Serpula lacrymans infestation has become an increasingly common problem, and is usually perceived as a tip of an iceberg.During the 21st century there has been a perceived increase of damage caused by serpula lacrymans, at AB Mats Fransson Saneringstjänst ? Anticimex in the county of Kronoberg. A similar increase has also been noted by employees at the offices in Kalmar, Karlstad, Piteå, Stockholm, Malmö, Söderhamn, Halmstad and Visby.The methods used to collect data for the project has been interviews with a number, for the project, relevant key persons, such as analysis engineers at Trygghansa and Anticimex, as well as personnel at the botanical institution at Gothenburg University and the Botaniska Analysgruppen in Gothenburg, further statistics from SMHI and analyses of reported instances of infestations have been used.The majority of the people interviewed believe that the increase is caused by renovations of old houses, higher precipitation during the summer months, as well as a moister climate and warmer winters. The latter can also be gleaned from statistics from SMHI concerning temperature, precipitation, and relative humidity.Analysed damage reports show that the most common cause for the infestation is ground moisture, even when combined wooden materials.Older houses that where built around 1900 are the ones most frequently infested with serpula lacrymans. The part of the building most frequently infested is the foundation, where cellars and suspended foundation are the most common types to be infested.

I vissa takstolskonstruktioner kan det ibland uppstå stora tryckkrafter i diagonala reglar. I Sverige löser man oftast detta med hjälp av stagning tvärs diagonalen för att hindra utböjning i veka riktningen. Ibland när det är svårt att på plats trä in strävor på grund av utrymmesbrist och dylikt kan man spika eller skruva på en regel för att på så sätt förstärka den diagonala strävan. Detta examensarbete har undersökt två olika förstärkningsalternativ, rektangulärt- och T-tvärsnitt, med hjälp av reglar med dimension 45x95 mm2 vilka skruvas respektive spikas ihop. Detta har gjorts laborativt genom att trycka provkroppar i en provningsram och undersöka hur mycket den axiala kapaciteten ökar med förstärkning.

I vissa takstolskonstruktioner kan det ibland uppstå stora tryckkrafter i diagonala reglar. I Sverige löser man oftast detta med hjälp av stagning tvärs diagonalen för att hindra utböjning i veka riktningen. Ibland när det är svårt att på plats trä in strävor på grund av utrymmesbrist och dylikt kan man spika eller skruva på en regel för att på så sätt förstärka den diagonala strävan. Detta examensarbete har undersökt två olika förstärkningsalternativ, rektangulärt- och T-tvärsnitt, med hjälp av reglar med dimension 45x95 mm2 vilka skruvas respektive spikas ihop. Detta har gjorts laborativt genom att trycka provkroppar i en provningsram och undersöka hur mycket den axiala kapaciteten ökar med förstärkning.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

Uppsatsens syfte var att studera industriellt köpbeteende för branschen för prefabricerade trähus. En teoretisk studie har därför genomförts där köpsituationer och dess påverkan på köpprocessen, köpbeslutsgruppen samt kriterier för val av leverantör studerats. Datainsamling har skett genom telefonintervjuer med tre av Sveriges fyra största byggföretag, intervjuerna har genomförts med personer med god kunskap när det gäller inköp av prefabricerade trähus på dessa företag. Resultatet av vår uppsats visar att den den vanligaste köpsituationen för företag som köper prefabricerade trähus är nya köp men att det även förekommer direkta återköp främst genom avrop på ramavtal. De personer som ingår i köpbeslutsgruppen är initiativtagare, användare, köpare, influerare, beslutsfattare och informationsbevakare, vilket överensstämmer med teorin.

For many years, there has been a housing shortage in Sweden. Many have been expecting a construction boom in the housing sector, but that has yet to arrive. With the current legislations and guidelines surrounding modern, energy efficient housing; production costs have increased dramatically in recent years. As a result, having a negative effect on housing production despite the high demand for homes.This exam work is carried out on a construction project of Sjötorpshus AB and its purpose is to evaluate how to optimise the construction process for the production of a new residential settlement, "Kv.Hunden", located in Katrineholm. In an interview with the company's MD, Pär Knutsson, four main issues were defined to focus on.

I samband med att intresset för att bygga högre trähus har ökat så krävs nya lösningar för att t.ex. kunna möta efterfrågan på stora öppna ytor och långa spännvidder. Träbjälklag med lång spännvidd har dock oftast svårigheter med att klara kraven på svikt och vibrationer. Ett nyutvecklat förslag på träbjälklag som förmodas klara dessa krav bättre än traditionella träbjälklag har varit utgångspunkten för detta examensarbete där syftet har varit att undersöka bjälklagets styvhet. Detta gjordes laborativt genom att bygga och testa en prototyp av det föreslagna bjälklaget och genom att en numerisk modell baserad på finita element metoden togs fram och användes för att studera hur olika parametrar påverkar bjälklagets styvhetsegenskaper.Bjälklagets design bygger på fackverksprincipen i primärriktningen och på balkverkan i sekundärriktningen.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

Do our imaginations of real landscapes get affected by works of art such as paintings, myths and literature? They often give very colourful descriptions in words as well as pictures. Do they actually change our feelings for the landscapes we are in and carry around as images inside? Close your eyes and take a few deep breaths. Imagine that you are leaning against a wooden fence a mild summer evening.

The thesis has investigated the use of templates in timber framing, a field where there has previously been a lack of comprehensive and clear information. The main goal was to map and describe the various types of templates, their appearance, usage, and function, in order to make this traditional craft more accessible to both professional craftsmen and DIY enthusiasts. The project also aims to contribute to the preservation of traditional building crafts, in alignment with UNESCO's Convention for the Safeguarding of Intangible Cultural Heritage. The methodology used in this study was a literature review, where relevant templates were gathered and analyzed. The templates were then categorized using a system developed by the author, which helped simplify the understanding of the templates functions and uses.

Syftet med uppsatsen är att undersöka befintliga trähusproducenters förutsättningar och intresse att bygga flerfamiljshus med bärande trästomme med fler än två våningar. För att nå vårt syfte har vi satt oss in i marknaden för höga trähus. Detta har vi gjort genom att initialt betrakta dels marknaden ur olika intressenters perspektiv, dels genom att undersöka företagen som finns på marknaden idag och placera in deras respektive byggsystem i en produktlivscykel. Vi har därefter satt oss in i marknaden för trähus och fokuserat på tio företag som vi har djupintervjuat. Vi beskriver sedan de samband vi ser mellan förutsättningarna på marknaden för höga trähus och intervjuresultaten.

The purpose of this essay is to examine and explain how the Swedish mining court of Stora Kopparberget (the Great Copper Mountain) implemented its judicial legislation between 1641-1682. Questions are asked about which counts of indictments the court tried, which sentences they handed out, in what quantities and how these results looks in comparison with other contemporary courts. The index cards of the court judicial protocols are the primary source of information. The methods are those of quantity- and comparative analysis.The results show that theft of copper ore was the most common crime ransacked by the court. Other common crimes were (in order): sin of omission, transgression of work directions, fights, slander and disdain, trade of stolen ore, failing appearance in court etc.Fines were by far the most common sentence followed by shorter imprisonments, gauntlets, loss of right to mine possession, twig beating, loss of work, penal servitude, banishment, ?wooden horse riding? and finally military transcription.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

Passive houses are a relatively new concept in Sweden and by that it is meant a house without a traditional heating system. The most acknowledged passive house project is the terrace houses in Lindås, Gothenburg, which we have used as a reference. This project concerns a square apartment block. So far, no square apartment block has been built as a passive house in Sweden.The common opinion in the construction industry is that it is not economical to build extremely energy efficient houses. With Peab as commissioner our task was to investigate if that is true, if regarding the construction of a multi storey house as a passive houseMidroc, now owned by Peab, constructed in the block of Preussen in Jönköping during 2004-2005 four houses, with 132 apartments distributed on seven floors.