AbstractPurpose ? The purpose of this study is to examine the challenges that exist within thematerial handling process, to and from a department for service and maintenance at a hospital, and how the challenges can be managed to achieve a more efficient material handling process. In order to fulfill the purpose the following two questions where formulated:1. What challenges exist within the material handling process, to and from adepartment for service and maintenance at a hospital?2.

In the EU the amount of waste increased by 14 percent during the years 2000 to 2010. EU?s target to reduce waste generation runs parallel with the aim of increasing the efficiency and profitability aligned with energy recovery. In Sweden the energy recovery through incineration is increasing steadily, and 46 percent of the municipal solid waste (MSW) is treated by combustion. This report aims to examine the profitability of processing MSW into Refuse Derived Fuel (RDF) from an economic-, energy- and environmental perspective.

Today's fierce competition means that companies constantly must develop their business and internal processes. Focus on processes and continuous improvement is something that characterizes Lean Production which ICA logistics are applying with their concept Leading Logistics. Standardized routines for handling damaged gods were insufficient at the ICA distribution center in Kungälv. Handling and registration of damaged gods were not performed uniformly, resulting in problems with controlling and monitoring the process.The purpose of this thesis was to analyze and make recommendations how the process of internal handling of damaged gods could be improved. Therefore a comprehensive understanding was needed of the entire material flow through the warehouse and important quality aspects such as product safety and delivery reliability.The methods used are literature reviews, interviews and observations to produce a comprehensive process mapping of the current situation at the distribution center.

AbstractResource efficient manufacturing is a term that has been increasingly applied within manufacturing, where one of the key points is to reduce waste of such forms that do not add value for the end customer. By the Lean principles, there are seven plus one types of waste, in which the definition of the eighth point varies among sources. In this study, the eighth type of waste has been interpreted as the untapped creativity and competence among employees that has not been put to use. From this, our question was incubated; How can you make the most of the employees? untapped creativity and potential within manufacturing? The case study will be developed with empirical data obtained from Dometic Group by conducting interviews.From the gathered literature, it was concluded that the communication between employees contributed to an increased understanding of one another as well as it allowed for improvement in work.

Stressful routines for animal handling can reduce immune function and productivity of animals. If stakeholders are handling animals aversively, animals will show increased expressions of fear for humans and higher stress levels which lead to the compromise of animals? welfare. In Ethiopia, there are no legislations to protect animals from suffering or discomfort. The main objective of this study was therefore to analyse welfare of cattle on animal markets in Ethiopia and map out supply chains of animals to these markets.

In the pilot plant at Hammarby Sjöstad, Sjöstadsverket, several new methods are tested in order to achieve a good use of resources. When a new technique is considered it is often the performance of the technique itself, under given conditions, that is evaluated. However, in order to evaluate the overall function the whole picture is needed. With a system analysis it becomes possible to make a comparison where all the positive aspects are put up against the negative ones, for the technique itself as well as its requirements. In this way the influence that minor components have on an entire system can be considered.This report presents a system analysis of an anaerobic membrane reactor (MBR) with a VSEP-membrane (Vibratory Shear Enhanced Process).

The sludgebark and to a certain extent the bark were until a decade ago waste products without any economic value that were thrown away. A number of environmental laws and increcing energy prices have improved the prerequisites for increasing the use of these materials. At Seskarö sawmill they burn the sludgebark and a great deal of the bark in the sawmill furnace. The sludgebark has a number of disadvantages compared to bark during burning. The sludgebark is often wet which means the energy net from burning often gets low.

As a small and land scarce country, effective waste management is ofoutmost importance in Singapore. In this study the production of biogasthrough anaerobic digestion from the organic fraction of municipal solidwaste (OFMSW) was compared to incineration of the waste. At the momentalmost all of the OFMSW in Singapore is incinerated. Three differentscenarios were compared to the reference scenario (incineration): one with alarge scale biogas plant that can treat half of all OFMSW in Singapore, onewith a medium scale biogas plant about 15 times smaller than the large oneand one with a small scale biogas plant that can treat waste from e.g. ashopping center or a food center.By using life cycle assessment (LCA) the different scenarios were comparedin terms of global warming potential (GWP), acidification, eutrophication,energy use and land use.

This master of science thesis is focusing on how the fault handling on hardware connected toa control unit on a Scania vehicle is working. To the hardware counts buttons levers, sensorsand CAN. The work has been concentrated upon how the fault handling is working and if it ispossible to find any new fault modes.The control unit that has been studied is called the Coordinator and is the core in Scanias threenetworks of control units. The Coordinators work is to transmit messages between the threenetworks and to process signals from buttons, levers and sensors. The values is then usedinternally or is sent to other control units on the CAN networks.

The municipality of Västervik, with support from Envipro Miljöteknik AB, is carrying out a main study of the minefields at Gladhammar. Mining of iron, copper and cobalt under different periods from the 16th century until the end of the 19th century has led to discharges of metals to the lakes situated downstream. The aim of the main study is to investigate the possibilities to reduce the environmental load on the surrounding ground and water caused by heavy metals from the mine. The present report is a part of the main study. The aim of the work is to investigate the geochemistry of the groundwater.

The biogas plant Kungsängens gård, owned by Uppsala Vatten och Avfall AB, produces biogas and biomanure from organic household waste, food processing waste and slaughterhouse waste. In year 2012, 4.4 million Nm3 of biogas were produced from 25 200 tons of waste. Before digestion all substrate is sanitized by pasteurization at 70°C in order to kill pathogens. Another method, integrated thermophilic sanitation (ITS), is of interest in order to decrease the energy demand. The method implies that the substrate is sanitized during ten hours in the digestion chamber, where the temperature is 52°C.

Trioplanex International AB is a part of the group Trioplast Industrier AB, which produces packaging materials for the film and hygiene industry. The group is active throughout Europe, where most of the production is located in Sweden, with head office in Smålandsstenar. Operations in Landskrona consist of Trioplanex International AB and Trioplast Landskrona.Semi-finished articles consisting of paper cores, so called bobbins, give rise to a high amount of core waste in any form of core cutting. The objective of the report is to map out all core waste and illustrate the material flow with regard to present layout and equipment.In the beginning of the project an analysis of the current process was carried out with focus on the cutting equipment. A case study in the form of an improvement work took place in order to reduce the causes which had the biggest impact on existing machinery.Improvement proposals were discussed by the author together with supervisor, assigner and other parties involved.

Environmental issues is now taking a growing place in society and to ensure that companies meet public expectations and do their part in working towards a sustainable development, environmental management system is said to be an effective tool (Almgren & Brorson, 2009).This case study has examined a company's environmental management system in order to find strengths and weaknesses within the ISO 14001 system. The work was carried out using interviews, document reviews and analyzes in which the three main concepts control the report ; "daily work", "audit" and "environmental aspects".The results shows that the daily work looks different depending on where you are; in the production or at the office. The audit examined all documents related to the environmental management system and the study showed that the biggest strengths was the commitment and Waste handling while areas such as environmental goals and management review needed improvement. As a result of the deficiencies identified, suggestions for improvements was proposed. The investigation of the routine of the environmental aspects showed an incomplete routine where the red wire from identification to evaluation was missing.

SAMMANDRAGI denna teoretiska uppsats jämförs och problematiseras filosofen Hannah Arendts (1906-1975)begrepp handling och filosofen Judith Butlers (1956-) begrepp performativitet. Genom dettaså jämförs även deras respektive användning av begreppet politik. Syftet med uppsatsen är attproblematisera användningen av dessa begrepp samt att jämföra dem med varandra ochargumentera för de likheter som finns. Ytterligare ett syfte är att argumentera för HannahArendts viktiga bidrag till samtida genusvetenskaplig forskning. !Först redogör jag för Hannah Arendts och Judith Butlers användning av begreppen var försig för att sedan göra jag en jämförande begreppsanalys där jag jämför likheterna mellan derasanvändning av begreppen.Mina slutsatser är att det finns ett flertal likheter mellan Arendt och Butlers teorier kringpolitik och villkoren för det mänskliga.

In 1994 the EU directive of packaging waste was adopted. The result was that all EU member states developed different systems to manage packaging waste and recycling. This paper examines the various systems and the factors that affect the level of recycling. This is done by a cross-sectional study between countries. The results of my study suggest that take-back system generates less recycling than other systems, the mandatory deposit system can affect the recycling in a positive way.