This master thesis work was done by two students at Machine Design at KTH for Lesjöfors Stockholmsfjäder AB. The task was to develop a calculation program for gas springs. The program is going to ease the selection of gas springs for a given case of a lid that should be opened. The program is going to be used internal by sales people at Lesjöfors AB in Sweden and internationally. The program is therefore written in English.The program was developed in Microsoft Visual C# 2008 Express Edition.

This master thesis studies how much the cycle time, i.e. the time it takes for an industrial robot to perform a given task, can be reduced if an extra degree of freedom (DOF) is added to the robot system. The extra DOF consists of a linear track, which is supposed to be used in an optimal way. The problem has been studied using simulations in the robot simulation tool RobotStudio. To be able to run an optimization in Matlab, with the RobotStudio simulation cycle time as the object function, communication between Matlab and RobotStudio has been set up with an interface written in Visual Basic.

Essay means attempt, and is a paper written based on self-experienced dilemmas, which the writer then returns to, reflect upon and discusses on the basis of literature and accepted theories. In this essay, I reflect upon my own professional role as a leisure-time pedagogue. The leisure-time pedagogue must provide activities that in different ways relate to the curriculum 2011. I have therefore a responsibility to influence the students' desire for knowledge. Focus of learning is different from the one in school, with an emphasis on informal learning.The dilemma is that I am unable to do any pedagogical work at the museum because of many conflicts.

Background: Every year about 4600 nurses are examined in Sweden. The work as a nurse is responsible and she is often working under time pressure. Aim: To describe nurse?s understandings about her professional role during her first year after the examination. Method: Systematic literature review, where 10 scientific articles were examined.

The aim of this study is to increase knowledge and understanding of free play or free fun time importance for children of age around five years in preschool, in order to promote children?s development and learning. The focus was on exploring and better understanding of teacher?s and educators? approach to the free fun play time as a tool in their educational work, and also about their own role in this context as well as analyzing of forms, rules and structures spontaneously created by groups of children having free play fun time. Another important moment of this study was to give more light on approaches to this issue in education theories by Piaget, Vygotsky and Freud among others.As to the practical experimental part of the study it has been performed at a preschool and kindergarten in a suburb at the outskirts of Stockholm, with four employed educators there and with groups of children of age around five.

Telia Telesvar is an automatic anwering machine that is provided in your stationary telephone at home. The drawback of this is that you cannot see if anyone has called you. This report describes how a terminal for Telias Telesvar could be designed. Telesvar terminal will show in a display if anyone called you and show the incoming number. It will also play the spoken message in a built in speaker.

BillerudKorsnäs is a leading global provider of primary fiber-based packaging materials and on Gruvöns Bruk in Grums, they have chosen to invest millions in the boiler at the facility to increase the total capacity of the factory. This results in the Pulp Flash Dryer at Gruvön being burden more, which makes it important that it is of great reliability and can be run with a high capacity. The reliability of the Pulp Flash Dryer at Gruvön is not as good as one could hope, which leads to reduced availability and production, as well as to increased maintenance costs. There are a number of different reasons for this, but all the casual links are not known.The purpose of this project was to perform a system analysis of the Pulp Flash Dryer to identify bottlenecks and the most critical parts from a capacity- and availability perspective. Appropriate methodology for the system analysis was used and would be used in a structured way to perform the analysis with data from the process and the maintenance system.

Introduction:A good work environment and good resources among district nurses? and general nurses? are important in the provision of good nursing care. For patient security it is also very important that resources and time are used in an appropriate way. A lot of time is spent on non-core activity, for example administration takes more and more time, which can result in feelings of stress.Aim:The aim was to describe how district nurses? and nurses? in primary care perceived their work environment, how their worktime content was distributed and if there was some connection between perceived work environment and the distribution of work time.Methods:A mapping of the content of the work was made in two parts.

En sammanfattning av uppsatsen på maximalt 8000 tecken..

AbstractThis thesis is the final part of the Innovation and Design Engineering Programme (180 ECTS credits)at the Faculty of Health, Nature and Engineering Science at Karlstad University. The extent of thisthesis is 22.5 ECTS credits and has been performed independently by Hannes Jernberg during thespring of 2013. Metso Paper Karlstad AB is the task maker of this project, and Arvid Johansson is thecompany Representative. Metso Paper Karlstad AB is one of the world leading developer andmanufacturer of tissue paper machines.In the current situation, the company has developed and patented a power management systembased on a Cross Flow Turbine. The current construction is limited to a paper width of 2.9 meters.The company wants to take advantage of all the opportunities provided by the patents, to develop aturbine solution paper machine with a paper width that is wider than 5.5 meters, and give the abilityto manufacture paper for lower energy consumption which is an important part of the production asit is very energy intensive.Problems arise with the increasing length of the turbine, ultimately resulting in that the deflectionbecomes too big and that the momentums, due to the increased torque the turbine blades breaks.By applying the design process, this work has resulted in a number of potential solutions to theproblem.

This thesis is about developing a design that provides improved vacuum seal between a lead coating and a plastic coating during plastic extrusion processes of cables. This report is a part of the course MSGC 17 for Bachelor Engineers in mechanical engineering.The work is performed at Nexans Norway AS in Halden where they have a production of high voltage cables for sea-, and offshore industry. A problem they face is that they do not get enough good seal at the attachment to the plastic extrusion machine. They want to achieve a vacuum between a lead coating on the cable and a plastic coating of the cable for plastic extrusion, which is something they do not achieve today. The thesis is thus to come up with a design that provides better sealing against the cable.The work involves a construction part with the phases of product development processes.

The purpose of this report is to make an evaluation of the self-monitoring for scarification which Stora Enso is using and this study deals with the effects and importance of scarification. A comparison is made in this study with the purpose to highlight any differences between some of the leading forestry companies and significant forest organizations in Sweden. The companies represented in this report are Korsnäs, Mellanskog, SCA, Sveaskog and Södra. In the beginning of this study an interview form was set up together with Daniel Forsberg at Stora Enso. Stora Enso is the head object of this report and seven interviews were made within that company. At the other companies only three interviews were made within each one, with an exception to Mellanskog who wished four.

The purpose of this report is to make an evaluation of the self-monitoring for scarification which Stora Enso is using and this study deals with the effects and importance of scarification. A comparison is made in this study with the purpose to highlight any differences between some of the leading forestry companies and significant forest organizations in Sweden. The companies represented in this report are Korsnäs, Mellanskog, SCA, Sveaskog and Södra. In the beginning of this study an interview form was set up together with Daniel Forsberg at Stora Enso. Stora Enso is the head object of this report and seven interviews were made within that company. At the other companies only three interviews were made within each one, with an exception to Mellanskog who wished four.

The purpose of the house which is the basis of this report is to be able present itself on the market as a relatively cheap and at the same time a climate friendly choice. The house is supposed to be able to be built anywhere in Sweden and the rest of Scandinavia in a short period of time. This puts demand on what kind of heating system the house can have, since not all places have the geographic advantage of being able to use geothermal or district heating. Therefore the heating system choices will only include those that are not limited by their geographic location. The house will be built in modules which only require the groundwork to be done before the house can be erected. In this report "System solutions for plus or passive-housing" a comprehensive literature search has been conducted as well as a number of calculations.

The component workshop at Atlas Copco inTierp intends to reduce the costs inorder to increase their competitiveness.This thesis examines how the productionmanagement around cylinder washersshould be managed in a way that meetsthe customer needs. The customer to thecylinder washer is Atlas Copcos assemblydepartment in Tierp.The purpose of this thesis is to providean alternative way of managing theproduction. A chapter of theory is addedto give the reader an insight ofdifferent types of production managementsystems as well as the underlyingknowledge needed to get a better readingexperience. An introduction of kanbancan in theory help Atlas Copco in thedirection they strive. It should beclear how the purpose of this thesisaffects the cost for the componentworkshop and also how it relates to thecurrent production.