This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

Inspections within the building industry are surrounded by a rigorous set of rules presented in AB 04 and ABT 94. There are several types of inspections but the final inspection has the biggest legal implications and is important in many aspects, since it?s the one that ends the contract time for the contract i.e. when the contract is passed on from contractor to the client. It is also a confirmation on how the contract has been carried out and that the potential guarantee times after the contract will start to apply. The objective of the following report is to find out what different types of inspections there are as well as a legal understanding about what happens before, during and above all after the final inspection.

This report is the result of a case study at Peltor AB during the spring semester of 2007. The task Peltor gave us was to improve the delivery accuracy and to lower the high finical value of delayed orders (backorder), and to divide the products into logical groups. The logical group will be a useful tool to remain a high level of service. If the level of service increases the company will be more competitive.The electronic department at Peltor has problems with delayed orders. According to Peltor, the problem is based on delivery lead time which is presumed.To increase the delivery accuracy, a lead time analysis is made to find the accumulated delivery lead times for each product.

This report will detail the participator view of partnering in Kvarteret Frodeparken. Kvarteret Frodeparken is a new construction project being jointly delivered by Skanska Sverige AB and Uppsalahem AB. The report will focus on the comparison between the participators view of partnering with an emphasis on common partnering goals. The report will also focus on the economical benefits, the time benefits and the social environment benefits you can find in partnering.The principals of partnering are; participants together make the common goals for the projects, make ice breaking activities to improve stakeholder engagement and working with an open economy to find the profitable choice for the project. With a combination of the three principals the team together decide the best solution for the project.

The main purpose of this report is a first step to cover the scarcely investigated subject of interspecific competition between roe deer, Capreolus capreolus, and fallow deer, Dama dama. The report focuses on the distance between individuals of roe and fallow in the study area as well as which factors that is affecting the variation in distance depending on fallow deer group size and changing population density over time and in two areas. For additional information the history of the populations, such as harvest and distribution, is also investigated. The report came to the conclusion that interspecific competition between the species do occur. The elevated distance between individuals of the two species is clearly significant. The most important factor affecting the distance seemed to be the size of the fallow groups.

Sustainability reporting in Sweden is a voluntary disclosure action for non-governmental companies. Since 2009 all state-owned companies must however publish a sustainability report according to GRI guidelines and with independent assurance statement. Three different sustainability reporting methods are primarily used: (1) Separate Sustainability Report, (2) Sustainability Report included in the Directors? Report, and (3) Sustainability Report forming part of the Printed Annual Report. The aim of this paper is to explore why some companies choose to publish a sustainability report and identify the motivational factors behind this decision, as well as attain an understanding for companies? choice of reporting method.

If P&C Insurance Company faces a challenge when their treasury system needs a new interface to a software as a service application. They need a suggestion for configuration for how the system and the application can work together. The work presented in this report is a suggestion for how you can make business configuration of an IT-based Treasury System in general. The exact configuration for the case received from If is presented as a separate report, found in Appendix A and is called the If-report. The If-report presents the suggested technical set-up of the configuration.

The Internet protocol of today has been used for over 20 years. A new version of the protocol has been developed to replace the old one. This is a direct result due to the explosive growth of the usage of the Internet. This follows by new demands which needs new solutions. This report brings up the old protocol IPv4, the new protocol IPv6 and shows what kind of changes that has been developed to meet the users demand.The report brings up two important aspects; internet security and mobility.

The result of this master thesis report describes the advantages and the drawbacks that will arise when implementing an Ethernet based intercommunication system in military vehicles. The report presents a possible solution and describes how different sound applications will be implemented into the suggested solution. The report show that IP LAN in vehicles leads to more advantages than drawbacks. The main advantages are that all kind of media can share the same LAN and that there is a lot of knowledge of this technique in the civil area. The main drawback is about delay.

For systems with multicore processors contention for shared resources is a problem that occurs when several memory-intensive processes are executed in parallel within the same memory domain. This contention has a direct influence on the performance of the system and is a complex problem that has been recognized for a long time. An attractive and actively studied way to minimize this problem is by using a process scheduler adapted to allocate processor cores in a way such that contention for shared resources is minimized.With the introduction of multicore NUMA-systems (Non-Uniform Memory Access) the situation has become even more complex. In these systems the access time for processor cores to different memory domains vary depending on factors such as distance and load. Thus, the process scheduler also has to consider where the memory of each process is placed to minimize the distance and balance the load on each memory domain.This report presents a user-level process scheduler for a NUMA-system based on the multicore processor Tilera TILEPro64.

This report will present athesis on behalf of Eleiko Sports AB and carried out by two students at the InnovationEngineering (University of Halmstad). In this report the project participants willdescribe the project background along with the current product issues andneeds. A clear structure for participants, stakeholders and information flowbetween these parts will be included in this report so that you can clearly seethe areas of responsibility. The report includes a timetable which the grouphas worked along and also methods used. In the development process you will beable to read about how the students in an interdisciplinary way have used themethods and come up with an entirely new product.

Companies and organizations need to take care of their employees? creative ability. This report gives some examples of work situations that support or prevent creativity. The purpose with this report is to investigate the link between people at work and creativity.It was necessary to delimitate the area and decide which sources to be investigated and presented in the report. The main topic is on sources of creativity, but as more organizations seem to introduce efficiency thinking according to Börnfelt (2009), the interaction between efficiency and creativity is also presented.In this report theory is compared to industrial designers? opinions on creativity.

This study looks into the possibility, and profitability, of expanding a pilot project that has been put into action at GGP Sweden AB in Tranås, a manufacturing company that produces front mowers. The pilot project is meant to give GGP Sweden AB a more precise control of the flow of goods from their suppliers, and its essence has proven to be quite similar to the Japanese Just-in-Time philosophy.The study has been divided into four separate areas; mapping, supplier selection, supplier evaluation and cost analysis. These areas represent a holistic perspective on the expansion of the pilot project and cover topics varying from methods of finding suitable JIT-suppliers, constructing Key Performance Indicators (KPI) to reviewing costs and assessing profitabilities.In this report, the reader will initially take part in the works of mapping GGP?s manufacturing unit, pilot project and supplier base, which results in a list containing the most suitable suppliers for a Just-in-Time based collaboration. Afterwards, the reader will be led into the area of supplier evaluation, where five KPI?s are created with the purpose of ensuring that GGP will be able to evaluate their suppliers and pilot project in an effective way.

ADHD has for a long time been perceived as something that affects children and grows away with time. American psychiatric association state that ADHD may appear differently with adolescences and adults than with children. That could lead to misunderstandings and exclusion by adults and adolescences with ADHD at work life amongst other situations. This report investigates that exclusion and tries to find what information that needs to reach certain target groups to prevent it from happen.The works focus is text design, a part of information design, and looks firstly at the factors that make good information material. Then I investigate if there is a need for more information about ADHD within working life and if so what it would contain.

I contacted the production company Salmonfox in the hope that they would have any projects that they needed help with. It showed that Salmonfox just started up an old project that they needed to complete. They wanted my help to edit some trailers and one crowdfundingfilm for the short film called, Captain Sweden (Kapten Sverige). Salmonfox are hopefully going to use the different trailers and crowdfundingfilm to promote the short film and get help with the funding to make a feature. The project began with a pilot study in which I made a time plan and a requirements plan, where the different requirements were set.