing new engines severalengine-manufacturers now allow a mixture up to 100% biodiesel in their engines. Hencethere is a market for an increased production of biodiesel. The aim of this study were toinvestigate the possibilities and the problems related to farm-scale production ofbiodiesel, and to study the profit margin in the production.

The main purposes of this study were to 1) quantify bacterial production in winter during ice conditions, and 2) to compare these production measures with values measured from summer and open water conditions in three humic lakes situated in northern Sweden. Another purpose of this study was to 3) examine whether clear-cutting significantly affected bacterial production or water chemistry in two lakes situated in catchments were a large part of the forest had been removed through logging compared to an undisturbed reference lake. In winter (March/April 2014), the bacterial production ranged from 0, 7 - 2, 2 µgC/L/day and in the summer of 2013 the production values was 4 ? 10 times higher. The main reason for lower bacterial production in winter was ascribed to lower water temperatures as well as to older and more recalcitrant DOC, as there were no significant differences in total dissolved nitrogen or DOC concentration or -quality, that could explain a lower production compared to summer.

The development of solar photovoltaic (PV) is increasing,with declining module prices and with a strongenvironmental profile. Policies are developed around theworld to achieve the targets set for renewable energy.In Helsingborg, the local power company Öresundskraft isworking with solar PV to achieve the goals of the city.With their vision: - Energy for a Better World and Powerfor the Region, their work with developing the local solarPV market is continuing and the next step is to create asolar PV policy. Today their offer is 1 SEK/kWh for theexcess electricity delivered to the grid.It turns out that compensating the customer is a vitalpolicy and it has to be dynamic to follow the decisions ofpolitics. The same survey shows indeed, thatenvironmental and technical part is of interest. Solar PVwill be supported locally to act on environmentalsustainability and locally produced electricity and withthis Öresundskrafts vision will be achieved..

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

The Rya power plant in Borås produces district heating, district cooling and electricity. The plant is owned by Borås Energi och Miljö AB and is run by Dalkia Facility Management AB.In order to get the best heat exchange from the district hot water a pair of twin pumps and a turbine circuit pump are used as return pumps. Turbine circuit pumps are used to increase the pressure through the heat exchangers at the power plant. The pumps are in use when the flow is over 2 000 m3 h-1 and during the summer when re-cooling is used to improve the effectivens of the heat boilers.Since the pumps, that are parallel connected, rotating at a fixed rate per minute, the pressure is regulated with regulating valves. This report shows that during the 4,300 hours that the pumps where in use, energy corresponding to 590 MWh was wasted.

In our everyday life we are faced with many choices that have consequences on the environment. One of these is the food we choose to eat since food production has a big impact on the environment. In organic production the aim is to have a natural production process, where environmental impacts are minimized. By choosing organic food it is therefore possible to contribute to a better environment. A large number of meals are served every day in the public sector, which makes it an important player in the consumer sector that could make a major difference for the environment..

In today?s modern age, energy consumption has become a major issue, both from an environmental viewpoint and cost perspective. Because of a rapid technologic change and increased costs of production of electricity, the demand to develop effective methods for energy efficiency industries have grown.The electricity-intensive industries, such as plastic industry, the demand to reduce energy consumption has grown significantly over the past 10 years, which have led to the development of different methods to determine and locate energy-consuming parts in the industry. This also means being able to prioritize and organize activities in the industry.In this study the measurements of voltage, current, power and PF performance on injection molding machines (K-TEC 275 form Ferromatik Milacron in Germany) with a focus to locate, within a machine, various measures that could improve energy use in the plastics industry, in this case RostiGP in Gislaved. These measurements have been carried out with the help of a power quality clamp meter to carry out time logs of the machines for some time during normal word rate.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

Calculations are an important part of planning around a construction project. From concept to completion of the project calculation is a tool to try to predict the actual cost. During the production stage in particular, deviations occur which makes the actual cost different from the calculations.This thesis is done in collaboration with JM Residential Stockholm. The study includes a cost follow-up in which a comparison was made between the calculated production cost and actual cost for the five projects. The aim of the study was to observe the most common reasons that a project deviates from the calculated production cost and then summing these causes in a number of categories.