The master thesis ?Mechanical Integration of an IR-detector in a Micro Cooler? has beenperformed at FLIR Systems AB in Danderyd. FLIR Systems is a world leader in the design,manufacture and marketing of thermal imaging camera systems.The thesis project is divided into to two areas, Production Method and Noise.The Production Method concerns the positioning of a detector on the cold finger within the IRcamera.The detector has to be positiond with very high accuracy at the center of the cold finger,so it can be placed in line with the optical axis to avoid movement of the picture during zooming.The positioning of the detector is at present done with the help of specially designed guides on aplate on top of the cold finger. The design workes well but the special machining needed for thisplate is very expensive.The goal concerning the production method was to derive a new more cost effective method forthe assembling and positioning of the detector on the cold finger by replacing the guides on theplate with a reusable equipment or some other alignement operation.Several concept ideas have been generated with the help of concept generation methods in theform of concept classification trees and concept combinational tables. Two of these conceptswere selected to be further refined.

Background: Cerebral Palsy is usually divided into three subgroups: ataxic, spastic and dyskinetic, where children and adolescents can, because of misestimation in nutrition and energy intake, suffer from weight problems.Aim: To compare calculations with equations with the individual's measured RMR in the subgroups, to see if any equation is more suitable. This could be used as a tool to calculate the resting metabolism at times when it is not possible to perform clinical measurements.Method: The RMR has been measured in 37 children and adolescents aged 3-15 years through indirect respiratory calorimetry. Those values have been compared with calculations from five equations. The results were then analyzed in order to find if any equation is better to apply for calculating resting metabolism for each subgroup.Results: The ataxic group was overestimated by 56.5% of the calculated values. WHO/FAO/UNU?s equation indicates a significantly strong correlation between the measured and calculated values (r=0.85, p<0.05).

The thesis aims to compare differentpiping materials in heating systems interms of cost as well as to illustratethe impact of energy characteristics ofdifferent materials over its servicelife. The methods used for costcalculations regarding piping are alsoto be examined to highlight thedifferences between template basedcalculations and more carefully executedones. The work is delimited to discusspipes of steel, copper, plastics andcomposites. The aim is that the resultcan be compiled to illustrate the prosand cons of various materials whenevaluating investments.The main object of the survey is part ofa heating system in the office-block KVSommaren located in southern Stockholm.The configured piping system is designedwith the mentioned piping materials andis used to make up the data for flow andcost calculations. The differentmaterials are calculated in both aconventional manner with a supplementarycost for additional fittings and with amore accurate quantification of thecomponents.

AbstractIn urban societies people spend more and more time indoors, which put great demands on the indoor environment. If the ventilation is to manage the removal of unwanted substances in the indoor air, a good mixing of the air is required. The question arises that, whether the buoyancy forces will counteract a good mixing of the indoor air or not?This report aims to clear up the difficulties whether you need to consider the buoyancy forces or not, when adjusting a ventilation unit. For studying the indoor mixing of the air a two dimensional model is constructed in COMSOL Multiphysics.

This report deals with handling and interim storage of soils which are planned tobe reused in construction works. The types of soils that are dealt with are gravel, topsoil and sand. The thesis work has been carried out in collaboration with Skanska Sverige Väg och Anläggning Sydost. The main goal is to find an area for using to store soil in between projects.Studies of laws and regulations regarding exploitation and storage of soil has led to a theoretical background upon which the report is based. Background informationhas also been gathered in meetings with the employees at Tekniska Kontoret and Länsstyrelsen in Jönköping.On the basis of literature studies results, a general template has been developed for which desirable properties a possible location should meet.The model was applied to find a number of possible options in the vicinity of Jönköping.

Abstract    Objective: The aim of the present study was to investigate if inclinometer estimates of arm posture during paper mill work differed between periods of different arm visibility. The aim was also to identify strategies for and difficulties in assessing body-visibility on video. Methods: The study consisted of two parts, where part 1 aimed to investigate the validity of observation-based assessment of arm posture during paper mill work. Study 2 was a survey among people with experience in assessing the posture of paper mill workers from video. Results: The total time for the right upper arm visibility indicates that it was on average visible in 54%, partly visible 15 %  and not visible 31%.

The aim of this report was to do a case study at a geothermal heating system which has been in operation for about 5 years, and study if its performance has changed during this period of time. A literature study about the processes involved was also done in purpose of background knowledge.The tenant-owner?s association Duvan at Petterslundsgatan in Uppsala installed year 1999-2000 a geothermal heating system. The purpose of this installation was that they hoped it would lead to a smaller usage of district heating which would lead to a reduction of the heating expenses for their buildings. The geothermal heating system consists of 19 energy wells and 4 geothermal heat pumps, and it is one of the first systems of that size in the region of Uppsala.

In the global and rapidly changing society Environmental scanning is becoming a more and more important tool. Today it is not the availability of information that controls an organizations behavior, but the information that the organization chooses to absorb. This is the case for a multinational cooperation as well as for the local golf club. Swedish golf clubs have during the last 100 years had an amazing development and today there are almost 600 000 registered Swedish golf players. The development has however stopped and even declined some during the last couple of years.

Järnvägsbron vid Årstaberg kommer när den är klar att mäta 1,4 km, här passerar över 550 tåg per dygn. Bron är en del av projektet Citybanan och kommer att fungera som en spårväxel som styr fjärr-, regional- och godståg till den gamla östra Årstabron. Pendeltågen kommer då färdas på bron över Årstaviken och in i den nya järnvägstunneln vid Södra station.Entreprenaden gick från början till danska företaget Pihl och Son som efter en del problem gick i konkurs, underentreprenören Züblin fick då ta över projektet. Med en ny platsledning gjordes en hel del förändringar på arbetsgången och arbetsmomenten. Från 4 veckor per sektion, där en sektion mäter ca 30 meter lyckades Züblin tillslut effektivisera till 2 veckor.

Municipal Real Estate Companies runs by a political boarder who makes decisions in large investments. In some cases the municipal counter have to take the decisions about big and expensive investments. A successful investment needs to be built on solid ground.Media has lately focused on energy topics as a part of the environmental discussion and the real estate companies tries to use the new technology that the market has provided. Energy investments in new buildings are not longer a small part of the energy saving program. Long-term investment demands needs large knowledge and awareness about the energy topics that have recently grown in the municipal real estate companies.

Sweden has distinct seasons with cold winter and temperatures down to minus 25 ?C andpleasant summers with temperatures above 20 ?C. During spring and autumn there could becomechallenges with precipitation. The diverse climate in Sweden affects many homeowners. For thepeople living in leisure boats and permanent housing boats the seasonal changes are clearlyimpacting their economy and the indoor climate.

In Sweden there are about 4 million hectares of bare peat (mire). This land has great potential to be transformed into productive forest land, provided drainage is carried out and, in some cases, even fertilization with ashes. Drainage of mires is necessary because the high groundwater table prevents trees from growing due to reduced oxygen availability. Some of the key nutrients that trees need to grow appear in too small quantities in mires, especially potassium (K) and phosphorus (P). Ash from the combustion of biomass contains these elements and is therefore suitable as a fertilizer.

Stockholm city has recently raised its ambitions for bicycle traffic, the goal is to achieve a larger andsafer bicycle traffic. But cyclists are more vulnerable on the roads than other vehicle users because of the lack of protection. This means that a large proportion of road safety for cyclists is based on the design of the traffic environment. Since most serious bicycle accidents are those that occur in conflict with motor vehicles, and the majority of these accidents occur at intersections, these areas are of great importance forcyclist?s safety.The  purpose  of  this  paper  is  to  highlight  bicycle  accidents  at  intersections  and  to  suggest improvements  in three accident-prone junctions  in Stockholm.  This is  achieved  by  the study of accident statistics, literature and finally three case studies.The literature study focused on cyclists, traffic safety and traffic safety measures.

Detta examensarbete har utförts i samarbete med Löfqvist Engineering i Örebro. Uppgiften har varit att utföra en simulering av en stor automatiserad produktionslina som ska användas vid tillverkning av avgassystem till lastbilar. Utifrån denna simulering skall exakta cykeltider för produktionen bestämmas. Dessa tider kan sedan användas av Löfqvist Engineering för att verifiera tidigare uppskattade tider.Arbetet inkluderar en litteraturstudie om Lean Production och hur det fungerar ihop med automation. Det finns även med lite bakgrundsinformation om Just In Time, olika filformat och robotsimulering i allmänhet för att ge en bättre överblick av ämnet.Programmet som har valts för att utföra simuleringen är Tecnomatix Process Simulate och den inbyggda Line Simulation modulen.

The purpose of this thesis is to evaluate and update load curves for Fortum Distribution AB. Theload curve method is a tool used to forecast the strain of an electric grid. The method is based oncustomer annual energy consumption, outdoors temperature as well as customer category. Theload curve method was established by Svenska Elverksföreningen at the start of the nineties andfocus was put on standardizing annual energyconsumption, in order to make the method usableacross the nation. Present consumption patterns have changed since the original load curves wereproduced, which leads to a need to update the load curves.The work began with an update of present load curves according to recommendation taken fromanother earlier thesis.