The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

This report deals with an exam report written by Olle Hjalmarsson and Thomas Likar, students at Högskolan i Halmstad. The project was carried out for Haldex Traction AB in Landskrona whose business consist of manufacturing automatic all wheel drive systems (AWD-system). These systems consist of a plate clutch which activates all four wheels of a 4-wheel driven vehicle. An important component in these clutches is the accumulator which basically consists of a piston under the load of a spring which creates an oil pressure with the help of an electric motor used for actuating the clutch.At Haldex difficulties has been experienced regarding the assembly of the accumulator parts due to the small tolerances between the piston and the hole of the accumulator in the cast aluminium housing. Attempts have been made to assemble the parts in existing robot cells.

The study was a quantitative cross-sectional study which aimed at investigating college students? eating habits in relation to the Swedish food agency dietary recommendations. The likely factors associated with eating habits and attitudes towards dietary recommendations were also investigated. Non probability sampling method was used giving rise to convinient study sample of 51 individuals (41 women and 11 men) ages 19 to 37. The participants were part of four different types of educations, Care and health, Economy, Engineering, computering and societal planning and Culture and media.

Denna uppsats avser att belysa frågan varför prototyper är ett viktigt verktyg i en utvecklingsprocess av ett mobilt system. Fördelar och nackdelar som verktyget kan innebära behandlas och olika tillvägagångssätt beskrivs. Arbetet med detta baseras i ett praktiskt utvecklingsprojekt på IT-kunsultföretaget Citerus. Projektuppgiften var där att genom en informationflödesanalys definiera olika flaskhalsar i informationsflödet på olika hotell för att sedan föreslå ett effektiviserande system. Projektet koncentrerades vidare på städpersonalen och deras arbete. Utifrån fortsatta studier föreslogs ett mobilt system som ger städpersonalen information för att lättare och effektivare göra sitt jobb. I flera olika forskningsdiscipliner som berör design och systemutveckling förespråkas ett utvecklingssätt med hjälp av prototyper.

Problem: Idag har de flesta detaljhandelsföretag någon form av kundklubb för att stärka banden mellan sig och sina kunder. Men skapar kundklubbar lojala kunder per automatik, eller krävs det mer än vad de flesta företag erbjuder idag? IKEA Family är en av de kundklubbar som funnits längst och på varuhuset i Älmhult upplever man inte att potentialen med kundklubben utnyttjas fullt ut då relationerna med medlemmarna inte utvecklas i önskvärd utsträckning. I detta arbete undersöks huruvida detta beror på konceptuella brister, val av strategi eller implementeringen av konceptet på varuhusnivå eller om det finns andra förklaringar. Syfte: Syftet med uppsatsen är att utifrån vår fallstudie på IKEA-varuhuset i Älmhult, samt med hjälp av utvalda teorier kring lojalitet, relationsmarknadsföring och strategi, skapa förståelse för hur en kundklubbsstrategi bör utformas och förverkligas samt visa på vilka problem som kan uppstå.

The goal of this project was to make the requirement process at the Swedish Coastguard more effective. The first step to achieve this was done by locating bottle necks in the process with value stream mapping method. The result of this study showed that the biggest restriction in the requirement process was while examining older requirement documents to understand what elements were suitable for the particular project. This was followed by a study of literature, interviews and theory of Lean Production with the ambition to investigate how the requirement process was handled on other companies and how to improve the process on the Swedish coast guard. This led to a number of potential enhancements of the process which later was evaluated. Requirements written by different people in different organizations were analyzed in order to sort out if there were some similarities? which could be used as standard elements in a future standardization of the process.

Unmanned aerial vehicles (UAV?s) are nowadays greatly appreciated. The advantage over manned airplanes are great since UAV?s can be much smaller and therefore lighter. The goal of this project is to evaluate the performance of an environmentally friendly UAV using only lithium-ion batteries.

Stratego is a boardgame not very different from chess, that contains hidden information. Because of this, existing programs play at beginner level. The purpose of this thesis is to adjust a minimax algorithm so that it passes the demands of Stratego, and then build a Stratego agent around it. Tests with existing minimax algorithms leads to the development p-e-minimax. This algorithm uses two different values in its nodes to simulate the different information available to the agent and its opponent.

Vattenfall AB is a large producer of electric energy where approximately half of the energy comes from hydropower. Vattenfall Hydropower has got almost a 100-year old history and the company has developed a lot since 1909. After that the number of power plants increased and the competition got more intense, there were higher demands on the reliability. One way to secure the reliability with a good satisfaction at the power plants is to implement a maintenance method named Reliability-Centred Maintenance. RCM is a result of the introduction of the complex aeroplane Boeing 747 in the 1960?s.

This paper is about the new programming language from Microsoft, C# (See Sharp) and the .NET Framework. They are still in beta-version, but will be released on the market in February 2002. This paper presents C#, not in detail but the characteristics that distinguish the language. A comparison is done with C++ and Java, since C# is most resembling to these languages. Both C# and Java have been developed from the mother- language C++.

This thesis has been carried out onbehalf of Lindborg & Sons in Örsundsbroand is a concluding part of the Bachelorof Science program in ConstructionEngineering at Uppsala University. Theaim of the project is to make a plea fora database of good examples of themachine room types using Revit drawingprogram, and work out a correspondingworksheet .At the start of the process it becameapparent that there were somedifficulties in using Revit to creatingmachine room types of the variety whichthe company builds. For modelling ofoblique, curved and irregular lines, Ihad to use my AutoCAD Architecture andthen import them into Revit.The creation of calculus in Excel wastime consuming. On the other hand, it isa one-time work to create the template.The advantage of Excel is that there isno need for a re-calculation at the costof various types of machine hall. Allthat is needed is to replace the variousparameters.

Metso Paper offers a front-running range of solutions and services for the pulp and paper industry. At the baling unit, design solutions are developed for manufacturing and handling of pulp bales. The machines are continuously developed to satisfy customer needs. One big step in the development of the baling line was to remove hydraulics from the machines and replace it with electrical motors and pneumatics. This was not done on the folding machine which is still driven by mainly hydraulics.

Uppsatsen undersöker inledningsvis om FOI:s principer för kravformulering kan anses behöva kompletteras mot bakgrund av Försvarsmaktens behov och undersöker därefter kvalitén i några av flygvapnets kravunderlag relativt principerna för kravformulering. Av resultatet framgår att principerna kan behöva kompletteras med principerna prioritering och kontextuell beskrivning. Av fallstudiernas resultat framgår att kvalitén i flygvapnets kravunderlag relativt principerna för kravformulering generellt är låg, att den varierar mellan underlagen och att den i vissa fall är mycket låg i fråga om uppfyllnad av principerna. Uppsatsen rekommenderar att FOI:s principer för kravformulering utökas med principerna prioritering och kontextuell beskrivning. Vidare rekommenderas flygvapnet att öka kvalitén i framtida kravformuleringarna så att den militära nyttan av arbete med kravformulering även kan öka.

Stump biomass is energy rich and stump harvesting for use as fuel become more and more interesting in Sweden. Swedish Forest Agency (2009) has estimated that stump harvesting in Sweden would respond to an annual energy supply of 57 TWh/year. However, stump has not been recognized as a bioenergy resource in Sweden. Suitable methods for pre-treatment of stump are probably of great importance to make it accepted as fuel. It is therefore rewarding to carry out an investigation in this area for stump. This report represents results from a diploma project, which was aimed to develop a fixed bed reactor for experimental study of biomass torrefaction, followed by TG analysis and kinetic modelling employing Ozawa method and different kinetic models including one-step and three-pseudo-component models.

Föreliggande uppsats har som syfte att ta reda på vilken syn elgitarrlärare på estetiska gymnasieprogram har kring förmedling av sound och utrustning och vilka metoder de tillämpar för att lyfta fram dessa moment i sin undervisning. Sound kan definieras på många sätt, men i detta arbete har det en innebörd av vilka klanger som olika instrument, förstärkare och diverse hjälpmedel kan producera. Målet är att ge nuvarande och blivande instrumentpedagoger en inblick i hur elgitarrlärare arbetar med dessa moment i undervisningen idag. Förhoppningen är även att studien ska kunna ge inspiration till att utveckla metoder och finna redskap som hjälper elever att skapa ett eget sound. Datamaterialet består av intervjuer med fem elgitarrlärare samt observationer av tre av dessa lärares gitarrlektioner.