The student project Elba at KTH started in 2011 and is a project where a battery driven prototype car is developed. The vehicle competes in Eco Shell Marathon in Rotterdam, Holland. In this competition the vehicle that travels a certain distance including several starts and stops with the lowest energy consumption wins. To minimize the consumption is therefore very important, which requires knowledge of the vehicles energy losses.A vehicle's energy losses depends on several factors and can be divided into the powertrain efficiency and the driving resistance. The driving resistance can then be divided in to rolling and air resistance, if smaller losses like vibrations are ignored.

The competitive nature of the automotive industry has always implied a necessity to improve product development concerning time-to-market, cost and product quality. As capacity of computer-aided engineering (CAE) tools has evolved, so has the strive for simulation-driven design. Virtual durability testing using full vehicle models is one of many challenges posed in front of vehicle manufacturers when computer simulations are given a key role in product development.This thesis has been initiated as a preliminary step towards implementing dynamic virtual durability testing in the development of buses and coaches at Scania. The objective has been to assess the predictability of a full vehicle coach model and to what level of precision structural loads can be predicted. Previously performed proving ground testing of a Scania Touring coach has been the basis for the modelling and simulations in this thesis.A virtual model of the Scania Touring coach has been created in multi-body simulation software package MSC.Adams.

AbstractDelta Terminal owns an outdated industrial building which they now rent out to businesses. This property currently has a high energy con-sumption and therfore it is desirable to improve the efficiency. In ordet to reduce the energy consumption within the industrial building enve-lope, the heating systems and lighting are being investegated. A good building envelope emits less heat and thus reduces the energy consump-tion. An energy audit is a tool used to determine the energy loss.

Denna examensrapport redogör för hur man kan få en kortslutningsskyddadoch säker inkoppling av en DC-länk mellan två skiljda elektriska system.Rapporten bygger på hur en lastbil ska kunna få en större säkerhet för attbibehålla sina elektriska bromsar om tex ett av bromssystemen tappar sinordinarie matning.Lastbilens bromssystem består idag av två skiljda elektriska system med ett 24volts strömförsörjande batteri vardera. Det ingår två stycken elektriskabromsar i varje system. Om det tex blir fel på en av bromsarna och dennapåverkar ett av systemen vill man kunna koppla bort denna enskilda bromsmed sitt system. Man vill även kunna försörja den fungerande bromsen somsitter i samma system via en så kallad Axle Link. Denna strömmatningslänksitter mellan två hjulpar på samma axel.I denna studie undersöktes möjligheten att realisera en kortslutningsskyddadoch säker DC-överföring via en Axle Link, i första hand med diskretakomponenter.

The flow of information in road vehicles intensifies as new techniques develop. Informationsources such as cell phones, navigation equipment and radios demand the driver?s attentionwhile he or she must stay focused on the road to perform a safe driving. Today the visualinformation inside the vehicle is mostly located on the dashboard, which forces the driver tolook down when shifting attention between the environment outside and the informationinside the vehicle. One way to avoid this is to useHead-up Display (HUD), a technique thatprojects information in the visual field of the user.This master thesis has been performed in cooperation with Scania CV AB, a world leadingtruck producer.

Energy efficiency is important both to reduce costs and to reduce greenhouse gas in the atmosphere. In Sweden 40 percent of the energy consumption is related to the buildings sector. Hospitals are complex buildings with different activities in the same building, which requires flexible technical systems for ventilation, heating and lightning. A quarter of the total energy consumption in Swedish hospitals is related to user activities in the hospitals. Therefore it is not only important to work with operational optimization but also to change user activities, to reduce energy consumption.The objective of this thesis was to examine the user-related energy efficiency work at two care units, at the central hospital in Sundsvall within Västernorrlands County.

AbstractIn order to investigate whether people living in Linköping city feel that the built environment affects their exercise habits, a quantitative cross-sectional study with qualitative elements was conducted. A questionnaire was the chosen approach in which information about exercise habits, education level, built environment was requested. The selected group was people working at Skatteverket in Linköping where many people work and where age, gender and education level varies. The built environment does affect the exercise habits, where major proportions choose to exercise in areas considered inviting. The majority of the respondents had a tertiary education, and many lived in the city of Linköping.

The comprehensive purpose of this Master of Science thesis is to examine which fleetmanagement services for engineering vehicles, ?Fleetech? preferablyought to develop inorder to reach a broad market and meet the demands of contractors.Scanty explained, fleet management is the management of a company's vehicle fleet and theservices can include a range of functions such as driver management and fuel management. Inshort the thesis encompasses four sections:1.Survey of the general contractor industry: The survey has been preformed toevaluate the potential size of the market for fleet management services in the generalcontractor industry.2.Needs analysis: The needs analysis aim was to define what contractors tasks andgoals are, and to determine what functions they want and need from a system.3.The use of CAN and the technical premises: The prerequisite for developing asophisticated and generic system is that vehicle data can be accessed from the CANbuss.The use of CAN standards in construction equipment has therefore beenexamined.4.Specification: An explicit set of requirements have been set to be satisfied by a fuelmanagement service, based on CAN standard protocol J1939.Important conclusions: The use of CAN protocol standards are extensive and the prerequisitesfor developing elementary and CAN based services good. The services should be compatiblewith different manufacture?smachines.

Today when new and harder demands on CO2 emissions are developed, vehicle manufacturers must work to develop new engine solutions to new kinds of fuels to replace fossil fuels. A fuel that could be applied is hydrogen. When hydrogen is combusted only water vapor occurs. Hydrogen is known to be explosive and flammable. These properties are both good and bad for combustion.

Today the competition in the automobile industry is getting all tougher. The technology behind cars becomes more advanced. To get ahead of competitors car companies has to look into new areas of innovation.One important area is vehicle safety. Bigger companies have come so far in vehicle safety that difference between cars more depends on the car type (size) than the technology behind it.There is one area where vehicle safety that still has great opportunities for improvement, which is in active safety. The term active safety states that the car has the ability to identify treats and automatically respond to the treats.

This report relate a concept study that consider a number of different proposals to improve the overcharging system in BAE Systems Ha?gglunds tracked vehicle series BvS10, to maintain sealevel power at extreme altitude.At high altitude the power losses beacuase of the air density that decreases, which results in less fuel can be burned. The decreasing of air density also gives rise to fatigue failure of the turbocharger unless power is reduced.The proposals shall be as required by BAE Systems Ha?gglunds economically sustainable and defensible from a packing perspective. That means the selected solution must have a reasonable price tag and at the same time a minimal impact on adjacent components.The basis for this thesis is based on benchmarking of both the auto industry as the flight industry, to find inspiration and tips for improvement.Some of the concepts have after gathering facts and calculations been excluded while other solutions has been considered as workable and thus interesting for BAE Systems Ha?gglunds.Initially the current turbochargingsystem was analyzed in order to determine the starting point and thus be able to fix the current problems surrounding high altitude driving.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.