Sökresultat:
4897 Uppsatser om Traditional project - Sida 64 av 327
Aktiv ventilstyrning
To achieve an optimal combustion, an even air/fuel ratio in the combustion chamber is required. An optimal combustion leads to reduced amount of emissions due to a more complete combustion, which is an important matter because of the sharpened environmental laws. This can be attained, among other things, by applying entirely variable cam times. To optimize the engines efficiency and its emissions at all workloads and speeds, an active valve control can be applied. This means that the intake and exhaust-valves can be opened and closed at any time, independent of the crankshaft position.
Användarinvolvering i ett systemutvecklingsprojekt -Är det effektivt?
In most software engineering project, users are only involved in the beginning
of the project as a help to design the requirements specification but users can
be involved after this phase too, but is it effective to do so?
With this report we would like to investigate how effective it is to involve
users after the requirements specification has been written and approved.
To find out how effective it is to involve the users we try some fast and
simple involvement techniques on a quite far gone project. These techniques
include ethnographic studies, prototypes and surveys. We also interviewed a
couple of people who work with usability and finally delivered a report with
our results to them to find out if they found our result relevant. By also
documenting how much time we spent involving users we will show to which degree
user involvement is effective.
We found out that a couple of fast techniques could get very much result in the
form of usability enhancing suggestions to the developers.
Fogar i prefabricerade betongelement
This report describes a project, which was carried out as a final thesis covering 30 ECTS during the final semester of the Master of Science programme Industrial Design. The assignment was issued by Fagerhults Belysning AB in Habo. The assignment was to design a family of products in which LED was to be used as a source of light. The main focus in the initial part of the project was to find a way to design the inside of armature which was suitable for LED technology. An armature, already in the range of products at Fagerhult, with the desired qualities that was to be strived after was the Zintra. The lighting source of the Zintra is a compact fluorescent lamp.
Bokjuryn. Barnbibliotekariers syn på och arbete med det nationellt läsfrämjande projektet
The aim with this thesis is to examine how childrens librarians apprehend and use the nationally initiated reading project Bokjuryn as an instrument in their work. The main question is as follows: How does Bokjuryn work related to the way public libraries pass on literature? Two questions are asked: How does the childrens librarians use Bokjuryn as an instrument and how do they motivate their work with it? and How do the childrens librarians view the reading project Bokjuryn as a method of passing on literature? The study is based on qualitative interviews with five childrens librarians. As a theoretical starting-point Jofrid Karner Smidt´s work about mediation of literature has been used. A model has been created and used based on Louise Limbergs analyses of the differences between school libraries and public libraries to analyse the result of the interviews together with other literature.
Managementkonsultens roll i projekt : En studie av utvärderingsprocessen
A consultant is an external expert that exists within all types of organizations. The consulting service can be divided into individual practitioners and large companies whose sole task is to hire out consultants to clients. The need for consultants has grown due to the restructuring of Swedish businesses during the past decades. They have put parts of their business on contract. This has led to a market with other player that have been able to focus on these parts.
Är etiska aktiefonder lika lönsamma som traditionella aktiefonder? : En studie som jämför riskjusterad avkastning mellan svenska etiska aktiefonder och traditionella aktiefonder
Background: There has been an increase in savings and investment in recent years along with an increased interest in responsible investments. Ethical mutual funds has developed and gained increasingly popularity.Aim: The aim of the study is to examine if ethical mutual funds are an equivalent alternative to traditional mutual funds in terms of return, risk and risk-adjusted return on the Swedish stock market.Theory: Beta, Jensen's Alpha, Sharpe ratio, Treynor ratio, and Modern Portfolio Theory.Method: Quantitative survey method, a statistical study.Conclusion:The study concludes that there is no significant difference between ethical and conventional mutual funds in terms of return, risk and risk-adjusted return. The small differences that exist between the two fund groups are in favor of the ethical fund group, indicating that funds is a comparable investment option compared to traditional mutual funds..
Att sudda bort skillnaden mellan arbete och nöje : Om ämnesinteggrerad undervisning i praktiken i grundskolan
Regarding school-teaching most people have had the traditional idea that the teacher is the owner of all knowledge and the student is the receiver of that knowledge. Tradition tells us that the way the student receives the knowledge has been by listening, repeating, reading and memorizing what the teacher has taught. Research about teaching from the last decades show that there are other strategies, ways, and qualitys for helping students in learning. One of those ways is by integration of different school subjects.According to research every human being creates her own knowledge based on personal experiences. Johan Krantz and Pelle Persson (2001) wrote that learning is a process with experiences, ideas and opinions.
Materiallogistik vid innerstadsprojekt : En fallstudie av ett innerstadsprojekt i förbättringssyfte av materialflödet
The construction industry is always looking for ways to make the work more efficient aswell as minimize the waste of money in general. At the same time the industry is showing alow awareness of logistics which has to increase in order to improve the industry in thesekind of questions. Projects located in the inner city have high demands on the logistic andthe handling of material due to the so often limited space for storages of the material. Dueto this the purpose of this report is true a case, study and analyze what kind of factors thereis to take into consideration during the materials way from the supplier to the workstationin a project located in the inner city. The data for the report was collected with the help of acase study, and in three different ways.
Akustiskt åtgärdsprojekt av en rockmusikklubb där live-musik spelas. Vad kan en audionom bidra med?
Introduction: The number of hearing impairments in Sweden is increasing. The largest increase is seen in ages 25-44. There are reasons to believe that these impairments are noise induced. Leisure time noise is not controlled in the same manner that industrial noise is. An ongoing conflict between city council officials and rock club owners, musicians and music event organizers about sound levels at smaller live music clubs exceeding the national sound level restrictions created the need for an acoustic intervention project.
Underhållskoncept : tillståndsbaserat underhåll på smörj- och hydrauloljesystem
AbstractThis report describes our ten week long thesis work which is the last task in our education in mechanical engineering at Linköpings University. The project has been performed at Siemens Industrial Turbomachinery AB?s service department. The company which is located in Finspång produces, sells and provides service for steam and gas turbines around the world.The purpose of this project is to help Siemens develop their maintenance programs for two of the auxiliary systems which are a part of the complete steam turbine system. These are lube and control oil systems.The project is restricted to two of Siemens maintenance products, No Stop Check (NSC) and the annual Safety Inspection (SI).
Konstruktion av snabbkoppling för elektropolering.
Lansen Technology develops and sells alarm systems. The communication between the system devices are wireless. The radio protocol used by the system is developed by Lansen with the purpose to be energy efficient. The alarm systems target groups are individuals, businesses and government agencies. The current system is installed, configured and controlled from a control panel for all audiences.
Uppfödares syn på inridningshästar i grupphållning : enkätundersökning
The horses? natural behaviour is easier to satisfy in a loose-housing system than housed in a traditional box. Law?s and science suggest that we should house horses in loose-housing, which improve the horse possibility to perform natural behaviours, to interact socially with other horses and to have more possibility to movement. It?s more timesaving in a working population aspect and a economic gain in materials.
We noticed that it?s different opinions about what people in the horse society thinks about having youngsters housed in a loose-housing system.
Carbon offset management : worth considering when investing for reforestation CDM
The idea for this project was initiated together with one of the leaders in the forest, paper and packaging industry. To get through an A/R CDM process the company is exposed to the risk of failing the process or that the overall costs will exceed the benefits of the project. This would delete the incentives to invest in GHG removals compared to purchasing emission allowances on the carbon market. The questions that have been raised and needs clarification in the thesis are the following:? From a company perspective, what are the incentives for implementing Forest Clean Development Mechanism (CDM) projects?? What is a likely financial outcome of a reforestation CDM project on degraded land in the Guangxi province of the Peoples Republic of China?? When does an investment like this break even with the cost of buying market based carbon emission allowances? The objective of this master thesis is to carry out a research about the incentives for forest, paper and packaging companies to invest in reforestation through the clean development mechanism.
Kritikens kris: En diskursanalys av begreppet kritiskt tänkande inom förskollärarutbildningen
The following study is a discourse analysis of the concept of critical thinking within pre-school teacher education. It considers the following questions: how does the concept of critical thinking appear in policy documents, central to the pre-school teacher education, and which possible conceptions of critical thinking are conveyed by students and teachers active within the education. Additionally, the study seeks to discuss, as well as suggest a possible relation, between the findings of those two questions.
In reviewing the material (consisting of five semi-structured interviews with students and teachers, and of a selection of policy documents central to the education), I argue the existence of a sort of project within the education, which presents critical thinking as a higher value. At the same time, I argue that the concept is not defined or concretized. This project, however, as I suggest while drawing upon Foucault?s ideas of discourse and government, involves a rather high degree of control.
Utvecklandet av en portabel solcellsmodul i miniformat lämpad för Nordiska klimatförhållanden : Teoretiska, praktiska och beräkningsmässiga analyser
The construction industry is always looking for ways to make the work more efficient aswell as minimize the waste of money in general. At the same time the industry is showing alow awareness of logistics which has to increase in order to improve the industry in thesekind of questions. Projects located in the inner city have high demands on the logistic andthe handling of material due to the so often limited space for storages of the material. Dueto this the purpose of this report is true a case, study and analyze what kind of factors thereis to take into consideration during the materials way from the supplier to the workstationin a project located in the inner city. The data for the report was collected with the help of acase study, and in three different ways.