Abstract This degree project examines how much carbon dioxide that emits during the construction phase of a road project. This is to make it possible to compare how the amount of carbon dioxide differentiates between traditional road construction and Swepave construction, which is PEAB?s alternative way to design roads. To make the comparison a calculation tool has been produced. To compare the amount of carbon dioxide emissions a reference project was needed.

This thesis has been performed at International Aluminum Casting AB in Eskilstuna,Sweden.International Aluminum Casting is currently working with a number of improvementsin their production in order to achieve their vision of being the leading aluminum foundry in Sweden. As a step in their improvement efforts, focus was directed ondeveloping the company's fixtures for machining.Efforts were focused on two main objectives: to develop a complete proposal on afixture which leads to a more rational use of an assigned part and also form general design advice for development of fixtures in the future.During the work progress, discussions have been made with experts at International Aluminum Casting within the field of fixture design. The objective was to obtain sufficient knowledge about the underlying problems with the current fixture for the part. At this stage of the thesis, a number of essential criteria for fixture design were produced. Information and inspiration were obtained by examining the company?s currently developed fixtures.After gathering the necessary information the process of developing three different fixture concepts started.

Valmets own foundry in Karlstad has during a long period of time had problems being profitable. The goal today is to turn this around. Today there are three different productionlines; engine blocks, Yankeecylinders and components for the wind turbine industry. This master thesis has focused on examining if value stream mapping is a useful tool to use in a foundry, and therefore outside the typical manufacturing industry. The target has also been to evaluate if there is a possibility to improve the flow in the foundry and also the results.During the 20 weeks this work has been done at the foundry data has been collected and analyzed.

Fuel pellets are a refined bio fuel mostly consisting of residues from sawmills and wood industry. At Rindi Västerdala AB's combined bio energy plant in Vansbro fuel pellets are produced, while the waste heat from the process is used for district heating. The pellets are produced from sawdust, wood shavings and dry wood chips that is dried, milled and pressed into small cylindrical rods. The advantage of refining the wood material in this manner is that the energy value is greater per unit volume and unit weight, thereby the cost of transportation per energy unit is reduced. Also, less storage space is needed.Pellet manufacturing is a complex process since many parameters affects the final results.

Marketing is a broad subject with many different areas. Part of the marketing that has been of great importance is the 4P:s also known as the marketing mix. Marketing mix is included in one of the traditional marketing approaches. In recent years there have been some changes and have begun looking at new ways of looking at marketing. One of the ways is entrepreneurial marketing to the effect that the company tries to use its resources optimally.

The aim of this bachelor?s thesis is to gain deeper knowledge about how librarians in public libraries in Sweden view theirprofessional role with regard to the last decades of change in the library field. Especially concerning the technical evolution and towards a higher user orientation and market mindset, and in which ways this has influenced the librarians everyday working tasks. A particular focus has been placed towards the reference transaction, the use of computers and e-media, and the stock development. We believe that there currently is a changeover, from the libraries traditional line of function, towards them as more of service institutions.The method used in this study for answering the research questions and to gather empirical information is semi-structuredinterviews.

The Internet provides the common user with a variety of both traditional and non-traditional news sources, and a vast range of possibilities to contribute to the flow of information. By their participation in the production of information ordinary citizens can sometimes function as non-traditional news sources them selves and reach a potentially unlimited audience. The interactive nature of the Internet blurs the line between producers and consumers, and challenges traditional definitions of what counts as "news" as well as who qualifies as a "journalist". The main purpose of this thesis is to examine the potential consequences of this decentralization regarding the information behaviour of newspaper journalists and their perception of their professional role. The study consists of qualitative interviews with six journalists, employed by four of the leading Swedish newspapers, and a review of earlier research in the field.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

Young children get affected and influenced by people?s thoughts and preconceived ideas about the difference between boys and girls. How they should behave and how they are supposed to play and interact with different toys.In the goals for what the school and teachers will achieve it says in the curriculum for preschool that teachers are supposed to counteract the traditional gender roles.To get answers to the question at issue, I collected 48 individual plans of development and I have performed four observations. I put all facts together and compared the results.The main result in this study shows that the traditional gender roles are being reflected in the children?s plans of development.

The aim of this Master?s thesis is to examine the profession of librarianship by studying tasks in Swedish public libraries. The method is a textual analysis of articles inspired by the critical discourse analysis of Norman Fairclough. The theory applied consists of the profession theory of Andrew Abbott and the gender theory of Yvonne Hirdman. The questions raised are: how do librarians speak about their tasks, which discourses can be constructed and how can profession theory and gender theory explain the result.

Analysts at Venture Capital firms of today experience troubles when they try to explicate the intrinsic value, which they see in their investments. The traditional valuation models do not account the value of flexibility and analysts have to Through studies at a Venture Capital firm in Sweden, I have analyzed if Real Option analysis could help them to explicate the intrinsic value that they see.With the help from a decision tree, analysts can identify the hidden option values embedded in the investment. I find that real options can be a helpful tool for Venture Capital companiesto clarify the intrinsic values that they see in their investments. Real option analysis is however not a competitor to traditional value methods, it is rather a compliment..

The purpose of this paper is to survey the textile based proto-industrialism in Sweden in the middle of the 19th century. This case study is founded upon Anders Hansson?s pre-industrial textile production at the estate of Mölneby, Östra Frölunda in the rural district of Kind in the province of Västra Götaland.Account books from the year 1853 related to Anders Hansson?s wool fabric manufacturing have been looked into and categorized using a quantitative research method. The research has also been supplemented with a number of interviews.The result of the survey shows that Anders Hansson?s business activities fit into Mendel?s theory of proto-industrialists at a practice level.By collaborating with a merchant in Gothenburg the fabrics were traded in unknown markets, as well as in more familiar neighbouring districts.

This study has the purpose of looking at the current and future position of record labels from a context involving the technological developments, while the opportunities for the artists are changing. As the actors inside them music industry find themselves in an ever changing climate where traditional supply chains are threatened by new technology, the record labels need to change the way they work in order to maintain their existence in the music industry. The study has been conducted by interviewing a number of people involved in the music industry, by using a qualitative method approach. The conclusion of the study shows that the traditional way of doing business by treating music as a product that makes revenue is gone. Instead the labels have to take on new roles formerly run by third parties in order to survive and be profitable, especially since artists can now in control of activities that used to be controlled by the record label..

This study has the purpose of looking at the current and future position of record labels from a context involving the technological developments, while the opportunities for the artists are changing. As the actors inside them music industry find themselves in an ever changing climate where traditional supply chains are threatened by new technology, the record labels need to change the way they work in order to maintain their existence in the music industry. The study has been conducted by interviewing a number of people involved in the music industry, by using a qualitative method approach. The conclusion of the study shows that the traditional way of doing business by treating music as a product that makes revenue is gone. Instead the labels have to take on new roles formerly run by third parties in order to survive and be profitable, especially since artists can now in control of activities that used to be controlled by the record label..

This study has the purpose of looking at the current and future position of record labels from a context involving the technological developments, while the opportunities for the artists are changing. As the actors inside them music industry find themselves in an ever changing climate where traditional supply chains are threatened by new technology, the record labels need to change the way they work in order to maintain their existence in the music industry. The study has been conducted by interviewing a number of people involved in the music industry, by using a qualitative method approach. The conclusion of the study shows that the traditional way of doing business by treating music as a product that makes revenue is gone. Instead the labels have to take on new roles formerly run by third parties in order to survive and be profitable, especially since artists can now in control of activities that used to be controlled by the record label..