The purpose with this bachelor thesis is to identify risks and insufficiencies concerning the production at WilloMaskin AB. The project is limited to only 4 machines, where theories as ?OEE? (overall equipment efficacy) should be illuminated and analyzed. The theory of ?Single Minute Exchange of Die? is also presented.The method used in this project is mostly based on qualitative studies but also quantitative studies are presented.

Earlier studies of musculoskeletal problems with milkers working in milking parlour operators have shown that it is a physically demanding occupation. The extremities that are most exposed are neck, shoulders, hands and wrists. Those systems that have been studied in present cases are fishbone and some tandem barns. There have been changes in the working environment during the past ten years. The mechanisation has been developed for the better with automatically removers of the milking units and vertically adjustable floors in almost every daily milking barn. In other hand the milk production are more industrialised and more related to stress today.

Approximately 20% of the milk within the udder of a cow is stored in the cistern and immediately available for milk removal, while activation of the milk ejection reflex is required for removing the remaining milk stored in the alveolar compartment. The aim of this literature review is to describe, evaluate and consider implications of the three different suckling activities that the calf displays during a suckling bout. In terms of milking, these phases are represented by pre-stimulation, stimulation during milking and post-stimulation. Pre-stimulation is commonly performed in order to induce the milk ejection reflex, whereby the hormone oxytocin is released and the alveoli in the secretory tissue are contracted. Time requirements regarding pre-stimulation must be considered in relation to lactation stage and milking interval.

I have chosen to work with drag hose system and try to find an alternative to spread manure with a usually tank system, see if you can make a profit and what advantage and disadvantage the system has. The purpose whith the project has been to try to make a system that can spread manure at better occasions than farmers do today and above everything make a financial addition. Today it is just a heavy work and takes a lot of time. I have counted on investment costs and carefully examined what equipment you need. I have not the technical details in my project, I have just tried to understand how it is to spread manure with drag hose system today. What is drag hose system? You put a hose in your manuretank, connect it to a pump that is driven by a traktor or stationary engine. You place a hose that reach the field were you are going to spread.

Wavecraft AB develops medical equipment for heating of organic synthesises. The heating is done with microwaves, which improves the process in both speed and accuracy compared to the more traditional methods where heating elements are used. This report discusses the developement of an automatic lid mechanism for one of Wavecraft's product prototypes. The company assumes that the final product will be integrated by customers into fully automated systems, and the upgrade from a manually to an automatically controlled lid is therefore an important step in the product's developement process.The first stage och the project was an idea generation process. The ideas generated here were organized into five different concepts of which the best one was selected through the use of a concept matrix.

Denna rapport i form av examensarbete för utbildningsprogrammet Managing Technology and Business Projects, är en del i Volvos framtida produktions-/ produktstrategier.Uppsatsens syfte är att ur ett produktionsperspektiv understödja Volvo Construction Equipment i Braås i strävan mot en ökad modulindelning av ramstyrda dumprar, som en del i utvecklingsarbetet för en effektivare produktion. Resultat har uppnåtts genom analys av intern och extern benchmarking jämfört med den teori som finns inom ämnesområdet modulindelning. Huvudresultatet visar att teorin och verkligheten skiljer sig genom att modulindelning ska anpassas individuellt utifrån varje företag och inte fungerar som en generellt applicerbar process. Slutsatsen visar att Volvo CE i Braås måste utveckla en egen handlingsplan och kravspecifikation utifrån egna definitioner som är skräddarsydda specifikt för företaget.I rapporten presenteras förslag till ovanstående handlingsplan för modulindelning på Volvo CE i Braås..

Many companies do not register all the stops that occur in a production plant, it often takes longer to report than to fix the problem. If no problems are registered, you cannot trace where the problems arise.This master thesis was performed at AcobiaFLUX and they have noticed an increased demand from their customers to trace problems raised in their processes. The aim of the thesis was to find out how a tool to monitor a process best could be developed. Then the most essential from the theoretical base was developed into a useful tool for operators. For the operators to know if the process utilizes the full capacity of a process, the tool presents a measure of the Overall Equipment Efficiency, OEE.

I studien testades 35 psykoterapeutstudenter för att undersöka sambandet mellan empati och förmågan att känna igen mikrouttryck. Empati mättes med självskattningsformuläret Interpersonal Reactivity Index vars subskalor mätte följande aspekter av empati: perspektivtagande, fantasi, empatisk omsorg samt personlig oro. Förmåga att känna igen mikrouttryck testades med Micro Expression Training Tool. Resultatet visade ett signifikant positivt samband mellan empati och förmåga att känna igen mikrouttryck. Signifikant positivt samband fanns även mellan subskalan perspektivtagande och förmåga att känna igen mikrouttryck, medan subskalorna fantasi, empatisk omsorg samt personlig oro inte korrelerade med förmåga att känna igen mikrouttryck.

Kompetensutveckling av personalen och internutbildningar har varit ett hett debattämne de senaste åren. Numera är Internet/intranät och interaktiva självstudiekurser ofta ett alternativ till traditionell lärarledd utbildning. Vi ville därför undersöka hur lärande via intranät sker, hur sådana internutbildningar upplevs av deltagarna och att försöka ge förslag på hur dessa kan utvecklas ytterligare. För att uppfylla våra syften har vi valt att utföra studier hos tre av Volvos återförsäljare. Volvo har sedan en tid tillbaka en internutbildning som kombinerar lärarledda lektioner med självstudiekurser via intranät.

Detta examensarbete är resultatet av en utredning av tvättning och rengöring av produkter som tillverkas på Volvo Construction Equipment Components AB i Eskilstuna. Arbetet är uppdelat på två huvudområden, tvättning i processen samt slutgiltig renhet. Skillnaderna mellan dessa är framförallt att det finns fastställda krav på den slutgiltiga renheten för artiklarna men en motsvarande märkning saknas för de olika tillverkningsstegen. Idag tvättas ungefär 70% av TMAs artiklar i en central tvättstation. I och med detta uppstår en hel del problem med ledtider och kvalitet.

Vådabekämpningar är inget nytt fenomen när det kommer till militära operationer. För att kunna lösa detta problem så måste man ta reda på vilka de största orsakerna till vådabekämpning är samt vilka lösningar det finns för att minska risken. I denna uppsats har det genomförts kvalitativa litteraturstudier om fenomenet vådabekämpning, från Operation Desert Storm och framåt. Syftet med uppsatsen är att studera hur arbetet med att förhindra vådabekämpningar skulle kunna se ut, samt ta reda på vilka de största anledningarna är till att vådabekämpningar uppstår. Analysen visar att det finns en rad olika orsaker till att vådabekämpningar uppstår. Vidare så visas ett antal åtgärder som kan vidtas för att minska risken för vådabekämpningar. Resultatet visar på att det går att reducerar riskerna, men att fenomenet aldrig helt kan försvinna..

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

HIV/AIDS is a chronic disease that has increased and will continue to increase. Most health care workers will one way or another come into contact with it. The purpose of this literature review was to describe factors contributing to nurses' attitudes towards patients with HIV/AIDS. Sixteen articles were analyzed and quality assessed. The results revealed gaps in knowledge among nurses.