Return handling is often regarded as a slow and complex process. Studies have shown that it is not unusual for a return to cost up to nine times as much as a standard outbound delivery. An efficient return handling process is therefore essential to all competitive companies dealing with logistics. This report investigates, analyzes and gives suggestions on development with the purpose to improve the return handling process at LensLogistics AB in Kista, north of Stockholm, Sweden. The study has been conducted from a deliberately practical point of view in order to suggest improvement suggestions possible to implement and thereby change the entire return handling process.

Laser for material processing possesses a number of advantages which mean that it has been and will be an important component for a wide range of industries' future development. Cutting materials processing is the dominant use of laser technology and has revolutionized the manufacturing industry. The aim of this thesis is to describe the principles of metal cutting by laser, how laser cutting is applied in practice and to identify how Swedish companies are using laser cutting. For the theoretical and technical description of laser cutting literature studies are the primary source of information. The empirical basis for the mapping of the Swedish industry for laser cutting is grounded on a survey; this includes Swedish companies that use laser cutting in their production.

Several technical solutions are ready to step forward as the new generation of propellant, and this report aims to explore the possibility of commercializing fuel cell cars. The report is based on current research and data from today's technology and engineering solutions that are estimated to be commercially realized before 2020.A mapping of today?s different fuel cell options has shown that the most suitable fuel cell option is the Proton Exchange Membrane Fuel Cell, which uses hydrogen as fuel. The report is focusing on a techno-economic well-to-wheel analysis of hydrogen and the energy balance and costs in a system perspective. The basis for this analysis consists of two centralized methods of production, steam methane reforming (SMR), and alkaline water electrolysis.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

The ISO 9000-series is a set of quality standards created by the International Organization for Standardization. The series is intended to provide guidance to companies in the process of deploying an effective quality management system. The series includes the requirements standard ISO 9001. This standard contains requirements on how a quality management system should be designed and how companies generally must work with quality issues. When a quality management system is introduced, if wanted, a quality certification can be implemented.

Hemp is an ancient cultivated plant that came to Sweden in the 1st to 2nd Century and was particularly interesting for use for food, clothing and building materials. Over time, other applications have been developed for hemp, e.g. in energy and health products. Interesting new uses for hemp continue to be identified and this fascinating plant has incredibly versatile applications.In this project, seed production of industrial hemp in Sweden was studied and evaluated. Five different methods are described, four of which are proven under Swedish conditions.

AimThe aim with this essay has been to investigate how preschools profiling in motor activity training, work to stimulate motor development of children. In order to study this, the main focus for the research has been on the following queries:What characterize motor activity training at the preschools studied?What is the purpose with the motor activity training of preschools which were studied?How do the preschools describe the affect that motor activity training has on children?How do the preschools look at the need for motor activity training?MethodFour in-depth interviews were conducted with representatives of the chosen preschools profiling in motor activity. My selection was based on a strategic sample and this was made by an internet mapping of preschool activities in the districts of Stockholm, and information from the service guide of the town of Stockholm. Then e-mail was sent to ten contact persons at preschool units, and ten preschools were contacted directly by phone.

With new energy directives in place, the Swedish Social Service (SSS) stands beforethe challenge how to reduce the energy demand in its locales. It is a complex matter,as the locales are rented from various property owners and it becomes a question ofhow to reduce the operational electricity and influence the property owners to workmore with energy efficiency. This thesis takes a balanced research approach in threeparts. Firstly a qualitative part in form of interviews with personnel at the SSS and itsproperty owners, secondly a quantitative part of descriptive nature in form of energystatistics and thirdly a literature review of Energy Management (EM) Supply ChainManagement(SCM), Green Supply Chain Management(GSCM) and EnviromentalPerformance Indicators (EPI). This in order to be able to give normativerecommendations of how the SSS should act to reduce its energy consumption in itslocales and provide new insights on how EM, SCM, GSCM and EPI can be applied ineffect.

Today, our cows experience a harder pressure to achieve higher milk yield. To manage this challenge the animal needs first class feeding and treatment. An important aspect of the feeding is to fulfil the need from the cows of especially fiber; and fiber with a sufficient proportion of long particles. Both too much and too little fiber is bad for the wellbeing of the cow, and she might get diseases like acidosis. Many models for feed management have been developed to secure that the animal gets enough of e.g. fiber with a sufficient proportion of long particles.

This study has been done in order to map the supply of vegetarian and vegan food products in Sweden for business clients and consumers. A total of 665 food stuffs were found and classified into six categories. The biggest category was meat substitutes with 302 products and the second largest category was sandwich spreads with 150 different products. Within the remaining categories a varied number of products were found; 86 beverages, 64 cooking accessories, 34 milk free ice creams and 29 plant based yogurts. Of the meat substitutes were 28 only available for business clients.

Common species of freshwater mussels may, like the freshwater pearl mussel (Margaritifera margaritifera) have a drastic decline in number and there is several reasons, like sedimentation, a decline of host fishes, introduction of alien species, nutrition leakages from agriculture and pollutants of medic drugs and poison. Ann Gustavsson made in the year of 2007 a study over rejuventation of freshwater great mussels in nine watersystems and considered that the rejuventation within the populations were all along the line poor. This study orients from her work and points to determine if there is a connection between the poor juventation and pollution of nitrogen and phosphorous from industries and private sanitations. The study was performed with the software program ArcGIS9.2 to take out drainage areas for the concerned habitats and contact was made with the concerned authoritys. When it comes to supervision of private sanitations is it the countys and for industries is it the county administrative board.

The thesis is an examination of the methods that are appropriate and long-term choice to obtain clamping force and secure screw joints in production. The employer, Scania CV AB, transmission manufactures axle gears to all trucks produced in Södertälje. One of the most common assembly elements is screw joints, where the clamping force is essential to achieve a secure joint. Current methods to secure the joint is due much of the friction effect and is an indirect method to measure the clamping force. The clampforce accuracy becomes more widely with torque angle control.

Variation in tuber quality within a single field was one of the motives for a pilot study in Halland, in south-western Sweden conducted during 2002. Quality problems in potatoes have been increasing due to the aggregation of several small fields with different land use history into larger farm units, which are heterogeneous in soil properties and fertility. The study in Halland indicated that both the uniformity and the mean size of tubers may increase from site-specific K fertilization, whereas total yields may be unaffected. The results from this pilot-study with site-specific fertilization showed that tubers reached a more uniform quality and gave a more uniform mean size, while the total yield wasn't affected at all. Site-specific K-fertilization has been applied for some years in Halland with good results. The aim of this study was to test this technique in another potato growing area.

The government regulations for energy use in buildings will be tightened in the future. At the same time the interest in environmental classifications and certifications of buildings is increasing. This has meant a new situation for solar energy. The designs of solar heating systems are often based on experience and/or rules of thumb, rather than calculations and simulations. This thesis examines whether simulation tools, in this case Polysun, are useful in this work.

Södra Skog chose in 2011 to convert the saw mill in Traryd to a gradually refined sawmill of hardwood. In 2009, they had also acquired the hardwood sawmill in Djursdala. This was strategically important for Södra's business since the demand for hardwood products has increased. The standing volume of deciduous trees in Sweden is today approximately 524 million m3sk and it has increased rapidly in recent years. However, the deciduous forests are to a large extent located in areas that are set aside for nature conservation and is thus not available to the industry.The goal of this work is to create a simple and reliable method for mapping of deciduous wood volumes in areas where Södra Skog is operating (Götaland excluding Gotland).The material that is used is raster databases with estimated forest attributes (kNN-Sweden), data from National Forest Inventory (NFI) and forest management plans.