Approximately ten people die every year at building sites in Sweden. Every year TheWork Environment Authority (Arbetsmiljöverket) receives 3200 accident reportsfrom the construction sector. The Swedish building contractor Skanska has the vision:?Zero accidents?. Only at Skanska Sweden, where this diploma work is preformed,350-520 accidents and mishaps are reported every year for the last 5 years.

The main project Dry preservation of food waste from households includes a new technique concerning drying and storage of dried biowaste as well as a study of the sorting of household waste and further usage of the dried biowaste. A question asked in the project is, can the dried biowaste be used as a soil amendment? If organic waste is used as a soil amendment, precaution concerning hygienic safety risks has to be accounted for. The objective of this M. Sc.

Society has seen a tremendous increase in threats, violence and especially unprovoked violence perpetrated by youths. Violence and more seriously unprovoked violence has become a major problem for many service corporations as it gives them bad image and reputation. Corporate Social Responsibility CSR encourages many companies to engage in social activities as they realize that the company is part of the society and the environment. What affects society may sooner or later affect the corporate. For any business to prosper and create a long-term relationship with its customers, it needs a safe environment both for the customers and staff.Feedback from customers and staff is survival and these two (customer and staff) are the most vital assets any firm could have.

In the last decades, high speed cutting has become an attractive technology in the wood industry. The possibility of reducing global costs in addiction with an increase in productivity, were the main reasons for the enlargement of the use of this technology. As usual, these advantages are accompanied by disadvantages that should be carefully analyzed. If on the one hand cutting forces are reduced with increasing cutting speeds, on the other hand, the centrifugal forces affecting the tool are higher. Exposed to such high loads, there is a considerable risk of tool failure that embeds hazards for both machine and workers.

Approximately ten people die every year at building sites in Sweden. Every year TheWork Environment Authority (Arbetsmiljöverket) receives 3200 accident reportsfrom the construction sector. The Swedish building contractor Skanska has the vision:?Zero accidents?. Only at Skanska Sweden, where this diploma work is preformed,350-520 accidents and mishaps are reported every year for the last 5 years.

Aim is to investigate from a criminological perspective how the safety questionnaire in Älvsborg police district can be improved theoretically and methodologically, in order for the questionnaire to effectively measure criminal victimisation, concern about crime, safety and confidence in the police.1. What should a good questionnaire contain?- Which methodological problems are related to measuring criminal victimisation, concern about crime and confidence in the police?- Which criminological theories are interesting in this context and how can questions be designed from these theories?2. How will the themes now represented in the questionnaire be measured in the best possible way? Are there any reasons to remove, The material consists of questions from the safety questionnaire, the total analysis report and individual reports for the local authorities, as well the results and technical information from Mind Research.

These days most companies conduct some form of work for the external environment, quality and safety. In connection with this work, some companies have chosen to get management systems certified by any applicable standard for one or more of the fields while other companies have chosen other ways that are not associated with certification.In light of the fact that the individual systems are becoming unmanageable an increasing number of these companies are faced with the decision whether to integrate and coordinate these different systems or not. In order to study the possibilities of a company?s system coordination an assessment of elements particularly interesting for the company was performed. The key elements and focuses in the evaluation were staff access to information, experiences from other companies and environmental work status for some of the organization's companies.

This essay is about security and safety in the city. More precisely it is concerned about the role of the institutions that aims to raise the perceived security and safety and their understanding of these concepts. I study two of the municipality's project in this field in the city of Malmö. Documents concerning these projects are analysed with a discourse analysis inspired by Chantal Mouffe and Ernesto Laclau as well as Michel Foucault. The two projects consist of one discourse each; the surveillance discourse and the discourse about meetings.

AbstractTrendanalys av rapporterade störningar vid de svenskakärnkraftverkenAnalysis of trends in reported safety-related events atSwedish nuclear power plantsSafdar KargarThis degree project was conducted at the Swedish Radiation Safety Authority (SSM)as part of the bachelors program in Nuclear Engineering at Uppsala University duringthe spring of 2011.The Swedish Radiation Safety Authority (SSM) has developed a Windows baseddatabase called ?ASKEN? during later years. In this database more than 12 000 eventreports are stored sorted in three categories, category 1, 2 and 3. The databasecontains events from the start of Oskarshamn 1 in 1972 till present time.All nuclear power plants in Sweden are obliged to report any deficiency in theirbarriers and/or the defense in depth in obedience to SSMFS 2008:1.When a failure is detected or there is reasonable suspicion of a deficiency, the eventreport should be classified as a deficiency of category -1, 2 or 3 [1].The event reports are logged and archived in the register of SSM. The SSM task forceAnalys av Störningar på elproducerande Kärnkraftverk (the ASK-group), evaluates allincoming event reports and categorizes them according to established criteria.The aim of the project is to study and analyze the event reports in the database andidentity interesting observations and trends which should be investigated morethoroughly by deeper analysis to establish any positive or negative trends of reportedevents. .

Mulesing is a surgical husbandry procedure performed on lambs in Australia. The reason is toprevent severe fly-strike to the breech area, which otherwise risks to be soiled with faeces.This problem is mainly occurring in sheep of the Merino breed. Their fine wool is in demandworldwide due to high quality. Mulesing has been performed since the 1930?s, and eventhough alternative methods have been discussed nothing is yet generally accepted.

The public sector has through the years been exposed to a rather radical alteration. The aim with this alteration has been to make the public sector more effective. It?s a dynamic society that Norrbottens läns landsting (NLL) operates in today and it is therefore of great importance that the managers get a solid foundation to rely on, since they have a central role in the ambition for efficiency. Another reason to educating the managers is that NLL can secure the future pension losses.

This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

AbstractTrendanalys av rapporterade störningar vid de svenskakärnkraftverkenAnalysis of trends in reported safety-related events atSwedish nuclear power plantsSafdar KargarThis degree project was conducted at the Swedish Radiation Safety Authority (SSM)as part of the bachelors program in Nuclear Engineering at Uppsala University duringthe spring of 2011.The Swedish Radiation Safety Authority (SSM) has developed a Windows baseddatabase called ?ASKEN? during later years. In this database more than 12 000 eventreports are stored sorted in three categories, category 1, 2 and 3. The databasecontains events from the start of Oskarshamn 1 in 1972 till present time.All nuclear power plants in Sweden are obliged to report any deficiency in theirbarriers and/or the defense in depth in obedience to SSMFS 2008:1.When a failure is detected or there is reasonable suspicion of a deficiency, the eventreport should be classified as a deficiency of category -1, 2 or 3 [1].The event reports are logged and archived in the register of SSM. The SSM task forceAnalys av Störningar på elproducerande Kärnkraftverk (the ASK-group), evaluates allincoming event reports and categorizes them according to established criteria.The aim of the project is to study and analyze the event reports in the database andidentity interesting observations and trends which should be investigated morethoroughly by deeper analysis to establish any positive or negative trends of reportedevents. .

This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

ITT Flygt is a world leading company that mainly manufactures submersible pumps. A problem of ITT Flygt is that product development projects rarely manage to hold the estimated project time. It shows that something unexpected occurs in projects quite often, which results in delays. The delays can both be due to an optimistic time plan of projects and risks in product development projects which are not discovered at an early stage. This added with unforeseen delays makes it difficult for ITT Flygt to estimate the duration of their projects.The goal with the Master thesis is to examine a suitable method for simulation of project time.