The purpose of this report was to investigate what characterizes a good psychosocialwork environment, and whether it may have impact on a vessel's safe voyage. Thisreport is proposed to increase the understanding of what creates a good psychosocialwork environment and its potential effect on safety at sea. In order to find out thesuccess factors for a good work environment group interviews were conducted in socalledunstructured focus groups. During these conversations, the participants discussedfreely by the question "what is a good psychosocial work environment for you?? Thesuccess factors were thereafter applied on selected accident reports, to investigate theextent to which they were represented and taken into account.The results of the study show three categories of factors: colleagues, communicationand competence, where colleagues are the main contribution to a good psychosocialwork environment.

Detta examensarbete är ett projekt som utförts på uppdrag av Sunnex Equipment AB. Syftet var att utveckla nya ledade armsystem till en medicinsk belysning för att ersätta de tre armsystemen som marknadsförs av företaget idag. Det var även önskvärt att projektet resulterar i ett förslag på utformning av ett tillhörande lamphuvud. Fokus har varit design och ergonomi. Arbetet har följt en strukturerad produktutvecklingsprocess som inleddes med informationsinsamling genom användarstudie, intervjuer, konkurrensanalys och litteraturstudier.

This essay consider ritual death during the ironage, and through a presentation of historical and archaeological sources. Considered ritual death I think we should study both historical and archaeological sources, to get a vider view and a new perspective. To make the essay easier to understand I have split up the early and the late Iron Age in the discussion. In order to study the ritual death I have shown archaeological examples like bogsacrifices in the early ironage, and decapitated victims in the Viking society. The victims have been considered as slaves by some archaeologist.

Den här rapporten avhandlar arbetet med att ta fram ett förslag som förlänger Volvos kärnvärden - kvalitet, säkerhet och miljöhänsyn, ut i Utvecklingsverkstaden på Volvo Construction Equipment, Hauler Loader Business Line, i Eskilstuna. Förslaget är utformat som ett koncept, som ska kunna överföras till andra verkstadsmiljöer på Volvo, om så önskas. Idéförslaget har baserats på en studie av den befintliga Utvecklingsversktaden. En modell av verkstaden i skala 1:50 utformades som presentationsmedium.Vid examensarbetets slut har förslaget presenterats och utvärderats av målgruppen. Den primära målgruppen har varit de anställda på avdelningen.Slutsatserna av arbetet är att en informationsbärande interiör kan formges för att representera ett företags kärnvärden och visa på innovation och framtidstänk.

Sapa Heat Transfer is a company that produces aluminum heat-exchanger strips for the automotive industry. Sapa Heat Transfer wish to chart their emissions of carbon dioxide in order to meet future demands on carbon dioxide reporting. They also would like to examine the meaning of the term ?green electricity? which is marketed as carbon dioxide free, and the sort of electricity that they purchase. This report includes both direct (liquefied petroleum gas and diesel) and indirect (water, process-water, long distance heating, waste) emissions from their company.

Radio Frequency Identification, RFID, is a convenient way to enable contactless identification which does not require any physical nor optical contact. As with any radio-based communication the signal can be intercepted, thus making the technology vulnerable to several kinds of attacks. Interception of communication is not the only threat. Since RFID tags might contain personal information or information that will grant the owner access to secure areas, skimming and spoofing attacks are also major threats against this technology. In this thesis report,  the perspective of an adversary is portrayed in an RFID-enabled environment by presenting where RFID is used and how it could be abused.

This report is based on a thesis that was carried out during spring 2012. The report covers the development of a preliminary study to Performance Sk8. The purpose of the study is to facilitate and contribute inspiration to Performance Sk8 to run an automation project to bring home their production to Sweden from China. The reason is to gain a greater ability to control quality, produce smaller batches and reduce the cycle time to reduce costs.The goal is that the preliminary study shall meet the requirements and wishes Performance Sk8 and other partners defined. The pre study will contain different cost proposals for the automation of selected process and serve as a basis for procurement of the equipment.The pre study has resulted in some proposed solutions to the various steps required to automate Performance Sk8 ?s production.

This study investigates how nutrients from source-separated human urine from Gothenburg properties can be used as fertiliser in agriculture or for parks or sports fields. The initiator is the Department of Sustainable Water and Waste Management at the City of Gothenburg. Today urine-diverting systems are installed in two apartment buildings and two public-use buildings. Urine recycling is expected to lead to less exploitation of natural resources and less eutrophicating discharges into water recipients. In the study the urine?s market potential is investigated, for which practical handling issues, business aspects and acceptance of customers, employees and visitors have proved to be important.

Radio Frequency Identification, RFID, is a convenient way to enable contactless identification which does not require any physical nor optical contact. As with any radio-based communication the signal can be intercepted, thus making the technology vulnerable to several kinds of attacks. Interception of communication is not the only threat. Since RFID tags might contain personal information or information that will grant the owner access to secure areas, skimming and spoofing attacks are also major threats against this technology. In this thesis report,  the perspective of an adversary is portrayed in an RFID-enabled environment by presenting where RFID is used and how it could be abused.

Given that the oil prices have risen and the environmental regulations has become more stringent, the interest in operating efficiency has increased. The project has investigated the possibility of producing electricity from waste heat generated in the diesel process. One technique to utilize and convert energy into electricity is the ORC (Organic Rankine Cycle). This process is based on the Rankine process (the steam process), the difference from the traditional Rankine process is that instead of water as a working medium, an organic substance is used. The main component used in the process is a evaporator, a turbine, a condenser and a pump.

This degree project was conducted in collaboration with Gremo AB located in Ätran.The aim of the project was to develop a solution to secure quality and to help assemblingthe locknut holding the vertical hinge on the harvesters and foresters from Gremo.At this time the nut is assembled manually by the aid of an overhead crane. The nut istightened differently from time to time, and there was no specified torque to which it istightened. Another present problem was the locking washer which sometimes getsdamaged during assembly, when this happens the procedure has to be started over fromthe beginning. The current assembly procedure is very time consuming and lengthy forthe employees.Our task was to design a machine that could tighten the nut to a specified torque with amargin of error of ± 3%. The assembly procedure will be held simple and the timerequired at a minimum.The project started by developing several principle solutions, the one solution that bestmatched our specifications were developed to a primary solution.Today we have started manufacturing and assembling our prototype.

The electric car has existed for over a century and producers has tried to commercialize it earlier but has not succeeded. In recent years, however, a change occurred that may be significant for the electric car and it is now to commercialize in the market of passenger cars. The technology has in recent years elaborated as more car manufacturers have started to invest in development in the subject field. This thesis aims to compile an action plan for the development of charging infrastructure for electric vehicles in Uppsalahem ABs residential areas. It is based on a survey of different residential areas and a survey of charging infrastructure.

The work has been carried out in cooperation with the company Zenit Design in Malmö. The project's goal was to restore, improve and produce an ozone generator. During the project, the authors sought relevant literature in databases, been in contact with US suppliers of fuel cell membranes, Asian suppliers for the processing of Teflon and Titanium parts in mechanical engineering and Swedish suppliers of various standard components. The authors had access to a temporary lab at Zenit and electron microscope at Halmstad University where material tests were performed. The authors have also had access to measurement equipment to measure amounts of ozone.During the work, the authors have mapped how an existing ozone generator works and then have their own development.

Detta examensarbete syftar till att utreda vilka skillnader som råder mellan livslängdsprovning för transmissioner i rigg respektive fält för hjullastare på Volvo Construction Equipment (Volvo CE). Hjullastare benämns maskin i den följande texten. Uppgiften har delats upp i tre delar; ? Kartläggning av riggens uppbyggnad samt vilka tester som utförs i rigg respektive maskin i dagsläget. ? Analysera vilka effekter dagens skillnader i testning har på de transmissioner som provas i rigg respektive maskin.

Radio Frequency Identification, RFID, is a convenient way to enable contactless identification which does not require any physical nor optical contact. As with any radio-based communication the signal can be intercepted, thus making the technology vulnerable to several kinds of attacks. Interception of communication is not the only threat. Since RFID tags might contain personal information or information that will grant the owner access to secure areas, skimming and spoofing attacks are also major threats against this technology. In this thesis report,  the perspective of an adversary is portrayed in an RFID-enabled environment by presenting where RFID is used and how it could be abused.