Three-dimensional computer graphics enjoys a wide range of applications of which games and movies are only few examples. By incorporating three-dimensional computer graphics in to a simulator the simulator is able to provide the operator with visual feedback during a simulation. Simulators come in many different flavors where flight and radar simulators are two types in which three-dimensional rendering of large terrains constitutes a central component.Ericsson Microwave Systems (EMW) in Skövde is searching for an algorithm that (a) can handle terrain data that is larger than physical memory and (b) has an adjustable error metric that can be used to reduce terrain detail level if an increase in load on other critical parts of the system is observed. The aim of this paper is to identify and evaluate existing algorithms for terrain rendering in order to find those that meet EMW: s requirements. The objectives are to (i) perform a literature survey over existing algorithms, (ii) implement these algorithms and (iii) develop a test environment in which these algorithms can be evaluated form a performance perspective.The literature survey revealed that the algorithm developed by Lindstrom and Pascucci (2001) is the only algorithm of those examined that succeeded to fulfill the requirements without modifications or extra software.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

I was assigned to the thesis as part of a project GMA AB (Ground Machinery Applications AB) is running. The project aims to develop a new method for injection of drilled holes in rock walls. Currently, the injections usually involve cement but the basic idea of the project is to replace cement with a supplement called Silica sol.Silica sol is known as a gelling liquid. The gel time is controlled by a mixing of saline. Depending on the amount saline that gets mixed in, the gel time varies.

This study is a part of a Swedish research and development project that is about heat-treated wood and is led by the Swedish University of Agricultural Sciences and Luleå University of Technology. Products that are heat-treated already exists on the market, foremost the Finnish brand ThermoWood®, bur the project group want to find out if it would be possible to start a Swedish production with somewhat different applications than what is common today. The heat-treated wood has many attributes that have changed in the heating process. It becomes more biologically durable, it gains stability in form and dimensions and it becomes darker and looses several unwanted extractives such as resin. Disadvantages that can be mentioned are that the wood becomes fragile and the strength properties changes. My main purpose with this study is to look into customer involvement in the early phase of product development. I also want to find out if the customers I interview think that the product is worth working with, which means start a Swedish production.

This paper is a study and comparison between the two Wireless LAN (WLAN) standards HiperLAN/2 and IEEE 802.11a. WLANs are used instead or together with ordinary LANs to increase mobility in for example an office. HiperLAN/2 is an European standard developed by ETSI and the IEEEs standard is American. A WLAN-card consists roughly of a Medium Access Control (MAC), Physichal layer (PHY) and an antenna. The antenna is the same for the different standards.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

The contribution of biofuels to the total consumption of energy in Sweden must increase to 49 % in order to meet the goals for the year 2020 set by the European Union. In order to do so, improved information systems are needed to support the business processes within delivery scheduling between customers and suppliers.Enterprise Architecture (EA) is a concept to enable the alignment of Business processes and Information Systems. EA is the framework for the architectures of business, information and applications. With a comprehensive view of the architectures, an Information System aligned with the Business processes can be enabled. The first step in the development of an Information System is documenting the business processes.The goal of this study is to clarify a generic sequence of activities performed within the delivery scheduling process and the information needed to perform the activities.Data for the study was collected through qualitative interviews, first through a meeting with the respondent and after that a following telephone interview with in total 5 suppliers and 6 customers of biofuels.

Det här arbetet syftar till att genom design av en telefonapplikation undersöka hur ljud kan förstärkas av den omgivande miljön. Arbetet visar på hur miljöförstärkt ljud skiljer sig från ljudförstärkt miljö samt vilka begränsningar det innebär att använda en vanlig smartphone som plattform. Ett långsiktigt mål är att genom en produkt som låter oetablerade ljudproducenter distribuera sina alster i den offentliga miljön främja fri kultur och kreativitet.Arbetet har följt principen för RtD (research through design), där designprocessen utgör det fall som studeras och dokumentationen av den utgör den bas av data som analyseras och leder till slutsatser kring ämnet.Designprocessen i detta arbete innebär en mindre omfattande användarstudie i enkätform för att identifiera målgrupp, krav och mål. Följd av en andra studie där en prototyp framtagen med grund i resultaten från användarstudien utvärderas av deltagare genom observation, intervju och reaktionskort. De största utmaningarna för designen grundar sig i att ta fram en applikation som inte stör upplevelsen, men samtidigt kan instruera användaren i hur man använder applikationen. Utifrån arbetet dras slutsatsen att användarinstruktioner, såväl visuella som auditiva, löper större risk att störa upplevelsen i miljöförstärkt ljud än i ljudförstärkt miljö. Vidare konstateras att den största bristen i en lösning som bygger på standardutrustning i jämförelse med en lösning som nyttjar dedikerad utrustning utgörs av begränsningar när det kommer till att ange riktning med hjälp av ljudets rumslighet..

Affärssystem har de senaste åren uppträtt som kärnan i framgångsrik informationshantering och agerat ryggrad i många företagsorganisationer. Införskaffandet av rätt system är en komplicerad process, men ofta avgörande huruvida en framgångsrik implementering skall fortskrida eller inte. Perioden då företaget inskaffat ett system till den definitiva utrullningen är således ofta en krävande och kostsam process för organisationen. För att avgränsa begreppet affärssystem har vi valt att använda Gartner Groups definition: ?A collection of applications that can be used to manage the whole business?.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

Syftet med rapporten var att studera möjliga återvinningstekniker för Ragn-Sells. För detta användes litteratursökning och intervjuer. Återvinningstekniker som studerats är mekanisk bearbetning, mekanisk återvinning, kemisk återvinning och viskostillverkning. Flera underklasser till dessa metoder studerades också, liksom flera sätt att tillverka återvunna produkter. Rapporten nämner ett urval av återvinningstekniker och försöker inte nämna alla tillgängliga återvinningstekniker.Återvinningsteknikerna har sorterats enligt prioriteringen i EU:s återvinningsdirektiv (2008/98/EG).

This master?s thesis is a remote sensing study of an area-based method used to detect forest in need of thinning by use of laser data and field samples. Only pine-dominated forest has been included in the study and height limits were set to match empirical restrictions. The study area was in the municipality of Älvsbyn (Latitude 65° 40´ N, Longitude 21° 00´ E), in northern Sweden.The Swedish authority Lantmäteriet is currently laser scanning most parts of Sweden, providing new opportunities and applications. The primary aim of the national laser scanning is to create a new elevation model, useful in consequence analysis of climate changes.

Pomace is the solid remains (i.e. stems, pulp, seeds, and skins) after pressing for juice. The annual production of apple pomace is 593 000 ton worldwide. Its field of application depends on local conditions. In order to investigate the field of application of apple pomace in the Southern Sweden, six persons on companies with production of apple juice were interviewed.

Today there are many applications of digital terrain models (DTM) and the requirements of low uncertainty increases. Most of the DTM are produced with Global Navigation Satellite System (GNSS), terrestrial laser scanning (TLS), airborne laser scanning (ALS) and total stations. Guidelines for the preparation and verification of DTM are found in Swedish Standards Institute ? Technical Specifications (SIS-TS) 21144:2007 and SIS-TS 21145:2007. These were defined in collaboration between Swedish National Rail Administration, Banverket, and Swedish Road Administration, Vägverket, to satisfy the needs of requirement formulations in the production of DTM planning, design and construction. The purpose of this paper is to produce and control DTM over Åkermans kulle, located west of the University of Gävle, according to SIS TS 21144:2007 using GNSS with network-RTK, TLS and ALS.

Today when new and harder demands on CO2 emissions are developed, vehicle manufacturers must work to develop new engine solutions to new kinds of fuels to replace fossil fuels. A fuel that could be applied is hydrogen. When hydrogen is combusted only water vapor occurs. Hydrogen is known to be explosive and flammable. These properties are both good and bad for combustion.