Åtta semi-strukturerade djupintervjuer genomfördes i syfte att kartlägga svenska formgivares och förlagsanställdas strategiska och kreativa arbetsprocess samt olika attityder vid arbetet med praktverk och coffee table-böcker. Dessa böckers termer och definitioner diskuterades även, samt boktypens förut-sättningar och utmaningar på marknaden. I denna rapport presenteras funna teman rörande dessa tankemönster och attity-der, samt en generell beskrivning av arbetsprocessen. Produktionen av coffee table-böcker och praktverk fanns vara komplex på grund av att den involverade många personer, tog lång tid i anspråk, var kost-sam och hade relativt små vinstmarginaler vilket därmed kunde förenas med vissa risker. Respondenterna upplevde generellt arbetet som spännande, roligt och givande.Studien belyser även förekomsten av en viss diskrepans vad gäller associationerna till termerna ?coffee table-bok? och ?praktverk?.

This report describes the process of outlining a design proposal for a resource planning tool for TV post-production. A feasibility study in form of a participant observation has been carried out on-site, which has resulted in a requirement specification. Based on the requirement specification, mockups have been created to illustrate the functions and features that a final planning tool should have. In addition to developing a design proposal, an evaluation of the existing resource planning tool Ganttic has been conducted. Ganttic has been reviewed based on how well it meets the list of requirements.

Lyckeby Starch AB is a farmer-owned company that produces products based on potato starch. In order to increase their production efficiency and their international competitiveness the company is investigating the possibilities of keeping their factories open longer. To achieve this, potato has to be stored for a longer period of time than what is practiced today. Starch potato is usually stored in large piles covered by straw and plastic, either in the field or on the farmyard. The objective was to examine in what way starch yield (starch content*tuber weight) in three different potato varieties was affected by storage in two different types of storage piles. The potato was stored for three months in total and starch content and tuber weight were controlled throughout the period. Stored tubers were also visually examined and prescense of mechanical damage as well as wet rots and dry rots was recorded. Bacteria and fungi were isolated and identified. In general, varietal differences were greater than differences between the storage piles.

The background to this study is the government’s investment in design and the increase of design education around the country. As a future design teacher (industrialdesign) at high school/college, it is of great interest for me to look closer at student’s attitude towards design and design educations at high school.Questions that have been investigated are student´s attitude towards design; design as a concept but also as a phenomenon. How does the student counselor inform the students of the differentchoices before choosing high school?Does the students view on design correspond to what the student counselor say?What opinion does the student counselor have to the concept design as well as design in highschool? Is design just a craze or here to stay?To get answers I have made interviews with student counselors at two different schools, I have also been in contact with a student counselor on the internet. Their thoughts will clarify thesituation that the students might be in.

In this thesis we present the procedures and outcomes of adopting two roles in a study: the role of a researcher and the role of a designer. The subject is crossmedia design. Crossmedia is a growing and changing trend for media producers of today its design is of great importance. The purpose is to create a concept from scratch that stands out from the crowd and engage people with the use of cross media as the approach. We also aim to investigate if a cross media designer can rely on previous research made within this subject or if the scene has changed.In order to test and to fully understand the process of the subject, we designed a crossmedia concept, based upon previous and related research.

This report describes the work process to an interactive movie addressed to children with neurodevelopmental disabilities, where Jippieserien is the client. The aim is to explore how multimodal media can convey Jippieseriens message to children with neurodevelopmental disabilities and their parents, by taking the users needs into account.It is important to focus on the people who will use the system when designing interactive systems. This project is therefore using the designprocess human-centered design for interactive systems. The process includes four basic elements and provides guidelines for user-centered design. These parts are analysis, prototyping, implementation, and evaluation (Johansson.

The aim of this report is to see whether the graphic design of a game influences children?s will to play games. I am especially looking at minimalist graphic design and how well it works for a game aimed at children age 7-9. Does the style of the game design have any impact at all concerning the children?s wish to play the game or is the game mechanic all that matters.

This report is founded in lack of knowledge concerning the design and layout procedureduring a new engine room construction.The prime question is how the engine room takes its form from idea to construction and whathappens in between. We want to give the reader a better understanding in how the work isdone and why it is designed the way it is concerning layout, ergonomics and safety. Duringthis report we will enhance the knowledge concerning regulations and rules that are of greatsubstance such as SOLAS, Swedish Sjöfartsverket and IMO.By contacting the parties involved in the process in newly designing a vessel and its engineroom, we will assume their approaches and experiences. We will study the work progressfrom planning to construction of a vessels machinery spaces. We will with the help ofinterviews with interested parties get an idea of the approach and also compare the finishedproduct a bit depending on company size and resources.The investigation resulted in a good basis for how a ship engine room design takes shape andwhich aspects are taken into account, however, we found that the existing rules concerningengine room layout was very vague and was seen as the most recommendations.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

The use of mobile devices has increased dramatically in recent years and the development of newtechnologies has made it difficult for developers to know what screen size and device the visitor isusing. This has resulted in the fact that today there is a problem with the interface for web pages onmobile devices. They are not adapted to the flexibility required for the interfaces to be recognizedon various mobile devices. Instead of developing two separate web pages, where one is designed formobile devices and one for desktop and keep them both continously updated, responsive webdesign simplifies the work process. Responsive web design is a flexible and dynamic interface thatadapts to mobile device and screen sizes.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

The project was based on a request to improve an already existing program and hardware at the electrical engineering department at the royal institute of technology. For maximum ease of use, tests have been done on students to properly design the program for what it is meant to be used for. These tests have been transcribed and analysed, then brought back to the group in a discussion and then transcribed and analysed again, I call this process the ?four step process? (this process is presented and explained in chapter 6.4.). A part of this master thesis was also to analyse the four step process to enhance validity of this research.The project resulted in a new program with a new graphical view and features to help students and researchers to work with the technical tool for electromagnetic readings of planar objects.

This essay discusses joist floor, and the land-building at these structures. In Malmoe there is a neighborhood called Trumman that has a courtyard where an underground garage is located. What possibilities are there in this place and how would an alternative design look? These issues will this essay answer. In the result part it is both described how the joist in Trumman looks and how it is built correctly.

The purpose of this project was to design an adjustable gutter bracket for Lindab Profil AB. Lindab currently manufacture a gutter bracket that is adjustable in angle, however, this model has some drawbacks.  One of it´s shortcomings is that it is somewhat difficult for the customer to mount.  Another problem with Lindab?s current model is that the design makes manufacturing unnecessarily complex. The new gutter bracket, that we have constructed, does not have these problems. It is adjustable for different roof pitches.

During the spring of 2013 we developed a visual identity for Jönköping Bandy, a bandy association in Jönköping, which was founded in 1947.Jönköping Bandy?s main problem was the low interest for the association by the local people. The association also had problems with the economy, which made it hard for them to merchandise themselves.In Jönköping, there were a lot of sport associations, and therefore, it was difficult to find sponsors. One way to help the association, was to create a good visual identity for them. A visual identity that would reflect on the proper values of the association.The intention was: ?Through graphical design, we want to convey Jönköping Bandy to a larger amount of people, and get increased knowledge in graphical idiom.? and was torn apart into these three questions:What core values does Jönköping Bandy have, and how can we convey them through the visual identity?Which visual materials does Jönköping Bandy need?How do other teams in Allsvenskan Södra merchandise themselves through their websites?The work began with a study of relevant theoretical literature, with focus on graphical design.