This is a report that describes the entire process of design of a measuring station for rolling resistance. The report is structured with elements of Fredy Olsson's method.The report also includes a brief presentation of HGF, the company that will manufacture the machine. Requirements and preferences are set up and used in a weighting of criteria by which product suggestions are based. These suggestions are used in the evaluation to produce a final draft product. Solutions to major functions are produced by criteria?s. Component selection for all components is performed, a CAD-based model is developed and an economic analysis is set up. FMEA analysis is set up. The report ends with a brief summary, critical review and suggestions for further work..

According to the national legislation concerning discrimination within labour law, it is prohibited to discriminate on the grounds of sex, ethnic belonging, religion or other religious belief, functional disability, sexual nature and part-time work or time-limited employment. The EC-law goes further and also prohibits discrimination on the ground of age. According to an EC-directive the member states must incorporate a national provision against age discrimination by the 2nd of December 2006 and the Swedish legislator is now in the progress to implement this into Swedish law.Even though national legislation does not contain any provision on the area, the EC-law directive has a certain influence at national law. Measures that are in breach of the purpose of the directive can for example not be taken. When the time for implementation has expired, the directive has direct effect and can be referred to within the member states.

This report is about the shear force design of reinforced concrete according to Europe?s common dimension rules, Eurocode. The purpose is to describe the calculation procedure and the background to the formulas and expressions that occurs. Furthermore results from different calculation methods (hand calculations and computer calculations) will be compared to see how they differ.The goal with this is to go through the parts of Eurocode dealing with shear force and that this will lead to a clear review of these. You should also be able to see how results and the calculation procedure differ between different calculation methods.

        This is a report that describes the entire process of design of a measuring station for rolling resistance. The report is structured with elements of Fredy Olsson's method.The report also includes a brief presentation of HGF, the company that will manufacture the machine. Requirements and preferences are set up and used in a weighting of criteria by which product suggestions are based. These suggestions are used in the evaluation to produce a final draft product. Solutions to major functions are produced by criteria?s. Component selection for all components is performed, a CAD-based model is developed and an economic analysis is set up. FMEA analysis is set up. The report ends with a brief summary, critical review and suggestions for further work..

This student report is about neutering male and female cats and compares early ageneutering to neutering at the traditional age of 6 months.The main focus in this report is early age neutering, which means that neutering isperformed when the kittens are between 6 and 16 weeks of age. This technique has beenused by shelters in the United States for a long time, to prevent the adopted cats fromreproduce and contribute to the problem of overpopulation.Two different surgical methods are also addressed; the ventral midline incision and thelateral flank approach. Ovariohysterectomy and ovariectomy are also compared.I also address which drugs are preferable when kittens are neutered and some importantguidelines where you have to be extra careful when dealing with kittens.These guidelines are the preanesthetic evaluation, calculating drug dosages and preventinghypothermia, hypoglycaemia and stress.The report also has a summary of the concerns regarding early age neutering such asanaesthetic risks, growth disorders and growth plate fractures, urologic diseases andimmune system dysfunction, obesity, altered metabolism and behavioural changes.The sex hormones and how they change after neutering is also included.At the end of the report there is a compilation of a questionnaire that consists of eightquestions that I sent out to various animal hospitals and veterinary clinics in Sweden..

We came across the discussion about the so-called duty to report (14 kap 1 § SoL) and we found some previous research, showing that preschool teachers are hesitant to report, and that they want real evidence that children are being mistreated, even though the duty to report clearly states that they have to report as soon as they suspect that a child is being mistreated. Our purpose became to study what tendencies and conditions preschool teachers and principals, placed in the municipalities of Hässleholm and Kristianstad, have to fulfil their duty to report according to the social services act, when there is a well founded suspicion that a child is being mistreated.  We split the purpose into the following research questions:   Do local guidelines about how preschool teachers should act when suspecting that a child is being mistreated exist, and are they being followed? To what degree does the staff has knowledge about these guidelines? How do preschool teachers experience the treatment from colleagues, principals and social welfare officers when they´ve done or wanted to do a report? How do preschool teachers experience the reactions of a report from custodians? We did conversational interviews with two principals, one from the municipality of Hässleholm, and one from the municipality of Kristianstad. We also made focusgroup interviews with the staff, three persons each from one of their respective preschools. Our conclusion is that preschool teachers are unwilling to report mistreatment.

This report is about the shear force design of reinforced concrete according to Europe?s common dimension rules, Eurocode. The purpose is to describe the calculation procedure and the background to the formulas and expressions that occurs. Furthermore results from different calculation methods (hand calculations and computer calculations) will be compared to see how they differ.The goal with this is to go through the parts of Eurocode dealing with shear force and that this will lead to a clear review of these. You should also be able to see how results and the calculation procedure differ between different calculation methods.

This report describes a master thesis performed at Saab in Arboga. The main purpose was to build a controller for a system containing a turn table and an antenna beam. The idea is to use this system on a boat where it will be exposed to position disturbances due to waves. The desired behaviour is that antennas placed on the antenna beam should point towards the same target all the time. To solve this problem the system has been modeled and simulated in Matlab and Simulink.

Sparse matrices are often used in numerical algorithms that solve linear equation systems. Many methods for storing sparse matrices have been proposed and implemented during the years. These methods focus primarily on minimizing the total memory consumption and the time that it takes to store a sparse matrix. This report researches the available storage methods for sparse unstructured matrices. The formats that are researched and implemented are COO, CRS and ELL.

We were assigned to do this master thesis by Husqvarna AB who at the time for this thesis just had implemented a new material and production planning system called Replenishment system. Husqvarna AB wanted us to examine the effects of their new planning system to see if it was profitable or not. Husqvarna AB had for a time considered their delivery and supplier service to bee their biggest problem and they wanted to solve this problem by improving the communication with all involved actors in the logistic chain, which they hoped would result in a better mix of products in their warehouses. The aim of this report was therefor to analyze eventual effects for Husqvarna AB when changing from a traditional material- and production planing system to a more information intensive one. The result of this report showed effects on decreasing administrational routines and improved flexibility and lead-times.

The report describes the process of identifying the interference that exists in a newly installed automated robotic cell and suggest improvements to increase productivity. The cell is used for lifting up extruded aluminum sections onto a conveyor which deliver the material to a anodising line at a company that manufactures aluminum extrusions.To find the areas with the best possibility for improvements in the cell we used a variety of job measurements e.g. measure of standard times for each operation in the cell. The core of the report is a study of the robots.One reason for this study is that the robots do not reach the productivity they were purchased to. The main cause not reaching the productivity is the visionsystem.

The aim of this report is to give a description of a diploma work of 20 points that has been performed during the spring 2006 at Ericsson AB in Borås. The report accounts for the problem and procedure during the diploma work. The software used for this project was embedded in a radio link. The RAM in this radio link was divided into several regions where two were used for memory allocation. The current allocation of memory in the radio link was not optimized with regards to performance, security and memory use and the configuration used made it difficult to determine the memory use of the system and the actual memory need.

Performance measurements have become very important tools for companies because of ever increasing global competition in today?s market. Delivery dependability is one of the three most important performance measurements for companies to focus on and that makes this analysis, of the dependability, both very interesting and up to contemporary. In this rapport different aspects of delivery dependability will be dealt with, and a weight will be on what to measure and how to measure it together with how to present the outcome of the measurements. A discussion has also been held regarding what goal the company should have on its dependability.

This report is the result of several interviews of employees within the field of pedagogy. The background behind this report is my period as a trainee in one of the daily activities in Malmo. In daily activities the employers gets training, education and guidance in Marte meo, which is funded by public finances. The method, which this study focuses upon is called Marte meo. It is a method of communicating and developing the means for the participants to evolve their skills in communicating and increase self esteem.

This report has been performed for WSP Construction Design located at Arenavägen 7 in Stockholm. WSP Construction Design is one of the leading departments in Sweden in construction solutions regarding everything from building construction to industrial building. Great competencies regarding steel, wood and concrete constructions are available within the department which is well sought.Crane girders used in the industry are exposed to large loads that vary over time that includes instantaneous lifts and the crane girders movement which lead to the phenomenon fatigue in the crane girder and its ingoing welds. A control of fatigue needs to be performed after a certain lifespan measured in time which in turn is converted to a number of loadcycles. When the number of loadcycles amounts to a greater number the input welds resistance will have been reduced and the rate of utilization thereby increased.