Control and comparison of various cleaning methods on restaurants in Södra RoslagenThe purpose of this report is to find out and analyze the efficiency of cleaning methods in restaurant kitchens. The investigation was carried out through unannounced inspections at 89 restaurants in Södra Roslagen (municipality of Danderyd, Täby and Vaxholm). ATP-measuring was done on a plate, a knife, a bench surface and a cutting board. The ATP-method measured the amount of food residue on equipment and working surfaces after cleaning, with a luminometer and swabs. Restaurant staffs were asked to describe in detail how and when the last cleaning was carried out on the surface.

Color management has become more common now than ever in the graphic trade. Calibration andcharcterization are words that are mentioned very often when it comes to controlling colors andwhen you want a printed picture to look the same as an original photograph. The problem is thatthere are not so many people that has the knowlegde about this subject. Even if a printer supportscolor management it is not sure that the result is going to be satisfied and that a printed picture isgoing to look the same as the original.The printers which were used were Hp DeskJet 970 Cxi, Xerox Docu Color 12 and AgfaChromapress 50i. The theory of color, colour management and the equipment which were usedare described in the first stage.

The aim of the study is to investigate how teachers in grades 1­­­­­­­­­­­?3 use reading aloud to develop the pupils? reading comprehension and how they reflect on the method. The study is based on interviews with four teachers, all of them working in these grades. The interviews have been interpreted hermeneutically and the statements compiled in accordance with the aim and research questions. The results indicate that all the teachers are aware that reading aloud can be used as a resource to develop pupils? reading comprehension.

The change in course recently taken by the Swedish Armed Forces results in an increased use of equipment, and thereby increased requirements of preventive maintenance. This paper aims to examine the current responsibilities for preventive maintenance in an army unit. The intended effect of this examination is to disclose possible flaws, and to help make routines for preventive maintenance more effective.The questions asked in this paper are;Who, in an army unit, is responsible for the routine maintenance?When is this responsibility valid?What demands does the technical service have on responsibilities for the routine maintenance?How are these demands met?How ought to be responsible for the routine maintenance?To answer these questions the author has chosen to use a descriptive method to show the current facts. A theorizing method is chosen to, from described facts, clarify the demands of the technical service on routine maintenance.

The purpose of this paper is to explore how practicing teachers have included their education in their teaching profession. The five teachers who were interviewed expressed that they lack experience in dealing with administrative issues, conflict management, parental contact and how to manage stress. There has been prior research on how teachers perceive their everyday working lives. Those results showed that teachers are becoming stressed by not knowing how to handle certain situations.My results showed that the teachers were to busy so they created their own methods on how to deal with phenomena that the education have not treated or discussed. The interviews were analyzed with the help of two constructivist concept, authenticity and activity .Authenticity focuses on knowledge is created and constructed by everyday situations.

The purpose of this paper is to examine how teachers choose to work with the teaching of reading and writing skills, how teachers justify their choice of teaching method and how the documentation of student development is being used. This paper also discusses the definition of reading and writing, phonological awareness and how different reading- and writing educational methods can be combined. The gathering of information has been done through a literature review in which I have looked at past research on reading and writing. I have also conducted qualitative interviews with teachers involved in literacy learning. The result of my research shows that it is not possible to determine which literacy learning methods that are most effective.

The aim of this thesis is to describe the customer?s attitudes toward the contracting for availability, i.e., which factors are from the customer?s perspective necessary for the fulfilment of a supplier-customer agreement? Furthermore, the objective is to describe and analyse a supplier-customer relation in the Defence Industrial sphere.The present study has been carried out as a case study using an abductive approach. The thesis is based on a practical problem, i.e. which factors will be important to the customer when a contractor in the Defence Industry wants to increase its commitment of service, and how will their relationship change? The thesis is above all focused on generating knowledge that can lead to rapid and concrete measures and that can be used in the analysis of an increased industrial commitment but also as a case study of a problem of a more general nature in the Defence Industry.

A number of studies in human medicine has documented positive effects of whole body vibration treatment in humans. The Vitafloor system, witch is based on treatment of horses with vibration, has the purpose to be used in training of healthy horses and as rehabilitation for horses with injuries in their musculosceletal system. The purpose of this study was to analyse what happens with a clinically healthy horse during treatment with Vitafloor. The methods used is mainly thermography before and after treatment, but also blood samples, measurement of rectal temperature, heart rate, clinical examination and observation of psychic reactions has been done. Statistic significant changes in skin temperature in hoofs and fetlocks of front legs has been observed after treatment with Vitafloor. Analyzing of the blood samples showed a tendency for decrease in Kalium, and two of the horses had changes in CK. No negative effect has been observed with the treatment of horses with Vitafloor, and the horses seems to like the treatment. .

Specialundervisning och nivågruppering i matematik har inte så stor effekt (Bentley & Bentley, 2011; Giota & Emanuelsson, 2011) och vår skollag (2010:800) gör gällande att undervisningen ska ske inom klassens ram. Med detta som utgångspunkt designades denna studie. Studien genomfördes med 21 elever i år två under nitton lektioner. Syftet var att se om intensivundervisning med hjälp av strukturerad undervisning kan ge effekt på elevernas automatisering av additions och subtraktionstabellerna inom talområde 0-20. Studien genomfördes som en experimentell design med fältexperiment och metoderna i studien var deltagande observation, fältanteckningar och diagnoser.

The aim of this thesis is to investigate if an automation of the manual packaging process at Legosan AB is profitable. Legosan AB, located in Kumla, performs subcontract work of dietary supplements and medical products to companies within Europe. The chapterportal robot is used in the other. As there are several options in the choice of packaging robot the suggestions of improvement are divided into two different designs. Other machines and equipment necessary for the different suggestions of improvement are showed and their measurements are presented.

Today digital guides are most frequently used by the museum and tourism industries. They are also used for education purposes. They make it possible to distribute information and have it easily accessible. In addition to written information they add sound, pictures and videos which lift the whole impression of the visited place to a higher level. A variety of systems currently in use today have been evaluated.

With an IT outsourcing project there are many factors affecting how efficiency andquality develop in the outsourced activity. The Purpose of this study is to identifythese factors through a case study in a global company that is dissatisfied with theefficiency and quality of their outsourced helpdesk. For data collection methodsinterviews and observations were used. Interviews were conducted with people fromdifferent parts of the company in three different countries, all somehow involved inthe outsourced system. The observations were made with the outsourced company tosee how the employees work and fill information gaps that the interviews could notcover.

The purpose of my study is to explore which possibilities there are for movement activities and how to use those possibilities. From this study, I will help the pedagogues recognize how to work more or different with movement activities.I have used participant observations and interviews as methods for my study. I did this at one preschool, because it is a development-study. The observations lasted for two weeks and the interviews were made with the majority of the pedagogues at the preschool.  The results of my study showed that the preschool teachers think that movement activities are an important part of children?s lives.

This report describes a Bachelor thesis work in which a robotised laser welding cell has been modelled and simulated for the purpose of making a presentation movie. The report shows that the work has been concentrated on making the movie from the modelling phase through the recording of the movie and ending up with the editing of the final presentation movie. A pre-study was made prior the Bachelor thesis work. In the pre-study a literature study was conducted about measurement and calibration of a welding cell. Measurement of almost all equipment in the entire cell was also conducted in the pre-study.

The role of the quality manager has evolved from being a quality controller to work with a more global business. Within many organizations in Sweden, however, the traditional role of the quality manager's remains and the tasks categorized as quality control still takes up most of the quality manager's time. The survey conducted as part of this master thesis shows that the quality manager in most businesses has multiple roles in addition to the role of quality manager, which can create a role conflict. One consequence of this is that each improvement is not given priority due to time constraints. Although the importance of a clear and committed leadership is the key for succeeding as the quality manager.