A persistent problem in the construction industry is its low margins of profit. It is often difficult to earn money due to low efficiency and high costs. Logistics on the construction site answers for a large amount of these costs and it is therefore of interest to find new, more efficient logistic solutions. The purpose of this thesis is to compare two different logistic systems and further to evaluate which one that is the most efficient and profitable. A comparison is made between the traditional logistic systems used for years and a new logistic system developed by an industry association called BEAst.

Examensarbetet behandlar en jämförelse av Server Message Block 3.0 och föregångaren 2.1 i ett befintligt nätverk. Jämförelsen utfördes i fyra laborationsmiljöer bestående av fyra operativsystem: Windows Server 2008 R2, Windows Server 2012, Windows 7 ochWindows 8. Sammanlagt har fyra tester utförts: Förstudie, Test 1, Test 2 och Test 3. Förstudien utfördes för att testa nätverksprestanda mellan två datorer. De andra testerna satte SMB 2.1 och SMB 3.0 på prov.I Test 1 ansågs SMB 3.0 prestera sämre än SMB 2.1, för att bekräfta resultaten kontaktades Jose Barreto på Microsoft.

This thesis for the Master of Science degree was performed at Solectron Corporation in Norrköping. The background for the thesis was a need to develop and build two test fixtures to automatize testing and adjusting of transmitter modules (TX-fixture) and receiver modules (RX-fixture) which are head devices in DWDM-systems. The basic elements for the test fixtures are: Test board, switch board and DC/DC board. The main function of the test board is to handle communication between the transmitter and receiver modules and supply voltage to these modules. The test board was insufficient and modified with a microprocessor to handle the communication between the PC and the receiver module.

Syftet med studien är att undersöka om en geografiskt begränsad marknad inom byggbranschen underlättar en implementering av Lean Construction. För att undersöka detta har jag utgått från två forskningsfrågor: vilken inställning de tillfrågade byggföretagen har till Lean Construction och hur de arbetar utifrån ett Lean-perspektiv? Utifrån ett antal grundprinciper från Lean Construction formades en enkät för datainsamling. Resultaten från undersökningen visade att respondenterna som bestod av platschefer/arbetsledare och underentreprenörer överlag tyckte att de områden som tagits upp var viktiga för en lyckad byggprocess och en stor del av respondenterna även arbetade utifrån ett Lean-perspektiv. Enkätundersökningen tog upp nio områden: samarbete, Visible Planning med detaljerade veckoplaner, Just-In-Time, slöseri, standardisering, Kaizen, innovationer, Last Planner med arbetsplanering och Percent Plan Complete från Last Planner konceptet.

The use of silicon carbide (SiC) as a base material in power electronics has manyadvantages, including high breakdown voltage and excellent temperature endurance.However, the packaging of such electronics presents major challenges and there is aneed for packaging that can operate in higher temperature. The purpose of this thesishas been to develop a test method and verify the functionality of SiC powertransistors prototypes with a new packaging technique developed by Swerea IVF AB.It includes setting up an electrical test-bed for power and high temperature cyclingand analysis of the results. Even though test confirmed functionality after thepackaging process, (at room temperature) the performance seemed to have been reduced. This could be a result of the measurement setup and the packaging process.In higher temperature the transistors failed to operate longer than a couple ofminutes which showed the weaknesses in the design and the challenges with this typeof packaging..

The problems caused by the current engine casing in aluminum for Volvo Buses Corp. are the mainfoundation for this degree project. Lack of maintenance combined with a construction poorlyadjusted for assembly has resulted in the fact that the engine casings rarely get reassembled whenthe service is completed.The degree project has mainly been following ?Olssons. F, Principkonstruktion, Compendium, Lund?and ?Olssons.

This report deals with activities that from a CSR perspective are considered to create a shared value for a medium-sized construction company in Sweden. The CSR definition used in the report is the European Commission?s since it reflects the valuecreating aspects of CSR, in contrast to the traditional philanthropic aspect of CSR.Companies in the building construction industry have difficulties identifying activities that create value in society and in the company. The aim with the project is to, from a CSR perspective, identify and evaluate value creating activities in a building construction company. The activities will be evaluated with respect to competitiveness and how they can be implemented into an organization.

Today there are many system development projects that break both budget and time plan. Often this depends on defects in the information systems that could have been prevented. The cost of test can in some cases be as high as 50 % of the projects total cost and it's at the same time an important part of development. Test as such has moved its focus from the software it self and its faults to a wider perspective on whole infrastructures of information systems where assure a good quality is important. Sogeti in the Netherlands have developed a test method called TMap (Test Management approach) that can be used for structured testing of information systems.

Ground construction has to a large extent been dominated by traditional meth-ods during the last 50 years. Although the construction has been changed meanwhile innovations are not accepted. In collaboration with NCC Ltd Region South, I have examined a modern con-struction methodology that has been developed by NCC for future large pro-jects. The method is divided into two central phases. Phase 1 is? Single Pro-duction? which is a preliminary period for ground constructions to come.

Syfte: Syftet med den här studien var att undersöka repeterbarheten hos Schirmer I test samt att undersöka om det fanns något samband mellan Schirmer I test och enkäten TERTC-DEQ.Metod: 26 personer deltog i studien. Innan första mättillfället fyllde försökspersonerna i ett informerat samtycke och enkäten TERTC-DEQ. De undersöktes med hjälp av ett biomokroskop och deras ögon graderades med hjälp av Efron och CCLRU grading scales innan första mättillfället. Schirmer I test mättes vid tre tillfällen med en veckas mellanrum.Resultat: Resultatet av mätningarna visade att det var låg repeterbarhet hos Schirmer I test om man utför tre upprepade mätningar. Resultatet visade också en korrelation mellan testresultaten och enkäten TERTC-DEQ (r=-0,6184), det vill säga de försökspersonerna som hade ett högt resultat på Schirmer I test hade också en låg summa på enkäten TERTC-DEQ.

Today there are many system development projects that break both budget and time plan. Often this depends on defects in the information systems that could have been prevented. The cost of test can in some cases be as high as 50 % of the projects total cost and it's at the same time an important part of development. Test as such has moved its focus from the software it self and its faults to a wider perspective on whole infrastructures of information systems where assure a good quality is important. Sogeti in the Netherlands have developed a test method called TMap (Test Management approach) that can be used for structured testing of information systems.

During the 1990?s a large number of building projects were revealed where lack of moistsafety precautions during the construction process had led to extensive moisture damage. Alsoresent implemented studies have shown that the problems with moisture damages have ratherincreased than decreased during the past few years. Moist is considered to be one of the mainfactors to cause unhealth due to deficiencies in the indoor-environment and does also causeunnecessary expenses and a reduction of the confidence in the construction industry.In this Bachelor of Science thesis three projects have been reviewed to examine how moistsafetyhas been observed during the construction process. Main focus has been to identify thebuilding components that are the most exposed to moist, and to examine how they have beentaken into account during the period of design and construction.

Syftet med detta examensarbete är att på uppdrag av Volvo Construction Equipment hitta en metod för att hantera och kategorisera idéflödet i deras idéhanteringssystem Interact. Den metod som användes var kvalitativ innehållsanalys. Slutsatsen är att metoden gick att använda för att kategorisera idéflödet men att ett material som sträcker sig över många ämnen tenderar att sänka tillförlitligheten på resultatet. Vidare bedöms materialet som detta arbete har producerat kunna användas för att bättre ta tillvara på idéer, vilket uppskattas av Volvo Construction Equipment..

The purpose of this study is to investigate the method called zero recognition that is used in accounting for construction contracts when the outcome is uncertain. When this is the case it is hard to make the necessary estimates needed for the percentage of completion method to be used. Both the meaning of the method from an accounting perspective and the practical importance and purpose of the method is investigated. The method used for this study is the qualitative one and the deductive model is used to relate the theory with the empirical research. The theoretical background consists of accounting theory and theories about individuals, companies and markets.

Looking at the debate on nuclear power in Sweden, the issue of risk is central to understanding the difficulties in resolving differences between proponents and opponents. I sought to answer the research question: "how is the concept of risk constructed in the nuclear power debate in Sweden?" Four main aspects of risk construction were defined and investigated to identify differences between sides in the debate. Through a qualitative study of the debate and its actors I found clear differences in respect to all four aspects of risk construction. First, the perception of nuclear power as a "normal risk" is common among nuclear opponents in contrast to a largely probabilistic view among proponents.