Steam was used as a site preparation method to eliminate unwanted bilberry (Vaccinium myrtillus L.) in the boreal forest. The efficiency of steam to suppress bilberry was compared with prescribed burning and cutting the bilberry. Different combinations of steaming and/or cutting the bilberry were set up to investigate in which way steaming and cutting influenced the sprouting and regrowth of bilberry. The regrowth of the bilberry vegetation was monitored for 40 month. Steam was most efficient in suppressing bilberry.

EU har som mål att år 2020 ha minskat utsläppen av växthusgaser med 20 % och ökat andelen förnyelsebar energi till 20 %. I Sverige är andelen fossilt bränsle som förbränns ca 30 %. Denna studie syftar till att utreda om termokemiskt behandlade biobränslen kan ersätta de kommersiella fossila bränslena. Resultatet har nåtts med simulering i programvaran Fuelsim och insamling av experimentella data.  En simulering ska påvisa om syreberikning gynnar bränslena och experimentella data används för att se vilka problem som finns för respektive bränsle.

The purpose of the project was to exam steams ability to sterilize carrots infected withLactobacillus plantarum. The project was a cowork with Brämhults Juice AB. They hadobserved an increase of Lactobacillus in the production of carrot juice during the summer. Tokeep the flavour of fresh fruits, the juice is treated carefully with heat. This means that thejuice only stays fresh for a few days, around two weeks for an unopened package and threedays for an opened package.In an attempt to remove the remaining Lactobacillus of the carrots, steam is tested as an extrastep in the production of juice.

Aerated steam treatment is a modern and environmental friendly method for seed borne fungus sanitation, mainly used on cereals. The method involves exposure to heat and high humidity, factors which are known to induce a fast ageing of seeds, thus resulting in reduced storability. This thesis clarifies the interdependence between seed age and the aerated steam treatment intensities. Two studies were carried out in this thesis. In the first study the storage longevity of seeds treated with aerated steam was examined. The second study investigated the shelf-life of the pre-tests used to determine the aerated steam treatment tolerance of a seed lot, by testing the treatment tolerance of seeds aged prior to the treatment.

Bioethanol is one alternative energy fuel that can be produced from different types of biomass. Second generation bioethanol comes from fermentation of lignocellulosic material and can be seen as a more environmental friendly alternative as e.g. forest residues and agricultural by-products are used. To be able to use lignocellulosic biomass in ethanol production, it has to be subjected to different treatments first. In this study, aspen sawdust was used as lignocellulosic material.

Internet och sociala medier har lett till att användare har fått möjligheter att dela med sig av information som i sin tur får representera dem i de olika virtuella miljöerna. Bland annat finns Steam som är en spelplattform med möjlighet att skapa samt ändra användarprofiler. Men varför väljer aktiva användare av Steam som har ändrat sin användarprofil att ändra den?Efter en enkätundersökning med svar från 50 deltagande skapades en uppfattning om användares valmöjligheter samt användning av olika funktioner som tillät användare dela med sig av information om sig själva via Steam. Därefter anordnades semistrukturerade intervjuer där deltagares svar ledde till diskussion kring olika begrepp som skulle kunna förklara anledningar till användandet av funktionerna på användarprofilerna.Resultaten i denna studie visade att de olika begrepp som beskriver varför användare väljer att ändra sina profiler är virtuell identitet, anonymitet och socialt kapital.

Vattenfall Heat Uppsala runs the waste incineration plant in Uppsala, which produces district heating, process steam, district cooling and electricity. Vattenfall Heat Uppsala has decided to introduce an energy management system with the aim to increase the energy efficiency of the plant. The basis in such a system is to make an energy mapping.In this thesis an energy mapping has been performed at the waste incineration plant with the aim to identify and determine the size of energy flows. The investigated energy flows are used fuel, produced and used steam, produced district heating and cooling. Also the use of electricity to run the processes has been investigated.

The actual project presents the development of a testing rig for a steam engine. A short overviewabout the development of steam engines is presented, until arriving to the development of thepresent engine, which will require to be tested in different ways.The testing rig studied on this project (based on a Lanchester engine) will be used to testdifferent materials and layouts for the group Piston-Cylinder.The engine is a high performance steam power engine, which is going to have a highpower/dimensions ratio, what will lead to require high performance components and materials.An introduction to the testing rig is presented, and the entire design project is done in order toreplace the disappeared documentation of the current testing rig, built on the 1970?s. Also somemodifications done in the original testing rig are presented, as well as some detected problemsand their possible solutions..

This report is the result of a thesis work in Integrated Product Development, regarding hygienic features in dishwashers and especially disinfection by the use of steam.The thesis is performed at Electrolux Primary Development Dishcare in Stockholm and in collaboration with the Department of Machine Design at the Royal Institute of Technology.The targets of the thesis are to prove the advantages of a technology suitable to implement as a hygienic feature inside a dishwasher and to realize a functional prototype of a differentiated hygienic feature that does not exist on the market today.The process followed to perform the thesis is the process defined for Electrolux Primary Development.The technology chosen for development is disinfection by heating the water on the surface of the dishware, by the use of steam.A number of tests on how steam behaves when injected into the dishwasher tub have been performed, providing the results that have been taken in consideration when designing the prototype.The prototype consists of a pipe system provided with nozzles to eject the steam into the upper parts of the dishwasher. Tests of the final prototype show that thermal disinfection of water in a dedicated area of the tub can be reached within 9 minutes. The operation requires 0,17 liters of water and consumes 0.2kWh..

This report summarize what have been done during the Master of Science Thesis that Klas Schjelderup has written for the company RANOTOR Utvecklings AB. The company is developing modern steam engines and this work should develop a machine to perform tests on a new type of piston seal that hopefully could be used in the future. The steam engines will be both volumetric and energy compact, around 1600hp/literof cylinder volume, and it will have a lot of practical applications.The new type of piston seal is hydrostatic lubricated which means that a fluid is separating two faces that normally is in contact. In this case pressurized water is used to separate the piston seal from the cylinder wall. RANOTOR have earlier formulated that at least the expander in the modern steam engine have to be oil-free, due to other components functionality in the closed water system.

In this report I will describe how an art-directed fluid effect for motion picture can be achieved. This effect will be an explosion with a visual style that is congruent with Pixar's movie Up. To begin with I will analyze the visual components that are used in Up and control the fluid simulation to get the desired visual style. I will briefly explain the background of my thesis, why it is interesting to create designed effects and why it is hard to design fluid effects. In the method I will explain my work process and some of the challenges that arises.

In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

The background of this study is an article in the hunting magazine ?Svensk Jakt? where Karl Hedin claims that his sawmills has not noticed any significant moose damages in the timber. The purpose with the study is to find out the causes to the moose explosion and what it has led to in today?s forests. A questionnaire has been sent out to sawmills in the region Dalarna with the purpose of finding out if sawmills receive moose-damaged timber and what they think about how they foresee future development. There were two causes of the moose explosion, that had effects on the moose population. The first cause was that the moose hunters wanted to raise the moose population, and by raising the calf shooting and by saving the cows they succeeded. The second cause was changing methods in Swedish forestry.

The background of this study is an article in the hunting magazine ?Svensk Jakt? where Karl Hedin claims that his sawmills has not noticed any significant moose damages in the timber. The purpose with the study is to find out the causes to the moose explosion and what it has led to in today?s forests. A questionnaire has been sent out to sawmills in the region Dalarna with the purpose of finding out if sawmills receive moose-damaged timber and what they think about how they foresee future development. There were two causes of the moose explosion, that had effects on the moose population. The first cause was that the moose hunters wanted to raise the moose population, and by raising the calf shooting and by saving the cows they succeeded. The second cause was changing methods in Swedish forestry.