BillerudKorsnäs is a leading global provider of primary fiber-based packaging materials and on Gruvöns Bruk in Grums, they have chosen to invest millions in the boiler at the facility to increase the total capacity of the factory. This results in the Pulp Flash Dryer at Gruvön being burden more, which makes it important that it is of great reliability and can be run with a high capacity. The reliability of the Pulp Flash Dryer at Gruvön is not as good as one could hope, which leads to reduced availability and production, as well as to increased maintenance costs. There are a number of different reasons for this, but all the casual links are not known.The purpose of this project was to perform a system analysis of the Pulp Flash Dryer to identify bottlenecks and the most critical parts from a capacity- and availability perspective. Appropriate methodology for the system analysis was used and would be used in a structured way to perform the analysis with data from the process and the maintenance system.

Background: The demand for sending letters, in the traditional aspect, has decreased because of electronic sources which have replaced a big part of letter communication. The Postal Service constantly strives for lowering costs and due to the changeable demand, a greater awareness is required regarding recourses and their usage. The previously mentioned measures in combination with commonly occurring quality issues during the collective process at the letter terminal in Alvesta would be improved by applying a lean-perspective to the process. A first step towards saving of time is to apply the ?value stream mapping?-method on the collective process for small and large letters.Purpose: To map the process of collection for small and large letters to be able to identify waste of recourses and furthermore give suggestions on how the Postal Service would be able to reduce the waste of recourses identified.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

This thesis analyses the prerequisites, profitability and competitiveness of eucalyptus plantation on the Iberian Peninsula and in Brazil. The thesis has a macro perspective and analyses a typical hectare of eucalyptus in each studied region. A survey methodology was used as a strategy to cover a broad perspective using expert respondents. The regions studied on the Iberian Peninsula were the ones found suitable for eucalyptus plantations from an economic point of view. The studied regions were Huelva in the South West of Spain, Galicia in the North West of Spain and Portugal.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

ABSTRACT. Mastitis is one of the most common diseases affecting dairy cows worldwide. In Sweden annu-ally about 60% of the dairy cows get infected and Staphylococcus aureus cause approximately 30% of these infections. Mastitis causes enormous economic losses. In Sweden, the costs to cure mastitis are estimated to be 192 million SEK per year, excluding the costs for mastitis prevention.

Title AB Volvo Pentas packaging system ?process and packaging logisticsAuthor Peter Powell, Lund's Technical CollegeSupervisors Annika Olsson, Lund's Technical CollegeJan Svensson, AB Volvo PentaProblem - Packaging requirements ? Which requirements are there, how do they affect each other and how are they fulfilled?- Packaging process ? what is the line of action when developing new packaging and making adjustments in existing ones? Who has the responsibility to do what?- Packaging logistics ? How is the packaging system adapted to transport efficiency and handling?Objective To create an overall picture over how the packaging system affects and is affected by different functions and players within and beyond the company boundaries, to give a clear picture of how changes in the packaging system is made today and how it could work and finally to give suggestions for cost savings affected by the packaging system.Method The methods used for this thesis has mainly consisted of action research and at some extent case studies. As a previous employee at the department of logistics at Volvo Penta I?ve taken part of the environment, information and prerequisites that this thesis discusses on a daily basis. Case studies have been used for the collection and analysis of data concerning packaging logistics as I?ve chosen to consider only specific markets and packaging.Conclusions This thesis has highlighted the demands that are placed upon engine packaging throughout all concerned units and how these demands affect each other, positively and negatively.

Problem. With the Swedish public sectors problem with efficiency in mind, several reforms have beeninitiated during the last decades. These reforms go, in academic contexts, under the name?New public management?. The reforms have resulted in, among other things, an increasedcompetition, privatization and goal-orientation in the public sector.

Sweden's aging population makes the need for a viable health care urgent and telemedicine can be a solution to enable older people to receive or give themselves care in their homes. Furthermore, implementation of telemedicine has the potential to realise profits in society by increasing the accessibility of health care and minimizing travel costs. Sweden?s low population density and geographical configuration makes the advantages of telemedicine even more appealing. To illustrate the differences between the county councils? use of telemedicine and thus increasing the possibility for coordinated care between them, the authors have on behalf of the Innovation Centre at the Karolinska University hospital mapped the amount of telemedicine technologies that are available in the Swedish county councils? today. To collect information an electronic survey and video or telephone interviews were used.

Laser for material processing possesses a number of advantages which mean that it has been and will be an important component for a wide range of industries' future development. Cutting materials processing is the dominant use of laser technology and has revolutionized the manufacturing industry. The aim of this thesis is to describe the principles of metal cutting by laser, how laser cutting is applied in practice and to identify how Swedish companies are using laser cutting. For the theoretical and technical description of laser cutting literature studies are the primary source of information. The empirical basis for the mapping of the Swedish industry for laser cutting is grounded on a survey; this includes Swedish companies that use laser cutting in their production.

Problem StatementAfter the hurricane Gudrun in January 2005 EON Elnät Sverige AB started the project KRAFTTAG, were 17,000 km of the airborne power grid shall be replaced with cables underground. The transformers in the airborne power grid shall be dismounted, renovated if necessary and then conveyed to stations, of type kiosk.Additional new transformers, more than planned, have been bought. This is due to the dysfunctional transformer flow from the demolished power supply to projects, were the new power supply is built, the general picture is complicated, since the reconstruction involves other companies and many employees at E.ON.PurposeThe purpose of this master thesis is to map and understand the existing transformer flow. The objective is to make a recommendation on how to increase the level of E.ON? s transformer recycling.Methodthe authors have worked with a system approach, including both qualitative and quantitative data.

Bakgrund: Riksbanken har haft sedelmonopol sedan 1897, vilket har inneburit att de sedan dess har haft ensamrätt att ge ut pengar. Den teknologiska utvecklingen och den ökade användningen av internet har lett till att virtuella samfund har utvecklats och i vissa fall har dessa samhällen skapat sin egen valuta. Bitcoin är världens första helt decentraliserade valuta och baserades i början av sin existens på teknisk nyfikenhet för en handfull hobbyister. Under de senaste åren har efterfrågan på bitcoins ökat vilket i sin tur har lett till att kursen stigit explosivartat.Syfte: Syftet med uppsatsen är att kartlägga och analysera de transaktionskostnader som kan uppstå när Bitcoin används som betalningsmedel, samt jämföra dessa kostnader med de transaktionskostnader som är förenade med användandet av traditionella betalningsmedel.Genomförande: Studien har genomförts genom en blandning av ett kvalitativt och ett kvantitativt tillvägagångssätt samt genom en bearbetning av transaktionskostnadsteorin inom ramen för ny institutionell teori. Empirin består av tre delar där studien inleds med en litteraturstudie för att läsaren ska få en inblick i vad Bitcoin är och hur valutan fungerar.

Several technical solutions are ready to step forward as the new generation of propellant, and this report aims to explore the possibility of commercializing fuel cell cars. The report is based on current research and data from today's technology and engineering solutions that are estimated to be commercially realized before 2020.A mapping of today?s different fuel cell options has shown that the most suitable fuel cell option is the Proton Exchange Membrane Fuel Cell, which uses hydrogen as fuel. The report is focusing on a techno-economic well-to-wheel analysis of hydrogen and the energy balance and costs in a system perspective. The basis for this analysis consists of two centralized methods of production, steam methane reforming (SMR), and alkaline water electrolysis.

Changes in the environment are affecting the world market, and pressures from several stakeholders? are forcing different enterprises to adjust to the current situation. Farmers? difficult working conditions and environmental impacts of the conventional cotton production in India have been highlighted. The small-scale production that is characterising India?s cotton farmers implies an insufficient competition power.

This master thesis was performed as a mission from Holmen Skog with the purpose to investigate to which extent their own machine teams and engaged contractors were exposed to theft and vandalism, and most common preventive measures used. With the help of collected data the study should lead to proposals of preventive measures that can help the machine teams in their struggle to minimise theft and vandalism. Theft and vandalism are a big problem for Swedish forest contractors. In a scarce economic situation thefts and vandalism rapidly decrease the profit for the contractors. However, the last years have resulted in a positive awareness of thefts, and more and better preventive measures have been developed. With the initiative of this master thesis, Holmen Skog show that they are aware of the situation and that they wish to take control of the problem. A total amount of 108 questionnaires was sent out to Holmen?s own machine teams and engaged contractors.