ABB I-R Waterjet Systems combines the robotics and motion expertise of ABB Flexible Automation with high-pressure intensifier/pumping technology from Ingersoll-Rand to provide and continue to develop innovative waterjet cutting systems for global markets. The purpose of this assignment is to develop a process water purifier. The purifier should be applicable as an option to ABB I-R?s production cell Cutting-Box. At first hand the process water should be purified well enough to let out in the municipal sewage system, but the ultimate solution is purifying the process water to the range that recycling is possible.

Purpose: The purpose of the investigation is to give an insight to hot the EU legal environment in the field of vertical relationships influences the competitiveness of the 2nd tier of the automobile industry. Conclusion:It follows that European legislation has succeedded in raising the competitiveness by breaking down the powers of the predominantly more powerful companies that the 2nd tier players do business with and by giving companies sufficient leeway to act. The comment must be made here that serious problems due to a power misbalance might still exist yet are not uncovered. In the course of my research I have found a lack of issues in my subject field. These problems however would have a more structural and economical cause, dealing with these problems would fall outside the boundaries of the competence of European competition legislation.

Regulations on the exhaust emissions of HD-diesel engines are becoming more and more stringent, and therefore, emission after-treatment systems are commonly used. These systems rely on catalytic conversion of NOx,CO , and HC emissions, and are thus dependant on temperature. At low load of the engine, exhaust temperatures are not sufficient for the after-treatment components. Therefore, means to increase the exhaust temperature while maintaining low emissions and fuel consumption are needed.The focus of this project has been to develop strategies for the lift profiles of exhaust and intake valves in the engine, with the goal to raise exhaust temperature in combination with low emissions and fuel consumption. The strategies have been tested in a single-cylinder research engine equipped with a hydraulic variable valve actuation system.

ABB I-R Waterjet Systems combines the robotics and motion expertise of ABB Flexible Automation with high-pressure intensifier/pumping technology from Ingersoll-Rand to provide and continue to develop innovative waterjet cutting systems for global markets. The purpose of this assignment is to develop a process water purifier. The purifier should be applicable as an option to ABB I-R?s production cell Cutting-Box. At first hand the process water should be purified well enough to let out in the municipal sewage system, but the ultimate solution is purifying the process water to the range that recycling is possible. When investigating the different principle of purifying water, a research of different products and their manufactories was done. These different products were compared and the principle of filtration was the most applicable, as most of the products were designed for far larger applications. As the process water contains quite large amount of particles, it is necessary to perform the filtration in different steps. The process water purifier is therefore composed of a module of coarse filtration and one of micro filtration. In the module of coarse filtration the mainly amount of fibres and particles are eliminated. They are kept back in the container unit with the larger fragments and dumped with these when the container is emptied. In the module of micro filtration the filtration is performed in two steps. In the first step particles larger than 50?m are eliminated, in the second step the micro filter is setting the range of purifying, in this case 10?m.

Alfa Laval?s strategy is to focus on modularized product platforms. Several benefits areforeseen, reduced lead-time, less costs, shorter Time To Market and better quality.Development and verifying will be carried out on block level. Today the separators arebeing tested as a complete unit. A number of factors affect the test results and problemsthat are encountered can be hard to identify.

An increasing number of heat pump producers have developed heat pumps that can be connected to solar panels. In this thesis we have examined the possibilities of connecting solar panels to existing ground source- and geothermal heat pumps that has not been adapted to solar panels. During the work process, a prototype plant has been built to compare our theory with the practical results and with our designed sizing tool. The work has rendered in knowledge that will be used to build a sun module that can be easily connect to the existing heat pump system. The existing heat pump, our test plant, has been supplemented by an advanced storage tank used to allow different operating modes.

The project Easy Battery Handling - EBH has been carried out in our auspicial and completedfor Devantini Corporation, a development company in Halmstad with its main concern inenvironmental friendly innovations.EBH has solved one of many technical challenges in one of Devantini corporation?s largerprojects. This main project involves the development of an electric powered formula racingcar. The part of this car that involved EBH was the battery handling to guarantee safe andquick battery exchanges during pit-stops.The solution became an entire battery module, hanging on the side of the car on two spearspointing out from the car. The batteries are exchanged by a specially designed trolley that isinserted under the battery module.

ABSTRACTUniversity: Växjö University, school of social science, department of political scienceLevel: Bachelor?s thesis in political scienceTitle: SHIFTING BALANCE OF POWER? ? an analyze of the new EU-treaty?s consequences for the EC-court.Academic adviser: Associate professor Stefan HöjelidAuthor: Magnus NordahlThis study focuses on the increased role of the European Court of Justice through the establishment of a Constitution for Europe and its impact on the balance of power, both horizontal and vertical.To do this, the study takes its aims from the research problem, formulated as follows:Does the establishment of a constitution for Europe contribute to an increased role for the European Court of Justice and does it create a more legible horizontal and vertical division of power?To reach the relevant analyses and conclusions two precise questions are presented as well as an analytical model. The precise questions are:? Which are the relevant contributions for the balance of power from a perspective of juridification in the new EU-treaty?? What impacts do those contributions have on the so called ?European federalism??The theoretical perspective of this study is rooted in the concept of federalism with special emphasizes on constitution and sovereignty as well as a part about the process of juridification. Along with the presented analytical model consisting of a horizontal and vertical division of power, the empirical material is presented with focus on the new EU-treaty about a constitution for Europe and the European Court of Justice.

The vertical electronic excitation energies for the narrow-bandgap polymers LBPF, EP37 and EP62 have been calculated using Density Functional Theory (DFT). Also the vertical excitation energies for the acceptor unit of LBPF have been calculated using the Hartree-Fock (HF), DFT and Coupled Cluster (CC) methods. The calculations cover the visible and infrared wave length region and two strong transitions are obtained, one corresponding to the pi to pi* transition and one corresponding to the pi to Acceptor transition. The excitation energies obtained from DFT are below the corresponding experimental results and attempts have therefore been made to perform bench-marking calculations using a hierarchy of CC methods..

The aim of this master thesis is to study the integration in Sweden between forestry and bulky industries as fiber- and sawmilling companies. The analysis is based on theories about transaction cost economies and competitive strategy. The studied companies are active on the Swedish roundwood market. The buying actors on this market were divided into two groups; fiber- and sawmill industries. Three companies from each group were chosen subjectively by the author.

Most often when developing a new system there is a need get a functioning testtool up and running. Including time, cost and resources the solution isn?t always obvious, developing your own or buy one ?of the shelf?. The purpose of this thesis is to study how a general testtool for executing functional tests should be designed to be reusable, be based on recognized knowledge and be able to fast and simple be customized for different types of systems. Key functions from the litterature is presented and used in the design of a testtool prototype.

Detta examensarbete syftar till att implementera en modulgenerator som automatiskt genererar ett matchat differentialpar. Detta för att enkelt kunna generera detta vanlig förekommande byggblock utan att behöva rita om allt från grunden. Modulgeneratorn som konstruerats klarar att skapa upp till 2x2 transistor block matchad layout med eller utan sköld. Programmet skapar med hjälp av indata från konstruktören en skräddarsydd layout som kan användas som byggblock i integrerade kretsar. Examensarbetet är slutfört och har genomgått omfattande testning The aim of this thesis is to implement a module generator that automatically generates a matched differential pair.

I begin my essay with a story that illustrates how a preschool activity organized on a modular work can be perceived. I describe how the environment has been rebuilt and modified to accommodate one large group of children instead of two smaller groups as before. Management´s justification for the change is that it is carried out to give the children better conditions for their learning, but my understanding is that it also hampers preschool-teachers´ abilities to implement their assignment.I try to understand what benefits module work by examining what well-known researchers believe is important for children´s learning in environmental and preschool teacher´s importance. When I use what I have learned to analyze my story, my opinion is that the change of the preschool activity not have just a positive impact but also entails that preschool teachers find it difficult to be present and in interaction with the children as several well-known researchers notes is important for children´s learning. I discuss how a large and rich environment at the same time can be perceived as incalculable for teachers, which can result in not all of the children being paid attention to in the preschool activity.

Ericsson AB in Katrineholm is a part of the Section Business Unit Network in the Ericsson Group. The plant's main task is to produce printed circuit boards in small volumes with a high product mix and focus on delivery and cost effectiveness. At the factory they produce printed circuit boards in the Module department.The Module department has for a long time had a high output of non-approved circuit boards in their production. This has led to a growing stock of non-approved circuit boards on the company?s repair department.The purpose of this thesis is to investigate how Ericsson in Katrineholm can increase the outflow of approved articles in their test process in the Module department.

Statistics of occupational injuries show that bricklayers are among the most exposed, with heavy lifting by far the most common cause of long-term sick leave. Prefabricated brick beams create yet another risk of injuries that can be prevented by auxiliary equipment or alternative solutions. From articles, interviews with masons and from a survey carried out in conjunction with this report, it appears that there are frequently difficulties in the use of available means for lifting and handling. Previous studies on the subject of transverse reinforcement in masonry beams indicate a viable method for bridging large openings in masonry walls. This bachelor thesis delves into whether the idea could be realized in today's brick construction with a view to improving occupational health and safety.