Sweden had in the early 1930's the lowest birth rate in the world. Population Commission which was established in 1935 concluded that one of the biggest social problems was the working women?s heavy workload. To deal with the low birth rate reforms and programs were founded both in order to help the women but also in order to support the inadequate motherhood. Government grants were set up to start the so-called vacation home for housewives where the government?s visions of the vacation homes were active rest and recreation.     Based on the Leisure Inquiry report regarding vacation homes for housewives - the purpose of this paper is to examine how the government visions regarding vacation homes for housewives were practiced and how the future of prevailing gender contract affected the holiday home.

Allt fler människor använder sig av sociala medier via sina mobiltelefoner. Mobiltelefonernas egenskaper tillåter användarna att kommunicera på ett snabbt och platsoberoende sätt. Flera stora välgörenhetsorganisationer i Sverige har börjat mobilanpassa sina hemsidor. Däremot används inte sociala mediers mobilanpassade funktioner för att tillåta social interaktion. Denna uppsats undersöker hur välgörenhetsorganisationer kan tillåta användare av mobila sociala medier att dela med sig av sitt engagemang till sitt sociala nätverk, för att öka givandet via mobiltelefoner.

Ternary codes for unequal error protection is a part of a communication system where different parts of the information to be transmitted can receive different amount of error protection. There are a lot of applications where the channel conditions fluctuate so that reliable or acceptable communication can not be guaranteed. Regardless whether the fluctuations of the channel are intentional or not the idea is to let the coderate decrease so that the error correcting capability can increase for the part of the information to be more protected. By using the support, the nonzero positions of the ternary code, a new binary code can be extracted with properties different from the ternary code in the sense of cardinality and minimum Hamming distance. When the channel conditions are good the receiver decodes the message using ternary decisions and receives all information included in the codeword.

The purpose of this thesis is to do a critical review of the aid organization SOS Children?s Villages text- and video campaigns, from a postcolonial perspective. Our purpose is divided into two questions: Are there colonial values in the advertising campaigns? Which language- and image strategies are used by SOS Children?s Villages to put across their messages? Our material consists of 10 selected video clips, and four printed ads that are made up of an image and a short text, which are part of a campaign named: Inte ett enda barn ska behöva vara ensamt (translation: Not a single child should have to be alone). We have chosen to use text- and image analysis as a method in our review of the material.

In system development it is today increasingly common to use a model-based system development method. These methods that are suited for Agile work with simple and quick updates and implementations of new applications in systems conform to the requirements that are becoming more important today, namely more flexible and less expensive system that still maintain high quality and safety.A company that has been working with this type of system development method for a long time is Genicore AB, which also has developed their own tools and model language in order to better model the information management systems in complex and abstract operations. Genicore AB is trying to spread their method other developers and have therefore taken the initiative to start this study. The method is evaluated and tested by two students with relatively little experience in model-based systems engineering in order to gain a new perspective on how the method functions. The method has been applied to an educational activity in order to test it in a new domain, and this led us to our research question;?What criteria are of particular relevance in the implementation of a MBSD method on on complex businesses??Through literature reviews and interviews, we formed an idea of how model-based system development works from a theoretical perspective, and then continued to the case study conducted on the educational activities at the faculty of IT at University of Gothenburg.

MYDATA automation AB is one of the leading companies in development of surface-mountingtechnology and stencil free solder paste applications. MYDATA?s MY500 is a jet printerdesigned for solder paste application on printed circuit boards. The jet printer contains a cassettewhich consists of a holder and a cartridge. There is also a calibration unit which monitors andcalibrates the application of solder paste.

The primary function of a mixer is to keep a fluid in constant motion. All mixing applicationsrequire varying degrees of small-scale turbulence and bulk flow. The performance of asubmersible mixer is measured by the thrust that it produces, while the strength of the bulkflow is dependent on the total amount of installed thrust.In a mixer, the fluid quickly flows past the propeller, and as a result, the current is mainlyaxial. The fluid will also obtain a rotating velocity, or a swirl, though this is significantly lessthan that of the propeller. During the process, the total amount of energy increases in the formof static pressure and kinetic energy.

This thesis examines history of the subject of mechatronics and innovation. The main reason tostudy mechatronics from a historical point of view is that it has never been done to a greater extent before. An overview is justified because various definitions have been used over the decades, but nowadays the subject has become more established. Focus in this thesis is mainly on development of the subject of mechatronics at Royal Institute of Technology in Stockholm. Innovation is the other aspect of this thesis.

Powder Metal (PM) gears are machine element components which operate under the same principle as conventional gears, but, due to their intrinsic material characteristic need to be designed slightly different, and its manufacturing process offers advantages previously unobtainable by conventional steel gear manufacturing methods. The use of PM in similar applications, such as synchronous hubs, makes them a suitable candidate for production in such material. The current master thesis work focuses on gear design using PM by utilizing finite element method (FEM) to reduce weight and inertia taking into account root bending strength and tooth deflection.First a topological optimization is used to determine feasible candidates for different web designs which have as objective to reduce volume, similar topologies were shown during different loading conditions; and hence, this topology was chosen as a suitable candidate. A shape optimization of the topological candidate was performed having as state variables root bending strength, independent for compressive and tensile side of the tooth loading; and tooth deflection, which in concept can be correlated to static transmission error (TE).Another aspect in this thesis analysed is the possibility to incorporate non-trochoid root geometry, a trochoid root is always present when machining with a hob, into the gear root and hence reduce the stress concentration here. Due to the use of PM, a non-symmetric optimized root can be achieved and hence be optimizing compression and tension.Results showed significantly lower inertia, for example certain results showed 40% reduced when compared to solid gear, with adverse effects as increase in tooth deformation and increase in maximum principal stress.

Together with Attends in Aneby a thesis of 15 ECTS (credits) have been undertaken. The assignment was to develop a new incontinence product for single use. Users of the product value comfort, flexibility, softness, comfort and a discreet product. Users are for individuals with incontinence problems that usually receive the products via prescription. The product must also have an attractive price and good quality from the purchase / originator's perspective.Currently there are two models that Attends supplies, which the project intends to develop, (Slips / Briefs and Pull On's).

The aim of this Master´s thesis is to explore how public libraries in a successful way can work in projects with young people. It intends to point out different factors that in a legible way affect the accomplishment and outcome of the project. Another purpose of the study is to uncover the various approaches existing within the projects towards young people and to find out why it is seen as important to work with youngsters, considering the hard work that it requires and the reluctance of the young to visit the library. The examination is based upon eight different and fulfilled projects. Information about these has been received through project descriptions, project reports and documents describing applications for economical benefits.

Transmission of reactive power is well known to cause active power losses. Thus, newcomponents who can help minimizing these expensive reactive power flows are ofgreat interest to the power distribution companies. ABB Corporate Research hasdeveloped the first electronic power breaker. One possible application for thisbreaker is transient-free switching of capacitor banks. This could prove a usefuldistribution voltage complement to the switch-sync technique, mainly applied to transmissionvoltage level.

Network RTK is a real-time technique for accurate positioning with Global Navigation Satellite Systems (GNSS). The technology means the use of correction data from a network of GNSS receivers with known positions (reference stations) to reduce the uncertainty in position for the user´s GNSS receiver (rover). However, this requires that the correction data can be transferred seamlessly to the user in real time. Commonly the corrections are transferred via mobile phones. The Swedish National Land Survey operates a nationwide Network RTK service, where users can receive correction data via GSM or mobile Internet (GPRS).

This thesis was conducted at Linköping University and Saab Aerostructures DPS, Linköping, and focuses on the possibilities of flexible fixturing in machining applications. The thesis is part of the research project "Koofix", which is collaboration between Linköping University and a number of companies.The thesis is aimed towards small batch production which, for Saab Aerostructures DPS, means diverse part geometry and that parts are manufactured in very small numbers, sometimes just one piece. The result of this is that expensive dedicated fixtures are made for most parts. By introducing more flexible fixturing methods to this kind of production the cost of fixtures and tooling will be reduced, and make the production more efficient.New flexible fixturing methods has been presented and evaluated through the thesis, which has resulted in three different concepts. These concepts have been the result of literature screening and study of current manufacturing process at Saab Aerostructures DPS.

Three-dimensional computer graphics enjoys a wide range of applications of which games and movies are only few examples. By incorporating three-dimensional computer graphics in to a simulator the simulator is able to provide the operator with visual feedback during a simulation. Simulators come in many different flavors where flight and radar simulators are two types in which three-dimensional rendering of large terrains constitutes a central component.Ericsson Microwave Systems (EMW) in Skövde is searching for an algorithm that (a) can handle terrain data that is larger than physical memory and (b) has an adjustable error metric that can be used to reduce terrain detail level if an increase in load on other critical parts of the system is observed. The aim of this paper is to identify and evaluate existing algorithms for terrain rendering in order to find those that meet EMW: s requirements. The objectives are to (i) perform a literature survey over existing algorithms, (ii) implement these algorithms and (iii) develop a test environment in which these algorithms can be evaluated form a performance perspective.The literature survey revealed that the algorithm developed by Lindstrom and Pascucci (2001) is the only algorithm of those examined that succeeded to fulfill the requirements without modifications or extra software.