A large proportion of businesses around the world is today ISO 9001 certified and is consequently conducting internal audits on a regular basis. It has however not been possible to conclude that internal audits always add value to the organisation, despite the large utilisation of this tool. Some authors, e.g. Alic & Rusjan (2010) and Wealleans (2000), mean that there are possibilities that internal audits may be used as a value-adding improvement tool. This has led to the emergence of this master?s thesis.The purpose of the case study was therefore formulated to examine how internal quality audits can be made more effective and used as an improvement tool.

 AbstractTitle                                      Continuous improvement ? Motivating ICA´s  personnel to    a greater engagement.Problem                                  Getting ICA: s employees involved with continuing improvements.Purpose                                  To motivate ICA: s employees to a higher degree of commitment and    contributing with ideas and embracing approved improvements. Research questions   - How should the employees be properly motivated to contribute with   suggestions for improvement?  - What message and content should improvements send to inspire the   employees? - Witch channels should be used to capture the employee?s attention? - How can best practice be recognized and how can the knowledge be spread  through the organization?Methodology                          Initially a theory study was completed and from the results a case study were  conducted.Conclusion                             Combining success factors for continuing improvements.  To get the      employees feeling appreciated with their work. Results             By combining ten sucessfactors and trying to see the whole picture.                .

This thesis work has introduced process orientation at the printing company Color Print Sweden AB. The outcome ofthis work is a survey of the work flow at the prepress department. To visualise the production process at the companya comprehensive mapping of the main process, order-to-delivery, has been made. The work has detected a couple ofcritical elements in the existing process. These elements are the following: initial check of material delivered to the prepressdepartment as well as the control made of the plotter print-out, digital test print and plate.

This Masters thesis work describes a comparison between two different methods for estimation of the down channel (base station to mobile subscriber) in Wide-band Code Division Multiple Access (WCDMA). The first estimation method, Optimal Feed-forward Channel Estimation (OFCE), is a conventional method that bases the estimates on data that is known to both sender and receiver, so called pilots. The second method, Decision Directed Channel Estimation (DDCE), is an elaboration of OFCE. It also uses user data for estimation. Simulations show that DDCE, in comparison to OFCE, does not attain an improvement in signal-to-noise-ratio (SNR) for high bit error rates (BER).

The term "Project" have become a growing work model that exist in almost all bransches. A project is a work effort made over a finite period of time with a start and a finish to create a unique product, service, or result. Science shows that time limitation has an impact on humans to perform under pressure, which challanges the contributor to deliver. This report contains an examination about project management, both coming from scientific results and an external business. The point of this study is to bring ideas of improvement, which can make the work method more effective in this company..

Assignment Birino AB are aware of the fact that their work tasks can be improved. The author?s assignment is to identify one task and improve it with relevant tools.Purpose See if the authors can improve health and effectiveness by changing the work task.Method The authors have conducted qualitative interviews, a quantitative survey and an experiment to see how the change worked in practice. The data the authors have collected will then be presented with relevant theories to answer our research questions/issues.Conclusion The authors have done a work process that can be used as a tool for change and improvement of health and effectiveness. This process can be implemented in different companies and not just the company that the authors have chosen to work with. .

The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

This Masters thesis work describes a comparison between two different methods for estimation of the down channel (base station to mobile subscriber) in Wide-band Code Division Multiple Access (WCDMA). The first estimation method, Optimal Feed-forward Channel Estimation (OFCE), is a conventional method that bases the estimates on data that is known to both sender and receiver, so called pilots. The second method, Decision Directed Channel Estimation (DDCE), is an elaboration of OFCE. It also uses user data for estimation. Simulations show that DDCE, in comparison to OFCE, does not attain an improvement in signal-to-noise-ratio (SNR) for high bit error rates (BER). An improvement is only seen when the BER becomes much lower than what is common in real situations. In conclusion DDCE is complicated, involves many mathematical operations and gives insignificant improvement of SNR when BER takes common values. It is legitimate to question if it is possible to use the method in a real mobile phone system..

Background: The majority of nurses experience work relatedstress, which can lead to a negative impact on patient care. Thestress can be handled by coping strategies. Aim: To illuminatecoping strategies among nurses experiencing work relatedstress. Method: The study has been accomplished as aliterature study, with a systematic review of scientific articles.Findings: Following coping strategies appeared: problemsolving, long-term strategies, passive strategies, leisurestrategies, social support and mental strategies. Conclusion:Awareness of coping strategies for dealing with work relatedstress, can lead to improvement in patient care..

Abstract The main subject of this essay is conflicts at work and the effect it has on the employee´s health.  I can through various reports read that bad health at workplaces is too high and that conflicts are a reason. What can be done to the work environment so it will be better from a psychosocial perspective? Sweden has a regulation that makes the employer responsible to work for an improvement in the work environment; can these regulations be used in purpose to reduce conflicts?My first question concerns the possibility to establish preventive procedures in the workplace systematic work regarding to improve the work environment. My second question is about the obligations of the employer to attempt to reduce conflicts at the workplace and the third question regards the documenting and monitoring of conflicts and the preventing work to reduce them. The purpose of this essay is to clarify how conflict preventive work can be included in the Systematic work environment management.

This report is a study made at Pallco AB. Pallco is a subcontractor that is specialized on steel and aluminium components.The aim of the report is to show an improvement proposal that leads to a reduction of the storage and improve the flow through the production of one item that is a part of a product that Pallco manufactures.With the increasing competition from other countries who can manufacture with lower costs must Swedish companies try to make theirs manufacturing as efficient as possible and remove all waste. By using the tools of Lean Production it is possible to reduce the costs and increase the efficiency.The method we used is value stream mapping. A map of the present condition has been made and then different improvement proposal were discussed. A map of a future condition has also been designed..

This graduation work is a result of implementing Lean Production using OEE and SMED at Enics Sweden AB in Malmö. Enics doesn?t have an established improvement concept and therefore should this work serve as an introduction to possibly start with Lean Production. A result in this report is that an OEE value has been identified within a common order at Enics. Other results are that an implementation of a Lean-board has been implemented and furthermore, within SMED, a flag that indicates changeover..

As a company it is required to work with strategies to minimize costs such as packaging and logistic costs. The increased market of industrial produced wooden buildings results that the time and the cost which the packaging of prefabricated building elements consume, is experienced to be in greater need of development than before and demands a better solution. The aim with this dissertation was to discover how the development of the handling of the packaging can improve the packaging process. The goal was to present improvement proposals for a simplified and thereby a more efficient production in time and cost perspective.The packaging process which includes packaging, handling, storage and transport were studied. Interviews were made with participants from the market for manufacturers of wooden houses and a case study was made at the company A-hus.

There are different ways of developing a second language. The purpose of this qualitative study is to investigate whether and possibly how music, focused on singing, can improve the development of Swedish as a second language. Through interviews with three vocal teachers, from three different schools in Sweden, and observations of one of the vocal teachers, information about how they work and think about the subject has been collected. The vocal teachers teach groups of second language learners by singing songs made especially for second language learning. The vocal teachers consider singing beneficial in the development of the pronunciation and improvement of the prosody, which affects the students? capacity to sound like a native Swedish speaker.

This report tries to discuss the concept of social sustainability; what it means and how residential development can be made more socially sustainable. This is done by interviewing several and various representatives in JM AB, the municipality of Uppsala and residents of Åriket to explore how JM AB as a housing developer and the municipality are working with issues regarding social sustainability and what the residents in one of the new housing projects themselves think of these issues. The result of these interviews will be compared and analyzed with the prospect of finding common variables and hopefully ways of improvement.This will result in our own recommendations of areas of improvement either by broad initiatives or specific actions to increase the social sustainability. Areas such as meeting places, sustainable functions and joint efforts between different parties. During the work on the report we come in contact with several other areas of interest that we are not able to process ourselves and therefore recommend them for future studies..