This study is intended to give an impartial view of a young and complex program in Sweden titled Product Innovation Engineering program. The purpose of this program is to increase innovation capability in Sweden that will result in new companies, patents and economic growth. The results from this study might give some direction to future innovation initiatives, but should primarily serve as a tool for the PIEp participants. The study will focus on investigating the creation of the program as well as the development of its strategy. From weaknesses and strengths within the strategy of the program the study should also attempt to show its future potential.

With the huge amount of computers connected to the Internet the IP-addresses are starting to run out. The Internet Engineering Task Force, IETF, have decided that it is about time to exchange the old 32 bits Internet protocol, Ipv4, to a more modern 128 bits protocol called Ipv6. This thesis explores the possibility to install Ipv6 in different operating systems. By testing various operating systems and by set up criteria compare them to each other we give the reader a picture of how the installation is done. We also show which operating systems to prefer if you want to use IPv6.

Denna rapport, En jämförande studie av Svenskt Vattens och CAC:s syn på HACCP-processen, En utvärdering och ett praktiskt tillämpande av Svenskt Vattens Handbok för egenkontrollprogram med HACCP, skriven av Anna Järvegren Meijer (handledd av Kenneth M. Persson, professor vid Teknisk Vattenresurslära, Lunds Tekniska Högskola och Anne Levin, konsult på SWECO VIAK, Malmö) behandlar kvalitetssystemet Hazard Analysis and Critical Control Points (HACCP) och fokus ligger på tillämpning inom beredning och distribution av dricksvatten.Rapporten består av tre delar. I den första redovisas HACCP-processen och de arbetssteg som Codex Alimentarius Commission har tagit som praxis. Här jämförs också Svenskt Vattens syn på HACCP i Handbok för egenkontrollprogram med HACCP med just CAC:s. Det konstateras att skillnader finns då Svenskt Vatten har valt att inte följa CAC:s praxis till punkt och pricka utan utformat arbetsgången annorlunda.Den andra delen av rapporten handlar om hur användarvänlig Svenskt Vattens handbok är i praktiken.

This degree project is made for Sundbyholms Golf&Country Club in Eskilstuna. The aim of the report is to produce a website which include a golf course interactive guide and an online game. Programs that have been used during the project are Adobe Photoshop, Macromedia Dreamweaver, Macromedia Director, Discreet 3DS Max and the plug-in 3DS Max Exporter. The choice of programs are based on experience and knowledge from the university education Media and Communication Engineering at Linköping University. The golf course guide contains a 2D-guide (image) and a 3D-guide (interactive image).

The construction process which is used today while constructing residential buildings has for along time remained unchanged. Unfortunately the development process has gone away frombecoming industrialized and instead most of the work is done at the construction site. In thisrespect this is a worse alternative because the project outcome will be more expensive and theconstruction time will be longer. Skanska?s vision is to have a process which is more like the oneused in small residential buildings which is fully industrialized.The constructing process for residential building involves more parties and therefore it becomesmore complicated.

This thesis has been performed for the company System Andersson as a part of the bachelors degree in information technology at the School of Engineering in Jönköping. The thesis is based on the development of an iPhone application.System Andersson has an application for Android that is being used for their MPS system (material and production control system). Their customers, however, have also showed interest in being able to use this application for iPhone.The students handle the subject of iOS developing, including the design of the application, the use of the development language Objective-C, the use of the scripting language of Json used for server connections and SQL.The primary goal with this thesis has been to improve the students knowledge in such subjects as application development for mobile platforms, in such areas as Xcode, which is the development platform that Apple uses and Objective-C, which is the development language being used. The result of this thesis is an almost fully functional iOS application, similar to the Android application with some functionality missing..

MindMe is an aid for people with cognitive memory impairments. The aid is completely new and has beendeveloped within this bachelor thesis, no product of this nature could be found on the market before. Theidea came from Niclas Jarhäll, CEO of Mutual Benefits. Mutual Benefits were also partners in the project.The project was carried out by us in cooperation with Bachelor of Science in Innovation Engineeringstudents Malin Albertsson and Victoria Hedman at Halmstad university. The aid consists of a mobile phoneand a number of tags.

Det är idag fortfarande en stor del av alla IT-projekt som misslyckas och kravhanteringen har fått en större betydelse för om ett IT-projekt ska lyckas eller inte. För att en större möjlighet till att ett IT-projekt ska lyckas används kravinsamlingsmetoder, dock är det viktigt att rätt kravinsamlingsmetod väljs till det specifika projektet. Om fel kravinsamlingsmetod väljs från början kan detta ledda till en misslyckad systemimplementation. Därför har författaren av rapporten valt följande huvudproblemfråga att undersöka i denna uppsats: Vilka råd rörande metodval kan ges till organisationer som ska implementera och välja en kravinsamlingsmetod? Med hjälp av enkäter och djupare intervjuer har författaren samlat in tillräckligt med material för att spegla de svar som framkommit i slutet av rapporten.

Hur varierar proteinsammansättningen i ölet genomölbryggninsprocessen och hur stor skillnad är det mellan kornmalterna. Syftet med mitt examensarbete var att se hur proteinsammansättningenförändrades under olika steg av en ölbryggningsprocess.Proteinsammansättningen delades in i 3 grupper: 1) albuminer ochglobuliner, 2) hordeiner och 3) gluteliner. Dessa protein jämfördesmellan 2 sorters malt för att se om någon skillnad kunde ses.Ölen bryggdes efter ett standardrecept för pilsneröl. Under ölbryggningsprocessen togs prover ut vid bestämda steg och tidpunkter.Proteinsammansättningen bestämdes genom analysmetoden SDS-PAGE.Resultat: visade att ingen synbar skillnad på proteinsammansättningen mellan malterna kunde ses.Proteinsammansättning i de olika stegen var däremot tydlig, albumineroch globuliner är de enda protein som finns kvar i det färdiga ölet, varavde flesta är z-protein. ..

Den här rapporten är ett resultat av ett kandidatarbete på 20-poäng. Projektet som rapporten handlar om, beskriver hur utvecklingen av ett webbutikssystem åt ett flertal företag gått till. De har i sin tur köpt webbsystemet från företaget Opti Use som givit oss uppgiften. I rapporten diskuteras hur utvecklingsprocessen gått till och hur ett arbete med ett befintligt system upplevts. Rapporten beskriver även hur lösningen på uppgiften har tagit form och hur utvecklingsprocessen påverkat den.

This report is the documentation of a project in the education Master of Science in Mechanical Engineering. The project was carried out at Alfakonsult AB. The purpose of the project was to map out the transference of information between the different operators in the supply chain of medicine in Sweden and to analyse this in order to reduce lead-time and the total throughputtime. The supply chain of medicine in Sweden consists of producers, distributors, one wholesaler, prescribers and patients. The mapping of the transference of information showed that most operators in the supply chain have done well introducing technical aids to facilitate the transference of information.

För ett flygbolag är det viktigt att ha en effektiv planering av sina resurser. Att kunna utnyttja personal och flygplan på rätt sätt är en förutsättning för en fortsatt överlevnad på marknaden. Flygbolagens tjänstebestämmelser regleras idag enligt nuvarande BCL-D 1.15. Under våren 2004 har Luftfartsverket behandlat en remiss som utgör ett förslag på en eventuell förändring av dessa tjänstebestämmelser. Remissen är ett förslag som skall gälla det gemensamma regelverket EU-OPS.

The work has been carried out in cooperation with the company Zenit Design in Malmö. The project's goal was to restore, improve and produce an ozone generator. During the project, the authors sought relevant literature in databases, been in contact with US suppliers of fuel cell membranes, Asian suppliers for the processing of Teflon and Titanium parts in mechanical engineering and Swedish suppliers of various standard components. The authors had access to a temporary lab at Zenit and electron microscope at Halmstad University where material tests were performed. The authors have also had access to measurement equipment to measure amounts of ozone.During the work, the authors have mapped how an existing ozone generator works and then have their own development.

In Sweden, there are limits to how much leachable substances waste must contain in order to be deposited as hazardous waste. Fly ash from waste incineration often end up over the limit, mainly due to the chloride content. Fly ash is therefore often deposited abroad. The purpose of this study was to investigate the possibility to handle fly ash locally. To clarify how the law is applied, environmental reports and permit documents from ten waste sites with permission to deposit fly ash were studied.

The interest in tiny wireless applications raises the demand for an integrated reference oscillator with the same performance as the macroscopic quartz crystal reference oscillators. The main challenge of the thesis is to prove that it is possible to build a MEMS based oscillator that approaches the accuracy level of existing quartz crystal oscillators. The MEMS resonator samples which Philips provides are measured and an equivalent electrical model is designed for them. This model is used in the simulations of the Pierce oscillator and the transresistance amplifier oscillator that are evaluated in this thesis. Finally the Pierce oscillator is implemented in the A BCD2 process and manufactured at Philips Semiconductors in Nijmegen, The Netherlands.