All products will eventually end up as waste, which in a sustainable society has to be handled in an efficient and environment friendly way. This report focuses on waste fractions meant for combustion, often difficult to characterize. However, more homogeneous fractions that are treated biologically are also discussed.The study concerns the region of Borås, Sweden, where the waste plant Sobacken has provided a good starting point. On this site, fuel to the Energy-from-Waste plant of Borås Energi is prepared and the biological waste is treated through anaerobic digestion.One important part of the study has been to collect experience-based knowledge from the technical staff at Sobacken and Borås Energi. This information was compiled into an overview of wanted and unwanted fractions to the preparation plant and the boilers respectively.

As a result of an increased consumption, waste volumes has grown steadily throughout the 1900s, and this puts great demands on an efficient and ecological sustainable waste management on both local and national level. In order to evaluate collection and disposal of household waste, a large number of Sweden´s municipalities are using waste analyses. The overall aim of this study has been to summarize and assess results from waste analyses executed in Härjedalen´s municipality during the years 2007-2011.The evaluation has given information about the household waste´s composition, quantity and change in time. The report´s objective has been to create a basis which the municipality can use in planning of future information efforts and other measures, and give some proposals on how these can be designed and targeted. Therefore, the report also highlights research on motivations factors that affects environmentally conscious behavior such as recycling, and how different instruments like information can be used to promote this.

This thesis concerns waste management on construction sites and was conducted on behalf of ICA Fastigheter.Areas of concern:How can an environmentally-efficient waste management system on construction sites be defined? What potential exists for exploiting the waste resources that are generated?How can the waste management be optimised by reducing the quantity of waste and by optimal sorting?How can the client of a project influence the waste management?The purpose of the work was to investigate sustainable waste management in the building and construction sector and to highlight waste as a resource from an environmental and economic perspective.The aim of the work was to define an environmentally-efficient waste management system, to analyse the potential that exists in waste management and to draw up guidelines for optimal waste management.The method consisted of a literature study, two visits to construction sites and four interviews.An environmentally-efficient waste management system means that the waste is managed in the following order of priority:Prevention     Reuse  Recycling     Energy recoveryLandfill     The prevention of waste is an important area that has not been adequately explored by the building and construction industry. The quantities of waste could decrease with the implementation of measures such as ordering materials in the dimensions required, prefabricated components, logistics centres with Just-In-Time deliveries, less and improved packaging and less wrapping. The reuse of waste materials and temporary apparatus as well as the use of a return pallet system are examples of reuse that reduces the quantities of waste.In most cases the source sorting work is a matter of course and the proportion going to landfill is down at a low level. The source sorting can be optimised by sorting all materials that can be reused and recycled to use them as a resource.

The waste fractions offered to households in Sweden differ depending on where you live. The responsibility for the waste are grounded by the Swedish law where the municipality are responsible for the collection of household waste and FTI are responsible for collecting all packages and papers that the households sorts out. A new waste regulation is under consideration where the responsibility for the household waste may change. The bulky waste from households is collected at recycling centers where the households leave it in different containers for different fractions. These recycling centers are formed different and the fractions offered in them also differ depending on in what municipality they are located.

The purpose of this report was to identify the current waste management of non-hazardous construction and demolition waste in a few Swedish construction companies, based on the different steps in the waste hierarchy with a focus on waste prevention, reuse and recycle. Additionally, the purpose was to attempt identifying opportunities, obstacles and as well as to propose possible solutions from an environmental perspective. The method used was a qualitative study using interviews conducted through emails and phone with employees occupying positions that could answer this reports questions. The results of this report indicates that waste management of construction and demolition waste has improved, and less waste goes into landfills. The concern is that the overall amount of waste being produced is not decreasing, thus calling for actions preventing the production of waste.

Outside of many Swedish households today, you will find a typical green wastecontainer. This container has not changed since its introduction, despitecomplaints about foul-smelling and its impractical system. Even if the system usedtoday, still is the most optimal choice, there is a lot of newly developedalternatives out there.Its purpose is to get a broader perspective on how a waste management systemcan be developed into a working, land efficiently and aesthetically pleasing systemof humans and the environment in a small residential area.The authors treat the residential area of Jära, Ekhagen, in Jönköping, which ismanaged by JM AB as a problem area in regards to waste management.The issues raised by the authors are the different waste management systems usedin the corresponding areas of the world, how to apply technical andenvironmental as well as the waste management facilities from financial aspects.In the process, the methods used were literature reviews, case studies and aninterview. The case study was done through a modeling of waste managementsystems in the area Jära and an interview was conducted with the company Envacworking with vacuum systems. Studies have been made by different systems n theareas around the world.The results show that using directives and guidance will reduce the environmentalimpact done without replacing the traditional system.

LKAB is an international high tech mineral corporation and a world leading manufacturer of refined ironore products for steal manufacturing and other mineral products destined other industries. LKAB is an international corporation with companies world wide, with it?s main location in the north of Sweden, which is where the iron ore mines and the refining works are located. LKAB?s iron refining process in Vitåfors, Malmberget, is a source of great amounts of waste-rock.

My essay is about a dilemma that came up on a preschool that I worked in. My purpose with my essay is to examine and to get an understanding for what children with attachement and separation anxiety goes through, and how a preschool teacher the best way can help them.The background story is about a boy named Sixten (not his real name). When separated from one of the preschool teachers Sixten exhibits a great deal of separation anxiety. In the story I give some clear examples of situations where Sixten displays this separation anxiety. I have in the essay viewed it from different perspectives and I have questioned my own role as an educator, but also my entire team.

The purpose of this study is to compare the energy related and environmental consequences of implementing optical sorting as a means of waste collection with those of reducing food waste. In addition to studying the possibility of implementing optical sorting in downtown Stockholm, the yielded amounts of energy from waste collection and reduced wastage will be calculated. This is done by way of literature reviews and interviews. The amount of energy that can be generated through optical sorting and biogas production via anaerobic digestion in downtown Stockholm is 29-44 TJ/year, compared to 118 TJ/year saved by completely eliminating food waste. The generated biogas can replace fossil fuels, but the required food waste contributes to increased greenhouse gas emissions as well as reduced bio diversity and eutrophication during the wasted food?s lifecycle.

Abstract (in English)During the last fifty years, the waste in an average Swedish household has increased by about five hundred percent. In order to manage (eller take care of) all of this new waste, Swedes need a method of facilitating the handling process. In this report, both the habits and needs among private households across Sweden are investigated, followed by a pertinent solution to the waste problem. This solution is a container with two compartments, using the standarddimensions of a grocery store paper bag..

Allt fler barn i Sverige upplever en skilsma?ssa eller separation, vilket medfo?r ett va?xande ja?mlikhetsproblem da? tidigare forskning visat att fo?ra?ldrars skilsma?ssa eller separation kan ha negativ inverkan pa? barns skolprestationer och utbildningsniva?. Utbildning anses vara fundamental fo?r ma?nniskors livschanser senare i livet och vid en skilsma?ssa eller separation minskar fo?ra?ldrarnas mo?jligheter att sto?dja sina barn i deras utbildning. Med detta som utga?ngspunkt a?r syftet att underso?ka om barn med skilda eller separerade fo?ra?ldrar tenderar att ha fa?rre utbildningsa?r ja?mfo?rt med barn i intakta ka?rnfamiljer.

The purpose of this study has been to make an inventory of combustible waste in the region around Norrköping and to investigate the composition of domestic waste, industrial waste and two different types of sludge. The work was performed at the request of Norrköping Miljö & Energi, due to the planning of an incineration plant. The inventory of the waste was performed through inspection of environmental impact reports, from waste disposal plants in a number of local government areas in the region. The quantities were also compared to another inventory, carried out in a different way. The characterisation of the wastes was compared to the fuel specification determined by Norrköping Miljö & Energi.

This report deals with issues related to construction waste. Building material that has not been built into the project is defined as construction waste. Cost of construction waste amounts to 4-12 % of the total cost of the project. Moreover, cost of construction waste is 1-3 % of the production cost. The aim of this study is to increase knowledge about the main causes of waste within the construction industry.

Micronic Laser Systems AB produces and develops machines for the photo mask production market. One of their products is the Omega machine which exposes photo masks using 5 laser beams simultaneously. It is important that the distance between the each laser beam, the x-separation, is the same. The x-separation is today measured by exposing a photo mask with a certain pattern and thereafter measured with a metrology system. This takes to much time and it is desired to find a faster method to measure the x-separation without loosing precision.The task for this master thesis is to improve an existing measurement method which uses a calibration mask.

This has been a thesis work for an bachelor degree at Umeå university. The work has been done at LKAB?s facilities in Kiruna and its main purpose has been to investigate and construct some conceptual designs for replacing a screen with magnetic separation in KA3 concentrator plant. First all information available about magnetic separation was gathered and studies of magnetic separation at the sorting plant and studies of the plant KA3 was conducted. Companies that manufacture magnetic separators were contacted.