In Sweden plans to build high speed railways have been around since the early 1990s and the planshave developed to be more precised since. The future Swedish high-speed rail network is supposedto consist of two lines. Götalandsbanan; from Stockholm to Gothenburg, and Europabanan fromJönköping through the Öresund Region to Hamburg.The description of the aim to build high-speed railways in Sweden has in former reports always beento achieve rapid passenger traffic between big Scandinavian cities and Europe. There are almostnothing mentioned about the possibilities of high-speed transports of cargo on these railways. Thisstudy aims to clarify the freight transport market for Götalandsbanan and Europabanan.Today there is only one transport system with high-speed freight trains.

The aim with this study was to investigate the effects a change of manufacturing process would have on the mechanical properties of drill bits made of a WC/Co composite used for stone cutting. The method used today is sintering, where the material is heated in a conventional sintering oven. The other method was microwave sintering, where the material is heated by radiation in the microwave region. Also an investigation of the manufacturing cost were made.The main difference between the two heating methods is that the conventional way is a rather slow process and the microwave method is very fast. The material is also heated homogeniously in the method with mirowaves, aposed to the case with the conventional sintering where the material is heated from the outside in.This makes the material harder and more wear resistent.

The public sector in Sweden outsources its core business to a very large extent, whileinsisting on running its IT operations internally in a traditional way. IT as a service ingeneral and cloud computing in particular has become incredibly popular in recentyears, offering cost efficiency and greater ability for the business to concentrate on itscore activities, which is why it should be a promising alternative to the traditional wayof running IT internally. To achieve an understanding of why IT as a service has yetto take off in the public sector, a study of its use of IT/IS, what the effect of IT as aservice is, and the opportunities and challenges that cloud computing represents, isnecessary.The study, which was conducted using a qualitative hermeneutic approach, was initiatedby a literature review, followed by six in-depth interviews with five respondents,all of which hold many years of experience in the area. The outcome of the interviewsindicated that IT as a service should represent a promising and feasible way of reachinghigher levels of cost control, and a greater focus on core activities. Furthermore,the results indicated that Swedish legislation along with a high level of businesscomplexitymight be reasons for the low amount of IT as a service in the public sector.Through careful analysis and examination of the business? current situation, as well ascomprehensive knowledge of Swedish legislation with regards to the implications ofLagen om offentlig upphandling, the public sector can avoid IT as a service becomingmore expensive and more complicated than necessary, and achieve cost efficiencyalong with a greater focus on its core activities through it.Future research could examine the possibility of a framework for the integration ofcloud services within the public sector?s IT/IS environment, and whether there is aspecific size of a cloud implementation at which it?s more cost efficient to go withtraditional IT operations..

In June 2006 the Swedish government decided that the use of energy in buildings should be reduced by 20 percent until 2020, compared to the level of energy used in 1995. To contribute to this goal, the real estate company ?Eskilstuna Kommunfastigheter AB?, set up own goals for their buildings. In 2009, the goal for schools was to have a maximum energy use of 118 kWh/m2year for heating and hot water.The school ?Hållsta skola?, just south of Eskilstuna, exceeds the limit since it used 270 kWh in 2008.

This Master?s Thesis aims to investigate and assess the methods used to decrease the discharge ofmetals, primarily copper, from the water purification plant at Assa Industries plating factory inEskilstuna.Literature studies of the purification methods precipitation, ion exchange, evaporation, reverseosmosis and electrolysis has been done to appraise the adequacy of the technique. Thesetechniques are commonly used for purification of industrial waste water.Assa has four plating lines: the Trumline, the big Zinkline, the new Zinkline and the Decorativeline. The new Zinkline is the most modern of the four lines and purification is done byrecirculation over an ion exchange unit. The demand for fresh water is thereby heavily reduced.The Trumline, the big Zinkline and the Decorative line all use older techniques.

This thesis analyses the prerequisites, profitability and competitiveness of eucalyptus plantation on the Iberian Peninsula and in Brazil. The thesis has a macro perspective and analyses a typical hectare of eucalyptus in each studied region. A survey methodology was used as a strategy to cover a broad perspective using expert respondents. The regions studied on the Iberian Peninsula were the ones found suitable for eucalyptus plantations from an economic point of view. The studied regions were Huelva in the South West of Spain, Galicia in the North West of Spain and Portugal.

AbstractThe dependency of fossil fuels in the transport sector causes large emissions of carbondioxide. This problem can we reduce by using vehicle gas from digested solid manure and leftover of pasture. I have studied the potential for this in the county of Västernorrland. Thepurpose is to investigate how much vehicle gas that can be extracted.One central, large scale digestion and upgrade plant should be placed in Härnösand. Theamount of pasture and manure that is economical and practical available is enough to produce2,7-3,5 millions Nm3 vehicle gas.

The purpose with this work is to investigate the cost to produce piglet in a case study company. The starting point is going to be the agriwise (www.agriwise.org) calculation which I am going to change and adapt to the case study company. To day the pig market is bad but we have probably reached the bottom. The market has started to rise. It is no business to produce piglets today.

The use of fossil fuels such as coal and gas are a contributor to the global warming. The climate change is a worldwide problem with far reaching consequences that is believed to be very expensive. The United Nations has been introducing a framework convention on climate change. One component of the convention is the Kyoto protocol. The protocol is obligating the developed countries to decrease their emissions of greenhouse gases by 5.2 percent during the time period 2008-2012.

Förvärvsarbetande kvinnors obetalda arbete och huvudansvar för hem och barn resulterar generellt i en högre total arbetsbelastning jämfört med män. I föreliggande studie användes etablerade självskattningsinstrument för att undersöka hur självskattad stress är relaterad till total arbetsbelastning och om stress och arbetsbelastning varierar i storstad respektive tätort. Totalt deltog 114 sammanboende yrkesarbetande småbarnsmammor med minst ett barn under 12 år. Resultatet indikerar ett samband mellan småbarnsmammors stressbelastning och ansvar för hem och barn oavsett bostadsort, dock är det särskilt markant i tätorter. Den totala arbetsbelastningen var hög, särskilt det obetalda arbetet, men tycktes inte vara relaterad till upplevd stress.

Several technical solutions are ready to step forward as the new generation of propellant, and this report aims to explore the possibility of commercializing fuel cell cars. The report is based on current research and data from today's technology and engineering solutions that are estimated to be commercially realized before 2020.A mapping of today?s different fuel cell options has shown that the most suitable fuel cell option is the Proton Exchange Membrane Fuel Cell, which uses hydrogen as fuel. The report is focusing on a techno-economic well-to-wheel analysis of hydrogen and the energy balance and costs in a system perspective. The basis for this analysis consists of two centralized methods of production, steam methane reforming (SMR), and alkaline water electrolysis.

The purpose of this essay is to investigate if the companies listed on Nasdaq/OMX Stockholm Large Cap use the earnings management phenomenon Big Bath Accounting to a greater extent when a change of management (CEO) is made.Management tends to use earnings management when there is a bonus plan linked to the result of the company. To gain maximum bonus the management will try to manipulate the result in a way that in a long term maximize their utility. Through the earnings management technique Big Bath the management is given the possibility to take one large cost as a one-time expend, even though the cost is supposed to run over several financial years. This, of course, within the legal framework. A big bath may occur when there is an impairment of goodwill, tangible and/or intangible assets or larger provisions for future expense, or both of them at the same time..

Den snabba tillväxten av organiserad brottslighet under de senaste tio åren ger en bra möjlighet att undersöka dess inverkan på brottsförekomst ? ett relativt outforskat område i Sverige. Denna studie syftar till att undersöka hur kommuners brottsfrekvens påverkas av förekomsten av kriminella MC-gäng. En panel med kommundata för åren 1996?2003 ligger till grund för den modell, med kommun- och tidsspecifika effekter, som används för att undersöka effekterna av kriminella MC-gäng på ett antal brottskategorier.

Return handling is often regarded as a slow and complex process. Studies have shown that it is not unusual for a return to cost up to nine times as much as a standard outbound delivery. An efficient return handling process is therefore essential to all competitive companies dealing with logistics. This report investigates, analyzes and gives suggestions on development with the purpose to improve the return handling process at LensLogistics AB in Kista, north of Stockholm, Sweden. The study has been conducted from a deliberately practical point of view in order to suggest improvement suggestions possible to implement and thereby change the entire return handling process.

Sweden has distinct seasons with cold winter and temperatures down to minus 25 ?C andpleasant summers with temperatures above 20 ?C. During spring and autumn there could becomechallenges with precipitation. The diverse climate in Sweden affects many homeowners. For thepeople living in leisure boats and permanent housing boats the seasonal changes are clearlyimpacting their economy and the indoor climate.