This report is an attempt to clarify how religious and non-religious views-of-life [livsåskådningar] are created through the collaboration and opposition of religious and scientific elements/ideas. This with the hope of reaching a fruitful result related to the solution of world-view related conflicts, such as the ones existing between science and religion, on an individual and societal level.This is accomplished with the help of two assertions: (1) Mankind has a need to explain its existence and surroundings. (2) Religion and science has their origins in the same seed and aim to serve the same purpose, or function. Together these two assertions lay the theoretical foundations of this report which implies that all humans have an innate need of sustaining a stable world-view.The result of this report is that a final solution to world-view related conflicts are beyond reach as our mental and physical nature limits us. However there are strategies for minimizing world-view related conflicts effect on society..

Calculations are an important part of planning around a construction project. From concept to completion of the project calculation is a tool to try to predict the actual cost. During the production stage in particular, deviations occur which makes the actual cost different from the calculations.This thesis is done in collaboration with JM Residential Stockholm. The study includes a cost follow-up in which a comparison was made between the calculated production cost and actual cost for the five projects. The aim of the study was to observe the most common reasons that a project deviates from the calculated production cost and then summing these causes in a number of categories.

The essay describes the bachelor project by Marie Hanås, in collaboration with Skälsö Arkitekter. Skälsö Arkitekter are currently developing an area in the north of Gotland, Bungenäs; previously home to lime stone quarries and military bases.The brief was to design a set of outdoor furniture to complement the new development. The main effort of the project was in designing furniture that would fit the environment visually but construction issues were a major secondary concern, to ensure the easiest possible manufacturing. A reference group of coastal house owners were interviewed, and their feedback, together with an analysis of functions, trends and target groups, were the base for the ideas.Of the five concepts presented, Skälsö Arkitekter chose one to develop further. This was done through sketches, models and 3D models and led to the final result which is lightweight furniture of Gotlandic pine wood with an industrial touch.

I organisationer idag bo?rjar det bli mer och mer centralt att fokusera pa? medarbetarnas innovationsmo?jligheter och kunskap. Organisationer bo?r numera fokusera mer pa? den tysta kunskapen och go?ra denna explicit fo?r att utnyttja den fulla potentialen till innovation. I dagens organisationer kra?vs det a?ven att medarbetarna va?gar arbeta o?ver gra?nserna och att ledningen tydliggo?r att allas input inom organisationen va?rderas likva?rdigt.

This degree project was conducted in collaboration with Gremo AB located in Ätran.The aim of the project was to develop a solution to secure quality and to help assemblingthe locknut holding the vertical hinge on the harvesters and foresters from Gremo.At this time the nut is assembled manually by the aid of an overhead crane. The nut istightened differently from time to time, and there was no specified torque to which it istightened. Another present problem was the locking washer which sometimes getsdamaged during assembly, when this happens the procedure has to be started over fromthe beginning. The current assembly procedure is very time consuming and lengthy forthe employees.Our task was to design a machine that could tighten the nut to a specified torque with amargin of error of ± 3%. The assembly procedure will be held simple and the timerequired at a minimum.The project started by developing several principle solutions, the one solution that bestmatched our specifications were developed to a primary solution.Today we have started manufacturing and assembling our prototype.

This report is about logistic efficiency in companies without own production. The authors have interviewed employees working at two companies, Telias store in Skärholmen and Orion Diagnostica AB. The purpose of the report is to find out which logistic functions the two companies are using to create efficiency.Today?s markets are more global. Different parts of a product can be made in different parts of the world.

Reverse logistics is getting more and more attention both from companies and the public. It is an area with the possibility for companies to do good in the eyes of the public. This work focus on the return system of a one-way handling material called the loading ledge. The loading ledge is developed by IKEA as a substitute for the EUR-pallet in transports from suppliers with a long distance and even flow and in transports from suppliers with short distance and uneven flow. The loading ledge is made out of 100 % recyclable plastic.The purpose of this work is to find the most efficient set-up for recycling of loading ledges within IKEA on a European level from a transport and handling point of view considering aspects like cost, environment, time and, from an administrative point of view, user-friendliness.Who will the participants of the set-up be, where will they be located, which transports are needed and which income and costs does the set-up generate, are questions that will be answered.

During the last decade, the construction industry has focused on improving and optimising its production process. The construction industry is now facing larger changes regarding efficiency in their supply chain for the next decade. Many companies are now trying to optimise its supply chain together with its supplier. JM AB, which is one of the biggest construction companies in Sweden, is looking at different options to improve its own logistics together with their suppliers. One option is to use a terminal between JM and the suppliers to solve problems such as quality, custom service and inventory for the in production.

In 2013 a new emission standard for heavy trucks was introduced and hence a number of new parts was brought in to Scania CV AB. This created a need for modifications in the silencers flow. The flow is highly complex involving several suppliers, call off methods and different models of silencers. The aim for this project was to improve the existing silencers flow. The flow, from supplier to assembling, has therefore been mapped.

This report is an attempt to clarify how religious and non-religious views-of-life [livsåskådningar] are created through the collaboration and opposition of religious and scientific elements/ideas. This with the hope of reaching a fruitful result related to the solution of world-view related conflicts, such as the ones existing between science and religion, on an individual and societal level.This is accomplished with the help of two assertions: (1) Mankind has a need to explain its existence and surroundings. (2) Religion and science has their origins in the same seed and aim to serve the same purpose, or function. Together these two assertions lay the theoretical foundations of this report which implies that all humans have an innate need of sustaining a stable world-view.The result of this report is that a final solution to world-view related conflicts are beyond reach as our mental and physical nature limits us. However there are strategies for minimizing world-view related conflicts effect on society..

Quality can be defined as the ability of a business to satisfy their customers? needs and expectations. Total Quality Management is defined as the way to prevent, appraise and improve the entire organization to increase the product quality. In order to systematically increase quality in an organization, there are different quality systems in use. One example is process management, which is to divide the activities of processes.

The thesis aims to compare differentpiping materials in heating systems interms of cost as well as to illustratethe impact of energy characteristics ofdifferent materials over its servicelife. The methods used for costcalculations regarding piping are alsoto be examined to highlight thedifferences between template basedcalculations and more carefully executedones. The work is delimited to discusspipes of steel, copper, plastics andcomposites. The aim is that the resultcan be compiled to illustrate the prosand cons of various materials whenevaluating investments.The main object of the survey is part ofa heating system in the office-block KVSommaren located in southern Stockholm.The configured piping system is designedwith the mentioned piping materials andis used to make up the data for flow andcost calculations. The differentmaterials are calculated in both aconventional manner with a supplementarycost for additional fittings and with amore accurate quantification of thecomponents.

This research focus on key groups; students with dyslexia, librarians and teachers, and interaction between these two professional groups regarding students with dyslexia. In searching for the exchange of knowledge and experience to meet dyslexic students needs, I have in this study turned the attention to librarians and their experiences with students with dyslexia.The purpose of the research has been through semi-structured qualitative interviews with four librarians, to explore and describe how they experience their work, in working with pupils with severe reading and writing problems, dyslexia, and interaction with teachers on this user group. The qualitative approach in the gathering of the empirical evidence is based on a desire to have an indepth and thoroughly understanding of the librarians experience.All informants in this study indicate that they see it as a natural part of their duty to keep themselves updated about dyslexia and what materials to suit the dyslexic user group. The informants have knowledge of dyslexia and have great knowledge and keep abreast on the latest technology of compensatory aids - alternative tools.The informants have primary a consulting and supply function for teachers and dyslexic students, where they are consulted on  suitable material in both fiction and facts in various disciplines. The informants highlights the importance of planning and preparation time to find suitable material, as audio books or easy read, so students who have a need for this also can be provided.

When contemplating entering an alliance the rationale behind the decision should differ depending on the size of the companies involved as well as on other important factors. The important factors influencing the decision are related to the resource pooling potential of the alliance, the power structure along with the business network the companies are a part of. The analysis has shown proof of a need for cooperation if one wish to succeed in the telecommunication industry and it has also determined which resources that are deemed to be most important to get in touch with, for our study object, to facilitate its access to the market. Those resources are defined as a direct channel to the customer, funds/capital and the access to relevant business networks. To get in touch with these lacking resources, three alternative approaches has been proposed; all of them involving a strategic alliance decision.

With background in the rapidly growing need to find solutions for sustainable energy production and the increasing interest for wind power, this report was written. With take-off point from the wind power plant Big Glenn, which has been built in the harbour of Gothenburg, a model of the adjacent power grid has been created in Simulink/SimPowerSystems. Parameters for the power grid and its components has been provided by Göteborg Energi Nät, that has also been the supplier of measurement data of produced power, the power need from loads in the vicinity, voltage levels, current values and also the variation of power factor at the wind power plant.The SimPowerSystems model has been used to perform simulations of power flow in the grid. These simulated values have then been compared to the measured values to verify the functionality of the model. Further, the model has been used to perform simulations of a grid fault, which causes a voltage drop.