This paper deals whit the problems concerning social organisation in the county of Dalarna in middle Sweden during the Middle Ages 1050- 1528. This paper also deals whit the every day ife in Dalarna during the same period. In the paper archaeology, ethnology, history and osteology is used in order to create a so accurate as possibly picture of every day life at the farm, the villa and the keep. Each environment is compared to each other in order to try to see the social structure of the county. The geographic frame for the paper is the part of Sweden above the border zone of Limes Norrlandicus, or lower Norrland.The results presented in the paper shows that Dalarna most probably had a flat social organisation in the meaning that the every day life and its artefacts was much the same in all the environments.

Today there is a widespread opinion that the woodmarket and the forest industry are dominated by a traditional way of thinking and not adapted to the customers of today; a lot of products are produced purely on routine. Also, there is a demand for improving the quality of sawn woodproducts. AB Karl Hedin wants to sort this out by increasingly adapt their products to the demands of the market, i.e. through introducing a short wallstud of standard length, "Hedinregeln". At tirst, the wallstud will be produced in lengths of 2,70 m and of guaranteed quality.

In the west part of Trelleborg, on previous farmland a new society is under construction. It is situated right next to the ocean and close to the European freeway. Eight types of villages, all with different kind of architecture will be built in the area, one of them is Torns Village built by Skanska and Ikea. A concept called BoKlok. This specific village consists of twelve houses and five apartment buildings. They are all somewhat classical in their appearance with wooden panel, but at the same time they have a modern touch.

Tylö AB is the leading manufactor of sauna cabins in Europe, but there is a lack of a sauna lightning produced by Tylö. The project of developing a new sauna lightning series was assigned two students at the developmentengineering program at Halmstad University. The main problem with lightning in the sauna is the heat and security aspect. The selection fell on LED technology as the lightning source, thanks to its small measures and low heat emission. The work of constructing of a lightning armature which the capability of cooling down the LED lightning was carried out during autumn ?06 and spring ?07.

Tylö AB is the leading manufactor of sauna cabins in Europe, but there is a lackof a sauna lightning produced by Tylö. The project of developing a new saunalightning series was assigned two students at the developmentengineeringprogram at Halmstad University. The main problem with lightning in the saunais the heat and security aspect. The selection fell on LED technology as thelightning source, thanks to its small measures and low heat emission.The work of constructing of a lightning armature which the capability of coolingdown the LED lightning was carried out during autumn ?06 and spring ?07.

Denna avhandling behandlar stegljudet i två trähus på campus i Växjö. Staden lyfts ofta fram som en bra förebild inom miljö- och klimatfrågor. Det kommunala fastighetsbolag som äger, förvaltar och bygger universitetets byggnader är intresserade av dessa frågor när nya hus ska byggas. De två senast byggda husen är byggda med trästomme, som anses vara ett bra miljöval. Framtida hus förväntas även de byggas med trästomme.

This thesis is based on an exhibition at the county museum Upplandsmuseet in Uppsala, Sweden. During an internship at this museum I got a chance to produce an exhibition, with some guidance from the museum staff. This exhibition was created with the purpose of teaching about agriculture in the late 19th century and also about the magnificent workmanship of Alrik Klingberg, who have carved these wooden objects for over 50 years. Each one of the objects possesses a story and a memory. The memories that Alrik Klingberg has incorporated into the objects are mainly from his childhood at a croft in northern Uppland.

This thesis deals with different methods for measuring moisture-related dimensional changes ofwood. Typically relative humidity is measured to determine if the ambient climate around anobject is harmful to it or not. Values between 40 to 65% RH are recommended for hygroscopicmaterials. To know how a wooden object actually reacts to changes in the surroundingenvironment requires methods that involve the object itself. Because of the wood anisotropy,differences in wood structure, finishes and other restraints, it is not always possible to predict themovements.This paper addresses various measurement methods, primarily methods that have been testedin the field of conservation, with examples of their use.

Actinomycosis is a rare, deep-seated infection of the jaw of cattle that include the progressive enlargement of bone structures. It is caused by Actinomyces bovis, a gram-positive rod found as a normal commensal of the alimentary canal in otherwise healthy animals. This paper shortly describes Actinomyces bovis and its ability to cause "lumpy jaw" or actinomycosis in cattle. It will describe its pathogenesis, diagnosis, treatment and some clinical presentations. The incidence of symptomatic actinomycosis infection is quite low in Sweden today.

The acoustics in a control room is a complicated phenomenon. Early reflections, reverberation time and area in the room are some of the problems. This report is about the reflection on the mixing console in a control room. The control room being built, these reflections are difficult to take into consideration since the mixing console is one of the very last items you place in the room. This report will explain three main measurements that were done in order to get the answer to the following question: Does the mixing console interfere the frequency curve at listening position? Three measurements were done and the difference between the measurements was that the microphone and the loudspeakers were placed in different places in the control room.

The construction industries are relatively conservative type of business that takes a longtime to adjust for new methods and embrace new ideas. It dose not matter if the newmethod seems to be an improved method as long as it is new and untried. Constructioncompanies are reluctant to change form a longtime working method to a relativelyunknown method.The purpose with our report is to perform an evaluation of BeWi construction method.Our goal are to present the generally opinion about BeWi from the contractors that hasbeen in contact/worked with the method. We also want to know from the contractor?spoint of view if BeWi and the method measure up to the standards that are presented byBeWi and if they believe that improvements need to be done.Our progress up to the final report has consisted of three parts[1]Field studies[2]Interviews[3]Literary studiesWe started out with field studies where we took notes and observed all the includedworking phases on the construction site when using the BeWi method.

Title: Playing techniques of the eight-keyed traverso in Irish and Breton traditional music. The dissertation examines basic aspects of playing techniques of the eight-keyed traverso, as it is used in Irish and Breton traditional music. The background material consists of four interviews with four professional flute players as well as literature that considers the subject from different perspectives. The results reveals a consensus between those of the informants that are mainly playing Irish music while the informant that is mainly playing Breton music has a different approach to several of the technical aspects examined.Examensarbetet behandlar grundläggande spelteknik på åttaklaffig traversflöjt inom bretonsk och irländsk folkmusik. Studiens underlag består av intervjuer med fyra professionella flöjtister samt av litteratur som belyser ämnet från olika perspektiv.

The survey aims to shed light on traditional and contemporary bottom floor frames, their construction and different insulating materials; mineral wool, wood shavings and charcoal. The purpose is to analyze and discuss the similarities and differences as well as the pros and cons with a focus on the construction and the different insulating materials. The work has been limited to comparing two different wooden floor frames. The first one is based on a real floor frame from an older building, this example is presented as the traditional floor frame in this study and are from around 1940. The other floor frame is presented as a contemporary floor frame and is based on wood building type descriptions and literature.

In the current situation a big part ofthe settlements that exist in Sweden isin need of renovation and energyefficiency in order to survive.Therefore, also many of the older houseswith a wooden structure are in a need ofenergy efficiency, which can be done ina variety of ways, including addinginsulation.This project deals with whether the useof a diffusion barrier or a vaporbarrier affects a wall structure byadding insulation to an older house witha timber frame. The insulation materialswhich are concidered in thisinvestigation are mineral wool and woodfiber insulation. Efforts are focused onthe effects of moisture on theseinsulation materials.To demonstrate the differences thatarise the moisture measurement programWUFI have been used to simulate avariety of wall designs. These designsare developed in consultation with theconstruction carers who are active inthe industry.Using WUFI graphs illustrating themoisture levels of the wall structureswere obtained and from these conclusionsvould be drawn. The work demonstratesthe differences that arise when using adiffusion barrier or vapor barrier inwall construction.

The knowledge of value-enhancing factors in condominiums is very important for real estate agents when valuing condominiums, but it is also of interest to the owner for an upcoming renovation and sale. Previous research has sorted out the most fundamental factors affecting value of condominiums such as location size, age and condition.The purpose of this paper is by consumer?s actual preferences regarding various attributes identify the most value-adding factors in condominiums. Thereby we want to add and nuance previous research.This has been done through a quantitative method in which possible buyers have ranked how various attributes affect their willingness to pay. The results were analyzed and the median of the various attributes have been recognized.The result shows in accordance with previous research that the location is the primary value-adding factor.