The purpose with this work is to investigate the cost to produce piglet in a case study company. The starting point is going to be the agriwise (www.agriwise.org) calculation which I am going to change and adapt to the case study company. To day the pig market is bad but we have probably reached the bottom. The market has started to rise. It is no business to produce piglets today.

The costs of logging and of transportation with truck are dominating the total cost of wood delivered at industry. To support the profitability for the members' forestry the processing and handling with the timber has to be as efficient as possible. Increased length of pulpwood in thinning is one conduct that can result in higher productivity and/or lower costs. The study is scaled as a system analysis with the aim to exemplify the differences between working with 3- and 4-meter as standard length of pulpwood, related to biological aspects, timber receipts, cost of logging and cost of transportation with truck. Important aspects are if the change is technically and biologically feasible and economically profitable.

The use of fossil fuels such as coal and gas are a contributor to the global warming. The climate change is a worldwide problem with far reaching consequences that is believed to be very expensive. The United Nations has been introducing a framework convention on climate change. One component of the convention is the Kyoto protocol. The protocol is obligating the developed countries to decrease their emissions of greenhouse gases by 5.2 percent during the time period 2008-2012.

Syfte:- Att undersöka om OECD:s riktlinjer är vedertagna hos de granskade koncernerna och beskriva vilka internprissättningsmodeller de använder sig av.- Att beskriva vilka effekter de undersökta koncernerna försöker uppnå med sin internprissättning.- Att undersöka vilken vikt skatteaspekten har för dessa koncerner vid sin internprissättning.- Att undersöka hur dessa koncerner dokumenterar sin interprissättning och vilka påföljder de nya dokumentationskraven kommer att få för dem..

This thesis is written on behalf of Skanska, Väg- och Anläggning Stockholm Mälardalen, vid Nya Karolinska Sjukhuset i Solna, NKS. The report has resulted in recommendations for the method of soil stabilizations of soil nailing, excavation of slope and fiber reinforced shotcrete, which is the most suitable method from a safety and a cost point at the NKS.The aim of this thesis was to investigate whether fiber reinforced shotcrete increases slope stability, with the focus being on the total stability. The main goal was to investigate which method of soil stabilization is the most suitable for the slopes that are analyzed in this report. Through studying literature, the authors have gained an understanding about the theoretical background for the given problem. Through calculations and analyses of the slopes, safety factors have been acquired.

The purpose of this essay is to investigate if the companies listed on Nasdaq/OMX Stockholm Large Cap use the earnings management phenomenon Big Bath Accounting to a greater extent when a change of management (CEO) is made.Management tends to use earnings management when there is a bonus plan linked to the result of the company. To gain maximum bonus the management will try to manipulate the result in a way that in a long term maximize their utility. Through the earnings management technique Big Bath the management is given the possibility to take one large cost as a one-time expend, even though the cost is supposed to run over several financial years. This, of course, within the legal framework. A big bath may occur when there is an impairment of goodwill, tangible and/or intangible assets or larger provisions for future expense, or both of them at the same time..

AbstractToday, too many construction projects are delayed and deviates from the budget. Agood project management is the basis for successful construction project. The mostcommon planning methods in the construction industry is currently Gantt chart andCPM. The problem with these is that focus is only at the time of the project anddoesn?t handle the budget.

The waste of material is a big expense for manufacture companies caused by lack of quality. The cost by lack of quality often totaled to a big percentage share of the turnover when all cost related to lack of quality is included. New manufacturing systems like Lean production or Just In Time demands better internal quality for the manufacturer. To make those manufacturing system with small and none buffer stock successful the quality improvement continuously have to be developed.Measuring of waste of material in Bubs Candy?s factory where not simple due to the products does not have a permanent weight during the manufacturing process.

The purpose of this project is to study Partab's material distribution process, furthermore identify critical problem areas within the company. Further the aim is to provide suggestions to new work procedures regarding material distribution and related processes. Appropriate literature has been used as a support in this process. The main goal of a commercial company is to generate cash flow, and maximize the return on investment. Streamlining material supply and the use of material is a part of this process. Virum and Persson define logistics as: "Logistics is the approach and principles founding the process of planning, development, coordination, organisation, management, and control of material distribution from supplier to user".

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

The climate changes that are occuring in the world have resulted in that the EU callingfor a 20 % reduction in energy consumption to the year 2020, to reach that goal theEU want the public sector to go forth as a good example. Västfastigheter owns andmanage the hospital buildings in the Västra Götaland region. To be able to reducetheir energy usage Västfastigheter has hired several consulting firms to chart out theenergy consumption on each hospital building. The biggest energy savings potentialhave been calculated and what the cost will be to perform each action. The energyaudit have been completed and stand as the decision basis for Västfastigheter?s choiceon which action packages that should be implemented.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

The automotive industry is a highly competitive market characterised by low profit margins or huge losses. Cost reductions have been of top priority for all OEM?s (Original Equipment Manufacturer) and will continue to be so for many years to come. Beside cost reductions, reducing the time-to-market is of greatest importance to stay in the competition. OEM?s that are slow to market with products that neither matches customer expectations nor the products of their competitors, will soon loose market shares and see their economical performance falter.