Prisons are for many an unknown world, and few know about the prison culture which includes unwritten rules, power structures, interactions and relationships between inmates and correctional employees.While many think that Swedish prisons are too comfortable,inmates are facing extreme stress due to surveillance and detention, by depriving inmates their possibility to shape their own lives. When the inmates is deprived of control over their own life?s the penal system have great power to shape and to influence the inmates.The purpose of this paper is to investigate prisoners' experiences of treatment and exercise of power in prisons. Starting point is to examine what are the kinds of relationships between prison officers and inmates from a power perspective, if there is any difference between the closed and open prisons and how the inmates affected by the structures that exist.Based on my overall purpose, and with my informant´s stories which revealed a number of similar points, four main headings were developed; Mass media and society´s view, and unknown world, interaction between inmates and prison officers and consequences.Prison officers with the role as a contact persons as well and other staff which work close to the inmates play a significant role by supporting through motivational interviewing and can help the inmates to gain insight about their life situation and actions. My informant?s underlined that a good contact person can either help or discourage.Inmates who contributed with their experiences express that there is a big difference between open-and closed prisons.

I?ve tried to find the most effective and cost effective way to harvest straw for energy recovery.You can choose between round bales and big square bales. Square bales are the cheapest way to produce straw for fuel recovery because you can optimize the length of the bales so they fit the transportation equipment.In the Malmö area the average days of harvesting hay is 55. The effectively of transportation depends mostly of the speed, the distance and density of the bales. To increase the capacity of bale transportation larger loads and higher density of the bales is necessary.

It has been observed by both onion producers and a plant protection advisor on Öland (an island off the east coast of Sweden) that basal rot is the largest contributory factor to reduced onion quality and yield. Basal rot is mainly caused by species of Fusarium fungi. The aim of this study was to: a) investigate which species of Fusarium that can be found in onion produced on Öland, b) describe the symptoms caused by the different Fusarium fungi found and c) explore, through interviews with the onion producers on Öland, the mechanisms that may be involved in the observed increase in basal rot.Onion bulbs (Allium cepa) were sampled on two occasions. In total 181 onions from 11 different fields were analysed. In addition, eight onion producers were interviewed.

Prisons are for many an unknown world, and few know about the prison culture which includes unwritten rules, power structures, interactions and relationships between inmates and correctional employees.While many think that Swedish prisons are too comfortable,inmates are facing extreme stress due to surveillance and detention, by depriving inmates their possibility to shape their own lives. When the inmates is deprived of control over their own life?s the penal system have great power to shape and to influence the inmates.The purpose of this paper is to investigate prisoners' experiences of treatment and exercise of power in prisons. Starting point is to examine what are the kinds of relationships between prison officers and inmates from a power perspective, if there is any difference between the closed and open prisons and how the inmates affected by the structures that exist.Based on my overall purpose, and with my informant´s stories which revealed a number of similar points, four main headings were developed; Mass media and society´s view, and unknown world, interaction between inmates and prison officers and consequences.Prison officers with the role as a contact persons as well and other staff which work close to the inmates play a significant role by supporting through motivational interviewing and can help the inmates to gain insight about their life situation and actions. My informant?s underlined that a good contact person can either help or discourage.Inmates who contributed with their experiences express that there is a big difference between open-and closed prisons.

SAMMANFATTNING Uppskattningsvis transporteras 171 miljoner grisar inom EU varje år, varav ca 3,5 miljoner i Sverige. Grisarna kommer, under hela förloppet från förflyttningen från box i stallet till bedövningen i slakteriet, att utsättas för stressande moment. Orsakerna är bland annat omgrupperingar, nya miljöer, vibrationer i bilen samt, speciellt under sommaren, värmestress. Temperaturen i djurtransportbilen är en nyckelfaktor som dessutom kan förstärka effekten av andra stressorer. Lastning i höga temperaturer ökar risken för värmestress. Värmestress innebär att djuren får allt svårare att avge sin värme. Även den relativa luftfuktigheten har betydelse, framförallt vid temperaturer över 30°C. Det är ventilationen i transportbilen som ska transportera bort värme och fukt från bilen.

Water is vital for all life on earth. But it can also be dangerous, even fatal, if it is polluted water. 60 percent of child mortality can directly be deduced to dirty water. Not only developing countries are affected, even in the western world epidemics are breaking out by partake or bathing in dirty/polluted water.MIP, Molecularly Imprinted Polymers, is a biosensor technology that can provide faster and more reliable response than the current methods of water analysis. It is also cheaper and due to that more samples can be taken and analyzed.

ÅF Test Center in Borlänge had a need to expand their capacity for compressive and tensile strength tests. They wanted to do this by using a hydraulic cylinder, which they already possessed, to apply the force with. This required a load receiving structure. The aim of this work was to design and dimensioning a test bench for a cylinder marked NIKE 300 tons. The work would result in a completed design proposal on a test bench which could manage to run the compressive and tensile strength tests of up to 3000 kN.

The focus of this project was to characterize the occurrence of ESBL-­?producing bacteria in two irrigation water ponds in Southern Sweden. Samples were taken from two ponds nearby each other, from which analyses were made based on levels of community and individual isolates. Community samples were used for attempts for characterization of resistance patterns in irrigation water using the Omnilog PM-­?plate system. The growth of community microbiota in the presence of the following antibiotic substances was assessed; amikacin, gentamicin, kanamycin, penicillin G, ampicillin, piperacillin, trimethoprim, potassium tellurite and ciprofloxacin. Isolates were pure cultured using semi-­?selective media: LB, Rainbow Agar, mEnterococcus, 0.1 TSA and VRBD. A total of 177 isolates were isolated randomly. Each isolate was identified using the Omnilog GENIII-­?system of biochemical characterization. Further, the isolates were tested on Brilliance ESBL-­?agar for their ability to grow. Out of the total number of isolates, 30 were selected, preferably Enterobacteriaceae or Pseudomonas spp., based on their high similarity to library strain during the identification in the Omnilog-­?system. These were further characterized using Etest-­?sticks. Three selected strains were picked for further analyses using exogenous isolation for attempts to simulate horizontal gene transfer, and Omnilog PM-­?panels containing various antibiotics of interest. Selections of samples were chosen for molecular tests targeting plasmid-­?borne resistance genes CTX-­?M1, CTX-­?M2 and SHV. The method for assessing community-­?resistance patterns showed ambiguous data that was difficult to interpret; further optimization is recommended. For all tested PM-­?plates, generally greatest differences between substances were found among wells with the strongest concentration of antibiotic substance. A total of 175 isolates displayed ability to grow on ESBL-­?agar. Etests confirmed ability of isolates to resist many ?-­?lactam antibiotics and many were clinically resistant to certain substances. No plasmids were transferred during exogenous isolation. During molecular tests, a few matches were found for the CTX-­?M1 gene. Isolates analyzed with Omnilog PM-­?plates showed resistance to most compounds tested. The isolates showed greatest resistance toward penicillin G, ampicillin, amikacin, kanamycin and trimethoprim. In the study, it was established that resistance among bacteria was frequently occurring in the irrigation water, and ?-­?lactamase producing bacteria was very common. Extended studies are needed to assess the frequency-­? and occurrence of horizontal gene transfer (HGF) in this environment. Although some potential corresponding data is found, it is at this point not possible to determine whether the resistances are due to antibiotics used in veterinary medicine, human medicine or one additional reason is travel and trade. in irrigation water using the Omnilog PM-­?plate system. The growth of community microbiota in the presence of the following antibiotic substances was assessed; amikacin, gentamicin, kanamycin, penicillin G, ampicillin, piperacillin, trimethoprim, potassium tellurite and ciprofloxacin. Isolates were pure cultured using semi-­?selective media: LB, Rainbow Agar, mEnterococcus, 0.1 TSA and VRBD. A total of 177 isolates were isolated randomly. Each isolate was identified using the Omnilog GENIII-­?system of biochemical characterization. Further, the isolates were tested on Brilliance ESBL-­?agar for their ability to grow. Out of the total number of isolates, 30 were selected, preferably Enterobacteriaceae or Pseudomonas spp., based on their high similarity to library strain during the identification in the Omnilog-­?system. These were further characterized using Etest-­?sticks. Three selected strains were picked for further analyses using exogenous isolation for attempts to simulate horizontal gene transfer, and Omnilog PM-­?panels containing various antibiotics of interest. Selections of samples were chosen for molecular tests targeting plasmid-­?borne resistance genes CTX-­?M1, CTX-­?M2 and SHV. The method for assessing community-­?resistance patterns showed ambiguous data that was difficult to interpret; further optimization is recommended. For all tested PM-­?plates, generally greatest differences between substances were found among wells with the strongest concentration of antibiotic substance. A total of 175 isolates displayed ability to grow on ESBL-­?agar. Etests confirmed ability of isolates to resist many ?-­?lactam antibiotics and many were clinically resistant to certain substances. No plasmids were transferred during exogenous isolation. During molecular tests, a few matches were found for the CTX-­?M1 gene. Isolates analyzed with Omnilog PM-­?plates showed resistance to most compounds tested. The isolates showed greatest resistance toward penicillin G, ampicillin, amikacin, kanamycin and trimethoprim. In the study, it was established that resistance among bacteria was frequently occurring in the irrigation water, and ?-­?lactamase producing bacteria was very common. Extended studies are needed to assess the frequency-­? and occurrence of horizontal gene transfer (HGF) in this environment. Although some potential corresponding data is found, it is at this point not possible to determine whether the resistances are due to antibiotics used in veterinary medicine, human medicine or one additional reason is travel and trade..

This thesis of 15 hp has been implemented at Halmstad University, incollaboration with Saab Dynamics in Linköping. Saab Dynamics is a companyoperating in the defence industry where competition is tough. This necessitatesnew ways to increase efficiency in the company, which is the basis for this thesis.Saab Dynamics wants to introduce simulation driven design. Since SaabDynamics engineers have little experience of simulation, required a usermethodology with clear guidelines. Due to lack of time, they chose to assign thetask to students, which resulted in this thesis.The aim of the thesis is to develop a methodology in mechanical design, wherethe designer uses the FE analysis early in the design process to develop thestructures' mechanical properties.

Syskonbädd, or ?Sibling?s bed? in English, is a short story or drama, written by Swedish author Stina Aronson and originally published in 1931 under the pen name Sara Sand. While the story did not attract wide attention for many years, it has recently been republished and performed on stage, as well as aired on the radio. The plot is centered on Harriet, a woman who starts to see the world with different eyes, in a less strict and organized way. Her new view is welcomed neither by her husband nor society, and the book starts with Harriet?s escape from a ?rest home?, where she has been placed by her husband in order for her to return to her old self.

In the assembly process of airframe structures there are many drilled holes and on some parts the holes are mainly drilled manually with pneumatic handheld drilling machines. During conventional drilling in metal, burrs appear. To remove these burrs the parts of the structure must be separated and deburred before they can be put together for fastening. This is a time consuming measure and therefore expensive. To facilitate this process and lower production costs some parts of the process needs to be automated.A part of this thesis was a project in co-operation with Saab, Novator, Specma Automation and the University of Linköping.

Due to global climate change and the rising levels of greenhouse gases (GHG) in the atmosphere, the interest for seeking solutions for mitigation has increased. While much attention has been directed towards technical solutions such as carbon capture and storage (CCS), biogenic carbon sinks has also garnered significant attention. Previous studies have shown that coastal ecosystems such as seagrass meadows and mangroves have a much greater capacity for storing carbon (C) compared to terrestrial ecosystems. That raises the question if other coastal ecosystems, such as coastal wetland forests, that previously haven?t been considered as blue carbon habitats also contribute to coastal carbon sink capacity.

When referring to the same event, people can have different assumptions. What is interesting to see is why these assumptions are different, why do people have different stories? Some of the reasons could be different levels of expectation, different communication channels or even different cultural backgrounds. We have analysed all these by having a case study within a company that has recently gone through a change management/strategy implementation process.The research reviewed in this paper originates in two different worlds. One world is a research world where stories come from textbooks and articles.

The interest in horses and equestrian sport is constantly increasing, and so is the will in both riders and trainers to learn more about the effect the rider and its equipment have on the horse. The last twenty years, more and more studies have been performed were the horse and its kinematics have been in focus. The access to more advanced technology has made it possible to study areas, which earlier have been hard to reach. The knowledge about kinematics in the horse, and how riders and their equipment interact with the horse?s movement, is also of great interest to veterinarians in equine practice.

IRB 340, Flexpicker is an industrial robot used for sorting, packaging and the handling of details up to two kg. The Flexpicker is a delta robot, meaning that it with three arms controls a triangular plate, swivel, in a work area shaped like a cylinder. Joints using plain bearings connect the arms.The plain bearing in use today consists of a plastic ring which slides against a hard anodized joint ball. Despite the fact that the plastic contain friction-lowering additives, the bearing needs to be lubricated to prevent noise. Because the robot is used in food and drug handling environments, where the demands on hygiene are set very high, the robot is often washed.