This literature study investigates the natural behaviour of the cat and handling of cats in the clinic. A presentation of tactile, olfactory, visual and acoustic communication is given. The reproductive behaviour of the cat is explained and the development of kittens is described. The study highlights hunting behaviour, territory structures and social life of cats. The report also includes practical instructions to how the environment and handling of cats in clinics can be improved..

The demand for biogas as vehicle fuel has risen sharply and there is a great need for increased production. A possible addition of vehicle gas can be produced by upgrading landfill gas which is formed by degradation of organic waste. This thesis investigates the potential of producing vehicle fuel from landfill gas in the region of Biogas Öst.In 2008, an amount of 32 million Nm3 landfill gas was extracted in the region. This level can be maintained for another ten years if the efficiency of gas extraction is improved. The annual production will decrease with time since landfills aren?t allowed to receive more organic waste.

Titel: Value stream mapping in practice ? A case study at Light MyFireAuthors: David Rydman and Tomas ÖnnemarMentor: Veronica Ülgen SvenssonExaminer: Åsa GustafssonBackground: Companies push their prices in today's markets to be competitive, which means that companies need to find ways to reduce costs while maintaining profits. (Cudney, 2009) According to Bergman and Klefsjö 2007, the basic rule of quality improvement says "there is always a way to achieve higher quality at a lower cost". One way is to improve a company's processes to get a more efficient flow and improvements that may cut costs. (Bergman & Klefsjö, 2007) Why it's important to look at the processes are that they often contain waste that can be eliminated.

Return handling is often regarded as a slow and complex process. Studies have shown that it is not unusual for a return to cost up to nine times as much as a standard outbound delivery. An efficient return handling process is therefore essential to all competitive companies dealing with logistics. This report investigates, analyzes and gives suggestions on development with the purpose to improve the return handling process at LensLogistics AB in Kista, north of Stockholm, Sweden. The study has been conducted from a deliberately practical point of view in order to suggest improvement suggestions possible to implement and thereby change the entire return handling process.

The environmental work in Sweden has developed a lot over the past fifty years. Today, most companies have some kind of environmental work. Environmental activities are regulated by the Environmental Code, which applies in parallel with other laws. This report is an environmental review for Bräcke Diakoni. The report aims to find out how much environmental impact Bräcke Diakoni has.

In the production of pulp, paper and cardboard, a large amount of water is used daily. The water has to be purified in the internal purifying plant before it reaches the receiving body of water. In the biological purifying stage at the Stora Enso Skoghall mill, an aerated basin is used where the microorganisms, using oxygen, oxidize the organic material to carbon dioxide. The air is pumped from the bottom of the basin and the oxygen can then be transported from the air bubbles to the water through diffusion. The problem with aeration of waste water from the forest industry is that wood residues, such as fatty acids, are making the transport of oxygen in water more difficult.

Important issues for the local authorities are what to do with the sludge produced insewagetreatment plants. The tax for landfill leads to higher costs with 250 SEK/ton. On the 31December 2004 it will be forbidden to landfill sludge.In Sweden the yearly production of sludge is 240 000 tons, counted as DS. The phosphorouscontent is 3 % in sludge. The total yearly production of sludge gives 6000 tons of phosphorous.

This thesis deals with the design of a combinated rescue-, personal-, and firefighting elevator for a nuclear waste storage facility to be constructed by the client SKB, Svensk Kärnbränslehantering AB. SKB:s mission is to dispose of all nuclear waste from all swedish nuclear power plants. The storage facility will be built in the rock 450 m under the surface and will consist of several kilometers of tunnel where capsules containing the nuclear waste will be placed. It will also hold a central area which contains spaces necessary for the operation and construction of the facility, such as elevator hall, storage hall etc. The facility will have two ways of access: a vehicle ramp and an elevator shaft.

Pharmaceuticals that are found in marine ecosystems are a threatening environmental concern, which is known to harm both animal and plant life. One of the reasons for this problem is that the waste water treatment techniques are not optimized to clear waste water from its pharmaceuticals contain. In this master thesis four Swedish treatment wetlands were studied, and their ability to reduce numerous pharmaceuticals in waste water. The four treatment wetlands that were studied were those in Oxelösund, Trosa, Nynäshamn and Eskilstuna. Two ecotoxicological tests and chemical analysis were used.

AB Sandvik Cormorant?s production unit in Gimo has identified a need to examinethe handling of products between operations with the purpose of generatingproposals of improvement for the product handling.The aim of this project is to study the existing manufacturing process and givesuggestions for improvement. The proposals should reduce the manual handling ofproducts, decrease the risk of damaging the products during the manufacturing andform a basis for increased traceability. Based on a mapping of the manufacturingprocess and the problem description, a specification of requirements has beencomposed.The mapping of the manufacturing process suggests that a change of the currentsystem is required. The company is recommended to decide how the producthandling between operations should be performed as guidelines for the productionteam.

Customer satisfaction is a key aspect for many corporations, among them Exacta Distributionscenter. To raise their customer satisfaction, we have researched ways to raise customer satisfaction through the implementation of an error-handling system and recommendations on how the organization should function in the future. This paper describes how these recommendations and the application has been developed, through help in existing theories. This results in a customer portal with the main purpose to provide help in handling orders with errors, and several routines recommended to Exacta Distributionscenter. .

This thesis presents an application that performs positioning of modules automatically based on given data for every module, and the development of it. The basis of the application is from a previous thesis code. On top of that code, more features and error handling has been added, as well as fixes for various bugs. A stress test has been performed and further development possibilities are being presented.The thesis work was carried out at Toyota Material Handling Mjölby (TMH) and was made in parallel with another thesis by Fredrik Holden who was generating data for the application. For a complete understanding of the theory and background, please also read Holden?s thesis report ?Development of method for automated positioning of 3D-representations of a modularized product?, as well as the former thesis  ?Analysis for Automated Positioning of 3D-representation of a Modularized product??..

The authors of this thesis have studied the handling of personal information in various kinds of organizations, because the perception is that the knowledge in this area is weak relative to the weight of the subject.The purpose of this paper has been partly to shed light on how knowledge of this area in the organizations that we have visited during the study but also to answer questions about handling, knowledge and security, and identification of individuals in different systems. What kind of problems the processing of these data creates and why these problems occur.In the beginning of our study we understood the importance of using the correct identifier and therefore chose also to examine what the various identifiers used by the organizations and why they chose these particular identifiers.In the qualitative analysis, Datainspektionen´s general rules and advice has been used as a basis together with the laws applicable to the organizations to get a good picture of how management of personal information is in these organizations.What we have found in this paper is that knowledge about how personal data is handled and what laws and rules are saying is very much dependent on how central the information is to these organization's activities. The police use so many different types of records for their organization to function well and they have very good knowledge of laws and regulations. In contrast, schools that do not handle as much of personal data themselves nor have the same knowledge among staff and do not have enough resources to cope with keeping the same knowledge base as the police. This is something that applies to all types of handling, depending on how important the information is for the organization, the better the security and knowledge in handling the data is..

Arbetets syfte är att få en bred kunskapsbas för att förstå vad koncentrationssvårigheter är och hur de kan se ut i klassrummet. Syftet med studien är även att söka förslag till handling för att stävja koncentrationssvårigheter. Det är en litteraturstudie av medicinsk och pedagogisk forskning kring koncentrations-svårigheter. Med hjälp av en fallstudie genom intervjuande samtal med en elev och skolans specialpedagog beskrivs verkligheten på just den här yrkesorienterade gymnasieskolan. Resultatens första del beskriver koncentrationssvårigheter till hjälp för förståelse av begreppet.

Customer satisfaction is a key aspect for many corporations, among them Exacta Distributionscenter. To raise their customer satisfaction, we have researched ways to raise customer satisfaction through the implementation of an error-handling system and recommendations on how the organization should function in the future. This paper describes how these recommendations and the application has been developed, through help in existing theories. This results in a customer portal with the main purpose to provide help in handling orders with errors, and several routines recommended to Exacta Distributionscenter. .