I denna rapport redovisas arbetsgången för produktutvecklingen av ett rullstolsunderrede med nya design- och konstruktionslösningar. Det slutliga konceptet är ett underrede med två centrala konstruktionslösningar; en hydraulcylinder som medger vertikal sitthöjdsjustering, samt en vaggfunktion i sittplattan som medger ökad balans vid vinkeljustering. Samtliga funktioner på underredet har anpassats för att erbjuda ett enklare och renare ramverk..

Title AB Volvo Pentas packaging system ?process and packaging logisticsAuthor Peter Powell, Lund's Technical CollegeSupervisors Annika Olsson, Lund's Technical CollegeJan Svensson, AB Volvo PentaProblem - Packaging requirements ? Which requirements are there, how do they affect each other and how are they fulfilled?- Packaging process ? what is the line of action when developing new packaging and making adjustments in existing ones? Who has the responsibility to do what?- Packaging logistics ? How is the packaging system adapted to transport efficiency and handling?Objective To create an overall picture over how the packaging system affects and is affected by different functions and players within and beyond the company boundaries, to give a clear picture of how changes in the packaging system is made today and how it could work and finally to give suggestions for cost savings affected by the packaging system.Method The methods used for this thesis has mainly consisted of action research and at some extent case studies. As a previous employee at the department of logistics at Volvo Penta I?ve taken part of the environment, information and prerequisites that this thesis discusses on a daily basis. Case studies have been used for the collection and analysis of data concerning packaging logistics as I?ve chosen to consider only specific markets and packaging.Conclusions This thesis has highlighted the demands that are placed upon engine packaging throughout all concerned units and how these demands affect each other, positively and negatively.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

Problem StatementAfter the hurricane Gudrun in January 2005 EON Elnät Sverige AB started the project KRAFTTAG, were 17,000 km of the airborne power grid shall be replaced with cables underground. The transformers in the airborne power grid shall be dismounted, renovated if necessary and then conveyed to stations, of type kiosk.Additional new transformers, more than planned, have been bought. This is due to the dysfunctional transformer flow from the demolished power supply to projects, were the new power supply is built, the general picture is complicated, since the reconstruction involves other companies and many employees at E.ON.PurposeThe purpose of this master thesis is to map and understand the existing transformer flow. The objective is to make a recommendation on how to increase the level of E.ON? s transformer recycling.Methodthe authors have worked with a system approach, including both qualitative and quantitative data.

Detta examensarbete har utförts i samarbete med Löfqvist Engineering i Örebro. Uppgiften har varit att utföra en simulering av en stor automatiserad produktionslina som ska användas vid tillverkning av avgassystem till lastbilar. Utifrån denna simulering skall exakta cykeltider för produktionen bestämmas. Dessa tider kan sedan användas av Löfqvist Engineering för att verifiera tidigare uppskattade tider.Arbetet inkluderar en litteraturstudie om Lean Production och hur det fungerar ihop med automation. Det finns även med lite bakgrundsinformation om Just In Time, olika filformat och robotsimulering i allmänhet för att ge en bättre överblick av ämnet.Programmet som har valts för att utföra simuleringen är Tecnomatix Process Simulate och den inbyggda Line Simulation modulen.

Several technical solutions are ready to step forward as the new generation of propellant, and this report aims to explore the possibility of commercializing fuel cell cars. The report is based on current research and data from today's Technology and Engineering solutions that are estimated to be commercially realized before 2020.A mapping of today?s different fuel cell options has shown that the most suitable fuel cell option is the Proton Exchange Membrane Fuel Cell, which uses hydrogen as fuel. The report is focusing on a techno-economic well-to-wheel analysis of hydrogen and the energy balance and costs in a system perspective. The basis for this analysis consists of two centralized methods of production, steam methane reforming (SMR), and alkaline water electrolysis.

This degree project has been carried out by Oscar Adolfsson and Marcus Blomqvist, during the spring of 2010, both studying to become Bachelor of Science in Innovation and Design Engineering, at Karlstad University. The degree project includes 22,5 credits.The work is done on behalf of Etac Supply Center AB in Anderstorp. Etac is a company developing and manufacturing home health care products, with operation in Sweden, Norway, Denmark, England and Germany, and with sales worldwide. Bo Lindqvist, R & D manager has been the contact person at Etac.During the project the students has had a workplace at Semcon Caran AB in Karlstad. Semcon has also been helpful as a sounding board.The objective of the work has been developing a new, wall mounted shower chair, assigned for persons with difficulty to stand up while showering.Etacs requirement of the shower chair is that it should be able to support a user with a weight of 100 kg, the chair shouldn?t have any outrigger, optional should be armrests and backrest.

In this Bachelor Thesis (20 p.), we present the history and development of "Intelligent Houses", and most important- explore some of the future possibilities in this area. The project has been carried out through an interdisciplinary cooperation between three different educations at the Blekinge Institute of Technology. By conducting a dialogue with various actors with different professions, we have been trying to identify needs within the concept of "Intelligent Houses", were the end user is not only the tenant or homeowner. Through Participatory Design methods, such as a Future Workshop, we have brought the users together to discuss their own and each others needs and hindrances in their respective work practice, and how intelligent house technology could improve their work conditions. We have also been testing a highly sophisticated CO/CO2/Moisture/Temperature/Enthalpy multi-sensor & controller, originally developed for regulating indoor climate systems. Based on the needs we have found in our fieldwork, we have been looking at possibilities to make multi user solutions with the sensor..

This is a thesis for a Bachelor Degree Project, performed in the subject MechanicalEngineering. The students Roger Malmberg and Simon Hagberg have carried out adesign project on behalf of the recently established company J&D Assisting systems,located in Halmstad.The project consisted in developing J&D's first prototype of a power assisting solutionfor wheelchairs. A power assisted wheelchair combines human power, which is deliveredby the arms through the pushrims, with electrical motors, which are powered by a battery.The power assisted wheelchair is aimed at customers, who have used a regularwheelchair for a long time, but who have become weaker or just need additional powerwhen driving uphill. This kind of wheelchair will provide additional power for users,which will spare their wrists, elbow and shoulders. The product is torque sensor free andinstead it relies on the velocity.

AbstractThis bachelor?s thesis at the Department of Production Engineering at the Royal Institute of Technology in Stockholm deals with the subject of automated metrology. The degree of automation of tasks within production has been a growing trend but the measurement of quality has not followed the same trend. The main thesis follows:What incentives are there to automate the measurement of quality in production?What factors are crucial and why are not all metrology automated?The thesis comes along with a number of sub-queries and delimitations.The working method includes both theoretical and empirical studies.

As artificial intelligence (AI) has gained more influence in recruitment, both recruitment processes and the role of the recruiter are changing. This study aims to describe and analyze how recruiters translate, use, and relate to AI in their work. Through a qualitative method based on semi-structured interviews and document analysis, the study explores recruiters? experiences, attitudes, as well as perceived obstacles and opportunities regarding the use of AI in recruitment. With a theoretical foundation in translation theory, fashion, and imitation, the study examines how AI is not only followed as a trend, but also shaped and adapted locally through translation, depending on organizational identity and needs.

Syftet med detta examensarbete var att utvärdera tre olika metoder för mätningav energiomsättning hos människokroppen med förhoppningen att kunna komma fram till en enklare metod vilket kan underlätta främst för patienter men även för sjukvårdspersonalen. Utvärderingen grundas på mätningar av BMR.Det finns flera olika metoder att mäta energiomsättningen och jag har använt mig av indirekt kalorimetri (referensmetod), bioimpedansmätning (BIA) och Sensewear Armband. Den sistnämnda är en helt ny metod och det är denna metod som främst har utvärderas gentemot de andra. Mätningarna med alla tre metoderna utfördes vid samma tillfälle efter fasta för varje försöksperson (n=10)och patient (n=2). Armbandet bars i tre dygn, indirekt kalorimetri mättes under 30 min och BIA mättes vid ett tillfälle.

Development of services that?s provided through mobile application technology in today's modern IT society has become a full-fledged market where numerous players trying to make themselves heard in everything from innovative new services to the further development of existing services. In these services actors wants to find new areas of use by taking advantage of the mobile technology.We have investigated how value is created and how the value is captured in the services provided through mobile applications. Through this, we wanted to identify the critical success factors in how a newly developed service should be designed to create value. This has been done through a thorough literature review, together with an indepth evaluation of existing applications.

Sandvik AB är en högteknologisk verkstadskoncern som omfattar affärsområdena Tooling, Mining and Construction och Materials Technology (SMT). Sandvik Materials Technology är världsledande inom rostfria och höglegerade stål, specialmetaller, motståndsmaterial samt processystem. Inom SMT drivs ett inköps- och råvaruoptimeringsprojekt (IRO) som har målet att minska lagernivåerna av köpskrot och legeringar i råvarulagret på skrotgården. Kapitalbindningen anses i dagsläget vara för hög. Därför är det viktigt att ta reda på hur det interna flödet av returstål ser ut, för att på det sättet kunna förbättra lagerstyrningen.

The main objective of this thesis was to develop appropriate strategies and find factors that affect the usability of parameterized designs. This was accomplished by investigate the user-interface and how it is designed to meet the user's information needs. The thesis also embraces the basic theories in terms of investigation, cognitive design principles and human behavior patterns in the interaction with the machine. The approach has led to an explorative investigation in this subject area.The thesis also had the purpose to achieve more efficient ways for development of motor chainsaws at Husqvarna AB's department Global Cutting Equipment. That can be achieved through reduce costs of development per sold unit.