Denna rapport är resultatet av en studie kring kostnader för brandskydd av stålprofiler. Rapporten inleds med en beskrivning av problemet att hitta den ekonomiskt bästa lösningen för brandskydd av stålpelare i en konstruktion med specificerad brandklass. Därefter följer en allmän del om brandskydd och en övergripande redogörelse för gällande lagar och föreskrifter som har betydelse för brandskyddsdimensioneringen. De laster och förutsättningar som ligger till grund för valet av pelardimensioner beskrivs och valda dimensioner redovisas i tabell. Därefter följer en beskrivning av de brandskyddsmaterial som studerats: inklädnad med gips-, fibersilikat-, och stenullsskivor samt brandskyddsmålning.

AbstractBuilding Information Model/Modeling/Management (BIM) is a tool that allows for efficient working methods. BIM saves time and money while providing the potential for visualization. This method of working is based on a 3D-model, and then a fourth and fifth dimension are connected. 5D modeling means that a spreadsheet creates cost estimates based on the 3D model. This provides opportunities to carry out calculations in the early stages of the projects. Calculations are currently performed manually and do not contribute to the development that the construction industry requires.

To increase the quality in their products ABB is working towards a cleared order concept. That means that all customer specified options are to be known before they start with order calculations and construction. As it is today they use paper checklists to achieve this. One order may have several reactors, and for a reactor there can be several different alternatives. For each alternative a new checklist must be filled out.As of today all reading of the customer specification and checklist fill in with is done by hand by different persons, and sometimes the same data is read more than one time.

SyfteSyftet med detta arbete är att beskriva och analysera hur Company TEN bygger och kommunicerar sitt varumärke och hur de uppfattas av andra företag. Avsikten är att även beskriva och analysera hur företagets nätverksrelationer används och bidrar till varumärkesmarknadsföringen. Med detta syfte utvecklades även två forskningsfrågor:Hur kan ett litet bolag bygga upp ett starkt varumärke och image i musikbranschen?Hur sköter och nyttjar ett litet bolag nätverksrelationer gentemot andra företag för att bygga upp ett starkt varumärke i musikbranschen?  MetodDenna uppsats är av en kvalitativ fallstudieundersökning med något av en abduktiv karaktär. Fallstudieföretaget jag valt är Company TEN, ett mindre musikbolag som arbetar med 360-avtal.

The focus of this thesis is primarily in electronic construction and describes the design process for a microcontroller circuit board from concept development to prototyping. The client develops test fixtures for automated testing of products within the electronics industry and needs a new controller circuit for the test fixtures that can handle controls and basic testing. An investigation into the needs of such a system is conducted and a prototype printed circuit board assembly is manufactured.The prototype is developed with focus on protection against electrostatic discharges and overvoltage. Among the functions that are included are voltage measurements, communication interfaces and control of input and output currents. Firmware for the prototype is developed and configured to communicate with a PC through USB interface for control and collecting of measurements..

In the middle of Australia there is a city called Alice Springs. The city has one of the highest amounts of daily sunshine hours and sun irradiation in the world. The Australian Government runs a project called Solar Cities, and Alice Springs is one of the participators. The main part of the goal with the Solar Cities project is to increase the amount of electricity generated by solar power and by doing that lower the impact on the environment. This thesis examines the possibilities for construction of a large scale solar power plant in Alice Springs. This is done to determine the potential of creating a more sustainable energy system in the city.

The purpose of this study is to examine the physical space of children?s libraries in Sweden, and also to see which influences there are in the literature about the same subject. What ideas exist in the literature about the physical room of children?s libraries? We have studied how and if these influences can be seen in a selected number of children?s libraries. Our theoretical perspective is based on Anthony Gidden?s theory of construction.

The aim of this text is to compare the semantic profile of the Russian prefix B?- with that of the Swedish particle "ut". It follows Janda's categorization of Russian B?-verbs into semantic groups and compares Swedish phrasal verbs with the particle "ut" to the semantics of the Russian prefix B?-. The material consists of Russian B?-verbs and their Swedish translations retrieved from Norstedts ryska ordbok.

To build high-rise buildings made of timber has for long been limited by national laws, due to the lack of knowledge in engineering solutions. Frame structures made of wood has for a long time been associated with major fire hazards and consequently lower safety and this connection is still being made today. The increased environmental awareness in recent years has contributed to the exploitation of indigenous building materials, including wood from our own Swedish forests and has become increasingly common. Increased knowledge about how structures behave in fire and how they can be protected in order to achieve safe timber structures has resulted in a growing interest in these structures in the construction industry. Research in the area is constantly updated and new laws allow any number of storeys in wooden buildings in Sweden as long as the performance requirements are fulfilled.The main part of this work has involved calculations of the fire resistance and load bearing capacity of floor and wall constructions.

Soundclash is a phenomenon where groups within the culture of reggae music ?battle? against each other, through strategies including both music and rhetoric. The social interaction in the clash exemplifies the scene hierarchy, in which the participants aim to position themselves as number one. This study includes empirical material from a competition within the Swedish scene, also distributed digitally via Internet sites. The analysis is based on discursive psychology, focusing on rhetoric and the construction of meaning.

This study examines the in-game encyclopaedia Codex as it appears within the videogame Mass Effect. The purpose of this study is to analyse the Codex with emphasis on how the reading process is affected by the videogame medium. In this regard the study seeks to uncover what characterises the Codex as a fictional encyclopaedia, what it entails and how it interacts with the rest of the game. The theoretical basis of this study is derived from a combination of the writings of Wolfgang Iser concerning the process of reading, Jesper Juul's writings on the relationship between games and narratives, and the concept of intermediality as discussed by Hans Lund and Jørgen Bruhn.      This study is based on a close examination of the PC and Playstation 3 versions of the videogame Mass Effect, created by Bioware, with particular emphasis placed on the Codex. Mass Effect is a science fiction third-person shooter and RPG set in a future where mankind has begun interacting with aliens civilizations and colonising new planets.

The purpose of this thesis was to investigate the need of working instructions in Derome Träteknik ?s industrial house-building factories. Furthermore we wanted to determine an appropriate way for developing working instructions adapted to the conditions in a certain production environment. In the construction industry today prefabricated building elements are frequently used. With this come repetitive work tasks that need to be carefully planned.

Examensarbetet har utförts på Volvo Construction Equipment AB Component Division i Eskilstuna. Företaget tillverkar drilvlinekomponenter till bland annat hjullastare och ramstyrda dumpers. Företaget befinner sig i en expanderande fas med ökande volymer och på vissa håll har taket för bearbetningen nåtts. Kopplingsaxeltillverkningen är en flaskhals i företaget och behöver ses över för att möta de ökande volymerna. Uppgiften har bestått av att utforma en ny layout till bearbetningsgruppen för kopplingsaxlar.

Principles that guide how a classification system should be structured have existed for more than a century. Traditional classification principles can be of great value for the design of classification schemes directories on the web. However, there are differences between the library context in which these principles originated, and the web. This thesis aims at investigating how changes in the context of classification affect the application of traditional principles of classification on the web. Another purpose is to see what implications this has for the design of classification schemes on the web.

The purpose of this paper is to examine the law regarding gross violations of women and its application in the Swedish legal system. We have investigated how the legal system takes into account a holistic perspective of the vulnerable situation of women in the investigation and assessment and the extent to which psychological violence in the form of verbal abuse, threats and harassment attention. We also wanted to find out how the law's design may contribute to difficulties in the implementation and interpretation of it. In this study, we used a qualitative research approach when we decided to conduct an interview with a police officer and a textual analysis of four cases from the district court. Interview questions were semi-structured in order to gain a deeper understanding of the phenomenon.