This paper examines the power producing dams along the Ume-river as an integral part of and a result from the urbanization process in Sweden during industrial capitalism. The aim of the paper is to contribute to the knowledge of the urbanization process in Sweden in general and of its traces along the Ume river in the county of Västerbotten in particular. The paper applies the theory of concentrated urbanization and extended urbanization put forward by Neil Brenner and Christian Schmid (2015) and argues that the building of power producing dams along the Ume-river is part of an extended urbanization process. This becomes particularly evident when examining the vast physical structures that is the dams, situated in an otherwise remote and sparsely populated area. These vast physical structures are also very well connected to a nation wide electric grid that has connections to bordering countries as well.

Thesis completed by Johan Arvidsson, Alex Rasooli and Pontus Winroth, students at master program Product development and Design at the School of Engineering in Jönköping Sweden. The project comprises 30 ECTS credits and was carried out during the semester in the autumn of 2007.It was carried out in cooperation with Eksjöverken AB, subcontractor within the truck industry with special knowledge within the area of complicated machinery construction work. Job initiators at Eksjöverken were Mats Svanberg and Kjell Nygard. Dag Holmgren was acting as a tutor from the university. The task was to develop tools for trucks, primary toolboxes but in case of time also under run protection.

Currently, the whole globe is faced with serious problems which negatively affect people around the world: increased pollution, excessive waste, and weather pattern changes. ?Left? and ?right? wing political parties alike have embraced ?green? politics and for many of these parties, environmental issues have become a top priority that is very much reflected in their manifestos. This study examines the environmental goals of two of Sweden?s largest political parties and how these ambitions are reflected at a local level.

The main project Dry preservation of source-separated organic household wastes involves a new technique for treatment of biowaste through drying. Investigations are going on to determine how the dried biowaste best can be used to close the natural circular flow of nutrients. The objective of this degree project is to determine if the dried biowaste can be used as a soil conditioner. By restoring the nutrients in the material to the ground, the natural circular flow is closed. A declaration of contents, including the nutrient levels, C/N ratio, pH and the electrical conductivity of the dried biowaste, was constructed and a germination test was done to make sure that the material did not inhibit sprouting.

A substation must be properly protected against lightning and other external effects to the equipment in the station or staff, for that we use relay protection. They should also protect against internal errors which may occur as ground faults. There are different types of protection relays, but most common are overcurrent-, distance-, residual current- and differential protection.The purpose of this thesis was to deepen our knowledge of relay protection and to use the theoretical knowledge we got from the university studies in the work process. In the process we discovered which parameters were the most essential and calculated these for all relay protections on the substation. We also carry out a comparison between two brands of relay protection, ABB and Alstom.During our work we will test and simulate the over-current relays in a program called NEPLAN, the program will also calculate the fault currents.

This thesis is done in cooperation with SWECO Energuide in Växjö. They have been assigned by SKB in Oskarshamn to renew their electrical power supply and the ancillary processing systems in their Central provisional storage of spent nuclear fuel, CLAB. Today in the CLAB facility, the spent fuel is cooled down with water pumps, driven by asynchronous induction motors, where the water is regulated by mechanical valves to the desired flow. After the upgrade, the engines will be powered by AC drives that can control the pumps by changing the rotational speed and thus change the water's cooling effect on the nuclear fuel. In this study, I investigated the interference AC drives causes the feeding network and how to go about averting them.

This report examines the industrialization of a newly developed household machine on behalf of Technogarden Engineering Resources in Karlstad, Sweden. The report is a part of the final course in the Bachelor Program in Mechanical Engineering at Karlstad University and takes place in spring 2014.An innovator, an investor and a engineering consultant firm have through collaboration developed a new type of gruel machine. The product is in its final stage of construction and is planned to be manufactured in a production located in Sweden, autumn of 2014.To compete against today?s trend in outsourcing manufacturing to low cost countries for better profitability, the industrialization of the gruel machine must be done with a minimum amount of resources in order to become successful, which also describes the problem of this study. Using pre-study material in form of Lean production literature, visiting a successful production site and gathering data from involved engineers a specification was developed which describes what this industrialization must achieve and which requests can be accomplished.

This paper describes the Swedish reconnaissance squads in the engineer battalions, their equipment, tasks and organization. An analysis is made to compare the present weapons and fire power of the reconnaissance squad with an extended weapon alternative. The analysis focuses on the abilities effect, protection and movement in different situations typical of a reconnaissance squad.The facts that are presented in this paper are mostly founded on the new field manual FältarbR Dyktjänst 2007, which regulates much of the reconnaissance activities. The aim of this paper is the making of a contribution in the developing progress of the new field manual and the reconnaissance squads in Swedish engineer battalions.The result of the analysis shows that the extended weapon alternative would be an asset..

The combustion engines in today?s vehicles are getting more and more advanced and there are increasing demands on that the engines should operate during optimal conditions. Examples of internal combustion engine parameters which may be carefully controlled are the rate between fuel and air, that this gas mixture is homogenous enough and that it is ignited at the correct moment. Moreover, the requirements of these parameters vary depending on, among other, engine speed and load. To meet these requirements in all occurring operation conditions, it is required that many subsystems work together.

Calesco Foil AB is a manufacturer of thin flexible circuits for heating or electric conduction.The plant is located in Kolbäck, Sweden.One of the company?s products, the conducting polymer pasta is in present situationunpredictable. Unpredictable in the way that the same type of heater shows differentresistance, depending on which time they have been produced. The desired repetitivelyprocess is almost non-existing.The aim of this master thesis is to primary identify those parameters that effects theresistance, observe and if possible to perform tests on them. The results from this analysisstand as base for recommendations to achieve a repetitive and standardized printing process.The results and the observations from the tests indicate that a repetitive process is possible toachieve.

I en värld där människan är det enda djur som lämnar efter sig avfall som inte kan brytas ned naturligt, är det viktigt att avfallet vi producerar tas om hand på bästa möjliga sätt. EU har därför tagit fram en prioriteringsordning för hur avfallet ska behandlas. Denna kallas avfallshierarkin och ska ligga till grund för medlemsländernas lagstiftning om avfallshantering. I Sverige kallas byggsektorn för den ?40-procentiga sektorn? vilket syftar på att 40 procent av Sveriges avfall genereras av denna sektor.

Logistics and supply chain management in the construction sector is an area with great potential for improvements. Today, a lot of the workers time is spent on non-value adding activities. Research has shown that waste is a large proportion of the total production cost in building projects today.The purpose of this report is to analyze problems concerning logistics in the construction sector. Two of Skanska?s construction projects in Uppsala have been analyzed to identify problems.

The title: ?Klara färdiga GÅ? can be translated as ?Ready steady GO?, and is ment as a request to start move. In this project I want to invite people to walk more by creating creative, demanding and playful walkways and paths, where the body can be allowed to work just a tiny bit harder.It?s because walking means exercise and fresh air, for free and without spetial equipment. Walking can also be fun, it allows people to stop, change direction and experience things.I think activity should be fun, inspired by children playground my project is a contribution to how adults might stay healthier in a city, where too often healthy activity is solely confined to the gym or sports fields.

A substation must be properly protected against lightning and other external effects to the equipment in the station or staff, for that we use relay protection. They should also protect against internal errors which may occur as ground faults. There are different types of protection relays, but most common are overcurrent-, distance-, residual current- and differential protection.The purpose of this thesis was to deepen our knowledge of relay protection and to use the theoretical knowledge we got from the university studies in the work process. In the process we discovered which parameters were the most essential and calculated these for all relay protections on the substation. We also carry out a comparison between two brands of relay protection, ABB and Alstom.During our work we will test and simulate the over-current relays in a program called NEPLAN, the program will also calculate the fault currents.

Results have shown that flow batteries may be a solution in the future as an effective and environmental friendly method to an energy storage system (ESS). The technology is reliable and has a high efficiency that comes with low energy losses and a long lifetime. The range of possible fields is suitable for cutting energy peaks in the power grid, by always have a ready and available energy storage that balances the production. By comparing the advantages of flow batteries with conventional batteries it is mainly the fact that they can conserve energy for a long time without being self-discharged thanks to that the storage capacity is in principle endless and limited by the size of the electrolytes tanks that makes them a great energy storage system. The batteries won?t take any damage or decrease in performance when charging or discharging it or if you exhausts it to 100 % and leave it discharged for a long time.