Free2Move AB is developing products for the market within wireless communicationand identification, among those active RFID-tags. The company had an idea aboutproviding one of their active RFID tags with a GPS receiver and transmit positions viaan existing RFID protocol. Desire from the company was also the possibility to logpositions and measure temperature. The finished prototype should also be able to beactivated by movement. The company had proposal about components that were to beused in the project.

In industry applications, such as power supply plants, the issue of interaction between fluid and structure is always presented. More precisely, the fluid flow affects the structure by applying force(s) on it and vice versa. As a result, the structure can move (vibrate) or deform. A good understanding of this problem can help to design the system in term of safety, stability and efficiency.This project aims to optimize and test the Unicorn FSI solver from the FEniCS project [1] to simulate the interaction of fluid and structure in an experiment, which was carried out at Vattenfall Research and Development. The target is to improve the Unicorn FSI solver to cope with a real industrial problem.

Quadrotor UAVs are self-stabilizing, autonomous flying machines that has recently become more popular than ever. Unmanned Aerial Vehicles have their roots in the military, where they were developed for use in reconnaissance and combat. During the last few years, advances in the fields of electronic sensors, electric motors and microcontrollers have enabled smaller designs and autonomic flight control even for private use. The quadrotor, which is the particular kind of UAV we are looking closer at in this paper, has 4 rotors in an X-like formation. This configuration has many advantages such as good lift capacity, non-complex mechanical structure and serviceability.In this project we aquired a current overview of the domain and determine whether it is possible to construct a quadrotor UAV designed for use in a WISENET sensor network on a low budget and short time schedule.Based on existing community project AeroQuad, a quadrotor is constructed with a budget of about 500 euro.

This project was intended to develop and improve my skills as an artist/designer. I have used inspirational sources and followedmy artist?s intuition to create something that is individual and a reflection of myself.My goal was to design 7-10 compositions and apply them to t-shirts and then create a photo arrangement with these t-shirts to make a strong artistic presentation.I chose to apply my images to t-shirts, because I feel that the tshirt is a perfect median to display pieces of art. My process has been very non-linear in nature. Trial and error,experimentation and my gut feeling have strongly influenced the progression of my design process and guided me to new ideas.I feel that with this project I have succeeded in fulfilling my goals to develop and improve my skills as an artist/designer..

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The project ?Investment proposal for grinding station for service work of screw feeders? has been performed during the spring semester 2014 for the course Bachelor?s thesis for degree of  Bachelor of science in machine engineering at Karlstad?s University. The project has been performed in cooperation with Fiber Workshop which is a service department in the company Valmet AB. Valmet AB is a company that develops and manufacture soft paper tissue machines. The screw feeder is a part that is used to feed, and squeeze out the water out of woodchips.

In the wake of the electronic revolution digital library has become one of the central themes concerning libraries. The present study takes up the question whether digital library can function in the same way as the conventional library. The question can obviously be posed from different perspectives, e.g. technological-, the user-, or the organizational perspective. The study investigates if (and how) digital library can have the same functions as the traditional library.

The purpose with this essay was to study and analyze how gender roles is represented in six different mathematic books for children in the third and fourth grade and to see if the books counteract or reinforces traditional gender roles. It was also to see if the mathematic books follow the goals in the curriculum. I had four questions that I focused on while analyzing the mathematic books:What kind of activities does girls and boys like in the exercises in the mathematic books?What does girls and boys own in the exercises in the mathematic books?What does the relationships look like between different persons in the mathematic books?Based on the results from questions 1-3, do these six mathematic books try to follow the curriculum?The results of this study shows that girls often can be interested in things that usually is seen as either girlish or boyish, while boys mostly is interested in things that is seen as boyish. I got almost the same results when it comes to the second question, girls can buy things that is often seen as either girlish or boyish, while boys mostly buy things that is seen as boyish.

This paper is based on a quantitative survey. The study aims to answer the questionwhich media young people rather use to take part of the news. The results showthat young people today in Kalmar preferably and often read newspapers on theInternet and mobile phone.The questions asked was about which media they usually use, the level ofconfidence they had in various media, how interest was in different newscategories, willingness to pay for online news and background issues relatedsubjects. The survey was aimed at high school students in Kalmar and weredistributed and collected on-site at the schools. What was remarkable among theresponses was that young people largely had access to a morning newspaper athome and said that they would consider subscribing to one in the future.

The report describes the thesis I, Philip Bergstrom, have done at the University of Gotland. The work comprises 15 credits and is at bachelor level and has been done in collaboration with Lyktan Bankeryd Belysning.The project consists of developing the design of a kitchen lamp for the Swedish home following the catchwords stripped French bistro that will fit into the Lyktan Bankeryd lighting spring collection 2013, and it should not look too alike any existing lamp on the market today.The work includes analysis of the company's current products and the image the company wants to project, analysis of three other companies' products to draw inspiration from, and a simple ergonomic study of the lights in the kitchen.The final result achieves the demands made and fits well in the intended environment, there is also the possibility for further development of both a floor lamp and a wall lamp..

This report deals with an exam report written by Olle Hjalmarsson and Thomas Likar, students at Högskolan i Halmstad. The project was carried out for Haldex Traction AB in Landskrona whose business consist of manufacturing automatic all wheel drive systems (AWD-system). These systems consist of a plate clutch which activates all four wheels of a 4-wheel driven vehicle. An important component in these clutches is the accumulator which basically consists of a piston under the load of a spring which creates an oil pressure with the help of an electric motor used for actuating the clutch.At Haldex difficulties has been experienced regarding the assembly of the accumulator parts due to the small tolerances between the piston and the hole of the accumulator in the cast aluminium housing. Attempts have been made to assemble the parts in existing robot cells.

The purpose with this project was to invent a product that secures buildings sewersystems against rats. The problem was presented to us by a local building maintainer inHalmstad, who had experienced big problems with rats in his real estate. The project hasbeen carried out by Per Johansson, Robert Lidén and Niclas Nilsson under our ownauspices. We are primarily sponsored by AMLI Business Partner but also byInnvationsgruppen, Halmstad Fastighets AB and Anticimex.To be able to secure a whole building with only one product we came to the conclusionthat the product must be placed in the horizontal sewer pipe that connects with themunicipal sewer system. Our goal was to invent a product that prevent rats from passingand at the same time not affect the water flow.

The main purpose of this study is to investigate and understand how technology students handle information especially when they are working with their Masters thesis. A further purpose is to examine how technology students use library resources of the Linköping University. The research method used is grounded theory, where description of the method is an integral part of the study. Twelve qualitative interviews were made with newly qualified graduates from the engineering programs of Linköping Institute of Technology. The respondents were divided into two groups, A and B, with six in each group.

There is a new beverage container on the market, a bottle made out of pure aluminum as a replacement for the traditional container made out of glass. This new container has the potential to reduce both cost and pollution during transportation, the lighter and stronger construction has every advantage compared to the old one in glass. The new container has every possibility to make it on the market. Some of the biggest brands within the soft drink market already use these bottles in countries without any recycling demands like: Coca-Cola, Heineken and Pepsi. The only thing stopping these brands from the Swedish market is the lack of a functional return system, there is only one company that uses the bottle in Sweden today and they take care of their own used bottles.

The earmould acoustics affect the amplification that the hearing aid is programmed to give to its user. It is therefore important that the choices made for the earmould are correctly done. One choice is regarding the shape of the soundbore that affects the frequency response of the hearing aid above a certain cut-off frequency. The purpose of this project was to measure the frequency response when altering the shape of the soundbore in the earmould. Additionally, the aim was to examine how the frequency response is affected when the shape of the soundbore is not set or is not possible to set in the software when programming the hearing aid.