The purpose of this study was to obtain an understanding of how the employees at LFV Group Swedish Airports and Air Navigation Services (Luftfartsverket) manage to combine work and family, and put this in relation to the concepts of employer of choice and socially sustainable development. Qualitative interviews were carried out with 23 randomly selected participants at the three largest places of work within the organisation. The results showed that the combination of work and family mostly could be managed but that factors like high workload and feelings of stress affected the participants in a negative way. The main measures facilitating the combination of work and family were shorter working hours and support with domestic chores. LFV can partly be considered an employer of choice when it comes to family friendly benefits but changes could be made for further improvement.

Land consolidation is a major problem in many countries in Europe. In Sweden, mainly the state of Dalarna, there is a strong consolidation of forestland, probably the strongest in all of Europe. The consolidation is a big obstacle for forest management and ownership questions due to the often long and narrow strips of land. One of the main reasons for land consolidation in Dalarna results from the heritage procedure, were land is divided between all of the inheritors. To improve the consolidation large surveys in the consolidated villages in Dalarna are carried out. Many laws have to be followed due to the survey.

Ellos was founded in 1947 by Olle Blomqvist and quickly grew into one of the leading mailorder businesses in Sweden. Ellos Group is in the current situation Scandinavia?s largest ecommercecompany and since 1997 owned by the French holding company Keering. Thismeant that Ellos became a part of Redcats Nordic along with brands such as La Redoute,Verbaudet , Daxon and others.2010 started a project with the aim to develop a logistic model for these products. The resultwas the department Redmap on Ellos that would serve as both a hub and distribution channelfor Northern Europe.

An organization that uses all of its improvement opportunities has a great advantage compared to its competitors. It is an important task when it comes to continuous improvements of every process. Up until September 2007, Husqvarna AB had a suggestion committee who evaluated every suggestion separately and the proposer received a payment if the suggestion was approved by the committee. However, this system did not work satisfying enough to fulfill Husqvarna?s needs and they are now looking for a system that can handle the ideas from the employees in a more effective way.

In modern health care, the quality registry is anexcellent tool to monitor everyday work. Collected data forms a foundation, presented as online reports, from which local work efforts to refine care quality can be performed. All reports are coded manually by specially trained developers. This is a tedious process and hence becomes a bottleneck in the strive for improvement.This thesis evaluates whether an extended way of dealing with reports can fit into the existing work situation, with main focus on the idea of creating custom reports directly within a quality registry. It provides a set of conclusions regarding today's usage of reports as well as the users' general and specific needs within the area.

There are different ways of developing a second language. The purpose of this qualitative study is to investigate whether and possibly how music, focused on singing, can improve the development of Swedish as a second language. Through interviews with three vocal teachers, from three different schools in Sweden, and observations of one of the vocal teachers, information about how they work and think about the subject has been collected. The vocal teachers teach groups of second language learners by singing songs made especially for second language learning. The vocal teachers consider singing beneficial in the development of the pronunciation and improvement of the prosody, which affects the students? capacity to sound like a native Swedish speaker.

In the fall of 2014 a literature review and a scientific study of the topic; "... in the extent to which companies in the industry applies the evaluation of continuous improvement? was conducted at Mälardalen University. These studies are the foundation of this thesis.A strategic improvement is often divided into smaller steps of improvements at each hierarchical level from the top down through the organization. But if there is no response system that can confirm the results of these improvements back through the organization it is very hard to see if the improvements really are improvements or just changes and a waste of resources.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

This degree project is based on identifying and allocation of costs in a packaging section at Electrolux Distriparts in Torsvik.The purpose of this thesis is to identify the costs that emerge when packaging different articles and show how the costs are allocated. The report also contains improvement suggestions about how the company can use the current computer system more efficient.The methods that have been used in order to approach the problem and the collection of information have mainly been literature study, interviews and observation.The work started with answering the questions; which expenditure cost and direct cost exist in the section, how can they be allocated, if improvement can be done and how the flow of information is supposed to happen.In order to answer the questions we used our former experience and the knowledge we achieved by reading literature, interview relevant persons in the company and observations carried out in the section.Through our studies, we came up with an Excel file, which is the groundwork for a template that can be used by the company in different occasions depending on the situation and need. It is important to remember to modify the template if the presumptions change. In the template, we have identified the different kind of costs that emerge when packaging different articles and we have also allocated the costs. In addition formulas and estimations that are necessary for the cost calculation are presented.The work consisted in making the groundwork for a template.

The importance of good information security and safety grows larger and larger for each day in the information society of today. This concerns citizens, companies and public authorities. At the Swedish Transport Administration, the operation of an information security and safety process has evolved over the years to guarantee that the public authority can be trusted by its citizens, cooperating companies and other public authorities. This responsibility has been assigned to the Information Security and Safety Department (Informationssa?kerhetsavdelningen, ITsa?).In this thesis the aim is to review to what extent ITsa? achieves any business benefits for the Swedish Transport Administration, and to analyze, streamline and come up with solutions to improve their workflow.

The purpose of this study is from a case study develop a model that aims to cost effectively improve productivity in a manufacturing production process. The study highlights the importance of having knowledge about customer needs and using a holistic process perspective when improving productivity to identify the relations between the process stations and by this find problems that cause waste and losses in productivity. Tools and methods used to make production more efficient such as single minute exchange of die, spaghetti diagram, 5s and master production schedule is presented an applied in the model to see how these effect costs, productivity etc.Maintenance effects on quality and productivity in a manufacturing company will as well be covered in this thesis. The results and conclusions finally reveals how the process improvement tools, maintenance and production planning for example effects each other and why it is important to establish an attitude in the company where continuous process improvement should be emphasized..

Chunks and Tasks is a programming model based on the C ++ programming language. This programming model is used for electronic structure calculations, among other things.The purpose of this project is to improve the CHT-MPI software library for Chunks and tasks, so that calculations of matrix-matrix multiplications are performed more efficiently than they do with the existing software library. The software library is based on the work stealing method, which is a method the software library for Chunks and Tasks uses for the distribution of the calculation work. The considered way to improve the software library is by modifying the work stealing method in a way that makes the distribution of calculation work happen in a more efficient way , which will lead to calculations performed faster than before.Two different modifications of the work stealing method were tested and it led to two new methods, Method 1 and Method 2, which distributed the calculation work differently. Method 1 did not give results that were compatible with the theory, since the calculation time with this method was much longer than the previous method.

This report is a master thesis performed by Adam Lundin at the company Sandvik Coromants production facility in Gimo. The work started in January 2013 and went on for the duration of 20 weeks, which is equivalent to 30 hp. The project was executed at the department GVR10. The scope of the project was to create a base for improvements in the purchasing process of direct material to the production. The background to the project was that the centralized purchasing department has gone through changes and decision was taken to decentralize the purchasing of direct material to Gimo.

The objective of this thesis is to map the resources and methods used at the department OPPC, at AstraZeneca, and derived from that give suggestions on possible solutions that will increase their productivity.Mapping of the product flow, as well as gathering of process data, has mainly been done using observations, but consultation with the process technicians has also played a great role. Further have theoretical methods been used, based on literature studies, within the areas of Lean production and statistics.The work has incrementally gone forward since the steps taken has been restricted by the irregularity of production which led to the need of creating a fictive production flow. This has affected the lead-time calculations in the way that they are meant to give an indication, rather than an absolute truth, on how different methods described shall be used.The current state analysis showed multiple areas of improvement when defining capacity as value adding time in relation to total throughput time. Using the "standard scenario" as a basis showed that the actual production flow only constituted 50% of the total project time. Further it showed that the workflow contained more non-value adding activities than value adding activities, which is a result of how the work is distributed within the department as well as in the different projects.

The company is currently in a stage of improvement and has therefore taken the help of students at School of Engineering, Jonkoping University. The current production is batch, production layout is fixed. A bottleneck is created after the first station which leads to large efficiency loss.  The meaning of this report was to provide a layout suggestion with balanced workstations to a new production line. The conditions were that the production line would be one-way, driven by customers order and meet a demand of 40 products per week.