The background of this study is an article in the hunting magazine ?Svensk Jakt? where Karl Hedin claims that his sawmills has not noticed any significant moose damages in the timber. The purpose with the study is to find out the causes to the moose explosion and what it has led to in today?s forests. A questionnaire has been sent out to sawmills in the region Dalarna with the purpose of finding out if sawmills receive moose-damaged timber and what they think about how they foresee future development. There were two causes of the moose explosion, that had effects on the moose population. The first cause was that the moose hunters wanted to raise the moose population, and by raising the calf shooting and by saving the cows they succeeded. The second cause was changing methods in Swedish forestry.

This thesis applies to a novel steam expander, one part of a steam engine system, a wobble plateengine. The piston in the expander moves axially with the outgoing rotating shaft and is locatedon a plate, why the engine type is called axial engine. When steam is applied to the plungers theplate wobbles creating a rotation on the shaft going thru the wobble plate. The steam expander issupposed to be used in exhaust gas recovery (bottoming cycle) applications and small scaleenergy production. The commissioner is Ranotor Utveckling AB.

AbstractThis report describes our ten week long thesis work which is the last task in our education in mechanical engineering at Linköpings University. The project has been performed at Siemens Industrial Turbomachinery AB?s service department. The company which is located in Finspång produces, sells and provides service for steam and gas turbines around the world.The purpose of this project is to help Siemens develop their maintenance programs for two of the auxiliary systems which are a part of the complete steam turbine system. These are lube and control oil systems.The project is restricted to two of Siemens maintenance products, No Stop Check (NSC) and the annual Safety Inspection (SI).

To invent an optimized product is a complicated process. This process is only half of the work. It is equally important to develop a production system that can produce the product in an  efficient and ergonomic way.After several evaluations of conceptual and detailed drawings a final idea has come to light.The idea intends, to the maximum extent, utilize the facility in a more efficient way through moving assembly lines and stations closer to the flock section and the stock for complete products. To make the production better, stations are placed in more logical places given the assignment they are supposed to accomplish. This improves the material flow radically.

The purpose of this report is to study the risk of dust explosions at the candy manufacturing plant Leaf Sverige in Gävle, Sweden. The risk analysis was conducted with a preliminary hazard analysis, PHA and event trees. The analysis focuses only on the risk posed to employees and material damages at the plant. No third person injuries have been considered. Another purpose of this report is to study risk awareness and risk communication concerning dust explosions.

The main purpose of this project was to make a survey of the steam and electricity consumption at Akzo Nobel Functional Chemistry AB and give suggestions of how to minimize them. These three different areas were focused on. First to make a survey of all the most important consumers, second to find the electricity consumption of the air compressors and the amount of waste heat produced from them. The third area was to calculate a model of how much fresh water that is used during a cooling sequence in the water based heating/cooling system of the reactors and give a suggestion of a suitable reuse for this water.The main result is a total survey of the energy consumption in steam and electricity. The survey shows that the second largest group after drying is heating of ventilation which gives big potentials of reducing the total steam consumption if there is a way of being self supporting in ventilation heat.

Åmotfors Bruk AB (ÅBAB) has today an inefficient production of steam for the manufacturing of paper. Unpredictable energy prices and modernisation of the current equipment has been the underlying factors to invest in a thermal power plant, mainly driven by garbage. This facility will not only use the steam for paper production, it will also generate electricity through a steam turbine. Today, when a fault on the supplying line occurs which leads to disconnection of the external grid, all the support of electricity to Åmotfors Bruk (ÅB) will disappear. This will lead to major interruptions in the paper production, which will cause severe economical losses.

The aim of the study was to compare how the population of pine (Pinus sylvestris) and spruce (Picea abies) have changed between 1927 and 2013 in the oak landscape south of Linköping. A field study was carried out in 22 two kilometre lines which also had been studied in 1927. In these lines, which where ten meters broad and had a direction from west to east, the pines and spruces were counted, measured and classified by steam diameter. The obtained result was that the basal steam area (m²/ha) had increased for pine (44%) and spruce (57%) between 1927 and 2013. The amount of trees had increased in all diameter classes except thinner pine and spruce with a diameter of 5-10cm.

Bakgrund: Deep Brain Stimulation (DBS) i nucleus subthalamicus (STN) och i kaudala zona incerta (cZi) har visat positiva effekter på motoriska symtom (rörelseförmåga och balans) vid Parkinsons sjukdom. Efter DBS har dock negativa taleffekter noterats, inklusive nedsatt artikulatorisk precision och stabilitet. Nedsatt artikulatorisk precisionoch stabilitet påverkar klusilproduktionen mest vilket kan resultera i att klusilexplosionen uteblir eller att multipla explosioner uppstår.Mål: Att undersöka artikulatorisk precision och stabilitet vid klusilexplosionen efter DBS i STN respektive cZi.Metod: I studien deltog 19 patienter varav 9 deltagare stimulerats i STN och 10 deltagare i cZi. Talinspelningar gjordes innan operation och ett år efter operation med DBSstimulering på och av. Klusilerna i talmaterialet delades in i tre kategorier, de med en klusilexplosion, de med två eller flera klusilexplosioner samt de utan klusilexplosion.

I alla mjukvaruprojekt spelar mjukvarutestning en viktig roll. Om enprogramdefekt inte upptäcks och rättas innan systemet sätts i produk- tion, kan detta leda till betydande förluster för organisationen.Scanias kunder har möjligheten att skräddarsy sina fordon, efterkundens egna behov, istället för att välja bland en uppsättning färdigamodeller. Denna praktiskt taget oändliga uppsättning teoretiska model- ler medför dock svårigheter inom testning.En elektronisk styrenhet (ECU) är ett inbyggt system som kon- trollerar ett eller ?era av de elektroniska systemen i ett fordon, t.ex.motorn, kraftöverföringen och luftkonditioneringen. När fordonen läm- nar produktionen parametersätts deras ECU-parametrar efter ett regel- verk som anges i kon?gureringsprogrammet Parameter Setting Module(PSM).

Denna rapport behandlar utvecklingen av den spelmotor samt spellogik som används i speletSteam Tale utvecklat under projektnamnet Project Steam Age av gruppen StormBound. Speletutvecklades i första hand för mobila enheter, och i rapporten ingår även en kort undersökningav mobila spel i ett historiskt perspektiv. Även spelets genre, JRPG, en förkortning avJapanese Role Playing Game, kommer att förklaras som hastigast med referenser till andraspel inom genren.Spelet programmerades för Android OS version 2.3 och framåt i språket Java. En avsvårigheterna som påträffades, såsom beskrivs i rapporten, var att säkerställa att speletfungerar för den varierande prestanda som mobila enheter utgör, inklusive aspekter såsommed eller utan hårdvaruacceleration av grafik, varierande mängd lagringsutrymme ochprocessorkärnor samt storlek på skärmar. Därtill bör man vid skapandet av en applikation avdenna typ beakta resurshantering, framförallt beträffande grafik och ljud, ett ämne sombehandlas i denna rapport..

The purpose of this thesis was to make an energy survey and quantify energy flows of individual unit operations associated with the biogas production in Uppsala Vatten och Avfall AB:s biogas plant, located at Kungsängens gård. Moreover, large consumers of energy would be identified and analyzed. The objective of this energy survey was to obtain a detailed understanding of the energy use in the biogas production.The energy survey was divided into two parts: electricity and heat. Each part was treated separately and with somewhat different approach. To estimate the electricity usage during the projcet the rated power of each selected unit operation was noted and multplied with thenmeasured time of usage.

The purpose of this thesis was to make an energy survey and quantify energy flows of individual unit operations associated with the biogas production in Uppsala Vatten och Avfall AB:s biogas plant, located at Kungsängens gård. Moreover, large consumers of energy would be identified and analyzed. The objective of this energy survey was to obtain a detailed understanding of the energy use in the biogas production. The energy survey was divided into two parts: electricity and heat. Each part was treated separately and with somewhat different approach. To estimate the electricity usage during the projcet the rated power of each selected unit operation was noted and multplied with the measured time of usage.

Arvika Fjärrvärme AB, a district heating company from Arvika, today cover 74 % of their total energy production with biofuel wich runs a 16 MW bioler giving process water at saturated liquid state.In recent years Vaporel AB has introduced a new tecnique that gives an external generation of steam after boilers. The concept is built on an adiabatic pressure drop of the saturated liquid in a so called Flashbox which makes a small part of the liquid to evaporate. The generated steam is lead into a turbine where electricity is in a conventional manner.The purpose with this rapport was to do a basic study for the specific system at Arvika where it?s possible to see the potential production of electricity that follows an installation of a flasbox.The final goal was to introduce an economic analysis of a flashox installation at given conditions.To reach our goals we have created a model in Excel where we used the given conditions at Arvika Fjärrvärme to do our calculations. The model has been tested at three different states, of process water returning to potboiler, to be able to decide the optimal operation for the system at present.The studies have resulted in a pressure of the processwater at 14,5 bar (at) and a pressuredrop to 9,5 bar (at) in the flashbox.

 This degree project aims at developing a concept for how to use solar energy to pump up water. The target audience is people living in areas where the functioning of the electricity and water network is absent. In these areas, the hand-powered water pump is the most common technology. The degree project's goal is to find an economically viable alternative to the time consuming hand-powered water pumps. The power comes from solar energy.