This bachelor?s degree thesis was conducted in mechanical engineering at Halmstad University during spring semester 2010 in close collaboration with the company Gremo AB, located in Ätran, Sweden. Gremo AB produces, developes and sales forest machines in both Sweden and on the international market.Gremo AB belongs to one of the market leaders in forest industry, especially with their forwarder. In order to become a market leader even with their harvester, the company decided to change the harvester to have a swivel and a leveling driver cabin.The aim with this bachelor?s degree thesis was to develop a design concept for the harvester driver cabin, which Gremo AB can apply on the new harvester.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

Att designa en generell och utbyggbar mjukvara är inte enkelt, då det krävs en bred kompetens inom många olika områden. Vi belyser i detta arbete en del av problematiken kring design. Utgångspunkten är ett praktikfall vars målmiljö rör processer och integrationer. Huvudfokus ligger på designmönster, men även en bredare genomgång av ämnen så som utvecklingsmetodik, Service Oriented Architecture (SOA), Web Services (WS) och utvecklingsmiljöer presenteras. Arbetet bedrivs i enlighet med riktlinjer från Rational Unified Process (RUP) och slutprodukten är en checklista på tre punkter.

This bachelor?s degree thesis was conducted in mechanical engineering at Halmstad University during spring semester 2010 in close collaboration with the company Gremo AB, located in Ätran, Sweden. Gremo AB produces, developes and sales forest machines in both Sweden and on the international market.Gremo AB belongs to one of the market leaders in forest industry, especially with their forwarder. In order to become a market leader even with their harvester, the company decided to change the harvester to have a swivel and a leveling driver cabin.The aim with this bachelor?s degree thesis was to develop a design concept for the harvester driver cabin, which Gremo AB can apply on the new harvester.

Between 1965 and 1975 a major housing project was carried out in Sweden to resolve a major housing crisis, the so-called one million housing program (Swedish: miljonprogrammet). To raise the standards and create a more attractive housing in these areas is currently a very relevant topic in Sweden.Evidence-based design is the process of basing decisions of the built environment on credible research and studies to achieve the best possible outcome. This method is primarily used in the healthcare sector to improve quality of care and reduce costs by creating healthy environments.The possibility of refurbish apartment buildings from miljonprogrammet using evidence-based design has been studied by means of an extensive literature review and a closer examination of the residential area, Husby in Stockholm, which has been chosen to represent the miljonprogrammet in its entirety. Furthermore, the evidence-based research has been limited to seven fields; nature, noise, color, wayfinding, safe environment, daylight and thermal comfort which has been assessed to be applicable on housing. In order to obtain a comprehensive overview of the different fields, four different subjects were chosen to investigate further within each field; research and studies, laws and regulations, constructional aspect and Husby.

Service Design is a relatively new, unexplored and exciting phenomenon that through an interdisciplinary work methodology designs services. A discussion has been going on for a long time regarding whether there is a difference between products and services. Services are often classified as immaterial, heterogeneous, non-storable and inseparable in relation to products. A question that arises is if something specific characterises the work methodology used regarding service design. The aim with this paper is thus to explain the work methodology when working with service design.

This report is the result of a thesis at the company Sanmina in O?rnsko?ldsvik. The thesis is the final work at the mechanical engineering program at Umea? University.Sanmina has in 2015 launched an initiative to ensure that all sites are using LEAN principles and tools to enhance their business. As part of the plan for the LEAN-work, an LSS (Lean Six Sigma)-project has started to study the company's receivehall and inspection.

This paper is about transferring a feeling from a physical place to the Internet. The paper explores methods on how this transfer is done. Websites have a tendency to not portray the company behind it in a correct way. For companies with a distinct esthetic and work hard on their image and brand it is important that this hard work is portrayed correctly in every aspect. The problems this paper explores are: the importance of personas in a design process, methods of transferring a feeling from a physical place with design and how this can be tested, and using open-source content management systems in creating usable websites.

Detta arbete är sekretess belagt under de närmaste två åren och därför kommer bara sammanfattningen att publiceras för tillfället..

This report contains a degree project made by the mechanical engineering students Lennart Andersson and Daniel Jansson. The project has performed in assignment by SOMAS Valves AB in Säffle. SOMAS are leading in development on control and on/off valves. To maintain this position they always want to improve their products. One way in this development is valves that are more tightened.The purpose with our project was to investigate another seat design on a HiCo (High Cobalt Alloy) seat to a SKV 150 PN 25 valve and compare this to an original HiCo seat.By modifying the seat on a ball valve we want to achieve a valve that leaks lesser then a valve whit original seat.

We live in a high tech era of electronic media, which is changing our lives (Giddens, 1999). Apps are examples of technologies that affect our lives. An interesting question in this context is what apps will have for significance; on one hand for the development of technology, and on other hand for humans? relation to technology. Since the development and change process are central issues in the science of education I will explore the development of applications.

 Agila metoder är en relativt ny ansats inom programvaruutvecklingsområdet och ses som en reaktion mot plandrivna metoder som har svårt att hantera oförutsägbara och skiftande krav. Agila metoder förespråkar nära och frekvent kundkommunikation och iterativt arbete för att ständigt kunna skapa, prioritera och verifiera krav. Dock uppmärksammar inte agila metoder aspekter som berör programvarans användbarhet. Syftet med rapporten är därför att integrera användarcentrerad design för att öka fokus mot programvarans användbarhet hos agila metoder. Användarcentrerad design är en process som fokuserar på användbarhet genom att användarna är en central aspekt i utvecklingsprocessen.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

ESAB is a world leader in production of welding consumables and equipment. The company manufactures, among other things, welding electrodes. A roller straightening unit is used in the cutting process to straighten the wire, which the welding electrode consists of, by adjusting some of the rollers during operation. According to ESAB?s standard and the European machinery directives, moving parts of machinery, such as rollers of the roller straightening unit, must be out of the operator?s reach.

Ett mönster är uppbyggt av ett motiv som upprepas. Denna upprepning kan fortsätta i all oändlighet. Hållbar antyder långsiktighet. Mönstrets övergripande egenskap är oändlighet. Hur kan denna egenskap hos mönstret nyttjas inom mönsterdesign för att främja hållbar utveckling? Det här kandidatarbetet undersöker mönsterdesignens möjlighet att verka för hållbar utveckling genom att se till begreppet mönster ur ett bredare perspektiv, samt i relation till design för hållbar utveckling.