Detta arbete grundar sig på en befintlig ritning projekterad av Arkinova Arkitekter och uppfyller normal tillgänglighetsnivå. Ritningen består av ett lägenhetsplan med fem lägenheter vilka har en boarea mellan 36-64 m2. I detta arbete omprojekterades dessa lägenheter till höjd tillgänglighetsnivå enligt SS med avsikt att förbättra tillgängligheten för funktionshindrade grupper. Omprojekteringen utfördes med hjälp av BIM-programmet Revit Architecture 2013 med utgångspunkt från standarderna,           SS 91 42 21:2006 samt SS 91 42 22:2006, vilka utgör underlag för projektering av bostäder.       Syftet med denna studie var att utreda de merkostnader som är förknippade med en tillgänglighetsökning, dessa merkostnader beräknades i kalkylprogrammet BidCon.Resultatet visade att för att uppfylla SS rekommendationer kring ökad tillgänglighet, var en ökning av bruttoarean med 84 m2 i den ursprungliga ritningen oundviklig. Detta innebar en total ökning av bruttoarean med 25 %, vilket resulterade i merkostnader som uppgick till  126 014 SEK för lägenhetsplanet i höjd nivå.

The purpose of this study was to examine how a selection of social welfare officers based on the principle of the best interest of the child construct a minimum level of the material standard in a home. Another purpose was to examine whether different units with varying socioeconomic prerequisites in the municipality of Stockholm construct this level differently.The method used in this study was Sociology of Law and two focus groups were used for the gathering of the data. A social constructive theory, a class perspective using concepts of Bourdieu and a perspective of law were used to analyse the material of data.The results showed that the courses of action varied from enactment and the policies of the municipality of Stockholm, unspecified theories of the development of children, the conception of what is normal and what children needs, the context in which they work, the development of the society and what they estimate that children needs when attending school. The results also showed a difference between the two units concerning the minimum level of the material standard in a home.

This thesis analyses the cost accounting system KPP and its use within the Swedish health care. KPP is designed to calculate and assign health care costs to individual patients. This would facilitate evaluations and comparisons of the costs for certain diagnosis, patient groups or clinics with a different mix of diagnosis. The study investigates the following questions: 1. Does the KPP-model theoretically work as a cost accounting tool for health care purposes? 2.

Tomo Hugglink (TOMO Skog) is an innovation for harvest and transport of biofuels. The system consists of a truck, a chipping unit and crane mounted on a link and a wood chip trailer. The system works in such a way that the chipping unit is disconnected and placed on the site and wood chips are loaded directly into the wood chip trailer.The aim of this study was:- To examine the performance of the TOMO Hugglink system under different conditions such as the size, placement and quality of the pile.- To calculate the cost per raw ton for two vehicle combinations at different transport distances and to examine the effect of a reduction in set-up time and an increase in load weight.- To identify possible improvements with the TOMO Hugglink system.A time study was conducted within the thesis work to make it possible to determine production and time consumption. In the subsequent economic analysis the cost per tone at different transport distances was calculated for two different lorry concepts. Furthermore the effect of a reduction in set-up time and an increase in load weight was calculated.Under current conditions the utilization of the chipper is low and only 29 % of the total system time is occupied by chipping.

Title: The component approach - From the harmonization process as a background to the perception of benefits and costs as effects.Authors: Elin Börjesson & Emma KarlssonTutor: Titti EliassonKey concept: Harmonization, Component approach and Benefit/CostBackground: With IFRS for SME's as a basis, the Accounting Board developed K3 which shall apply from financial year 2014. Upon introduction of the K3 companies will be forced to apply the component approach. When K3 with the associated component approach went out for consultation it resulted in a debate where some actors opposed the imposition of a requirement and not an option. It was questioned whether the costs with the component approach would be greater than the benefit of the implementation.Formulation of the problem: How is the introduction and use of the component approach seen by different operators from a benefit-, cost perspective?Aim: The aim of this essay is find out how the introduction and use of the component approach is seen by different operators from a benefit-, cost perspective.

Hypoadrenocorticism (Addison´s disease) results from insufficient production of glucocorticoid and mineralcorticoid hormones from the adrenal glands. The disease is often difficult to diagnose in an early stage because of the multitude of associated vague clinical signs. The standard poodle is one breed presupposed to be at higher risk of developing the disease. The purpose of this study was to give a review of canine hypoadrenocorticism as described in literature, and to characterise Addison´s disease in a population of standard poodles in Sweden. Statistics on incidenceproportions by breed for hypoadrenocorticism from the database of the Swedish insurance company Agria are presented.

With the elevated oil prices of today it is necessary to look for other heating alternatives. If the oil price continues to develop in the same way it has done the last years it will soon be impossible for many producing garden companies to survive. The purpose of this diploma work is to compare three different fuel options in order to find the most economic one considering the conditions of Katrinebergs Handelsträdgård AB. In relation to oil it is profitable to change to any of the three alternatives: wood chips, wood pellets and grain. The most profitable option is to change to wood chips. This alternative has a payoff time less than three years and after that the annual saving compared to the oil is relatively high. The annual cost is 65 % of the cost of the oil alternative.

Since 1996 the Swedish households have ten folded their volume of loans for own homes that is attached to a floating interest rate. Also in 1996 the Swedish electric market was deregulated. These two facts have increased the volatility in the household expenses for these two commodities. This thesis studies the risk for homeowners attached to the exposure against the electric and the credit market. The risk model used is Cost-at-Risk which is usually used by public authorities for analysing the risk involved with national debt.

As IT service departments in organisations are becoming more complex and customised, the indirect costs are increasing in relation to the total costs. The difficulty of fully estimating and identifying the spread of the cost in the IT service department is increasing. As a result, firms tend to budget the business unit as a total cost rather than as a spread of defined costs. In order to deal with this challenge an ABC calculation will be applied. The Time Driven ABC model will be conducted in OMX´s Servicedesk unit within the IT services.

Syftet med studien var att undersöka huruvida utsattheten för ?sunk cost-effect? och förankringseffekten ökade vid intuitivt processande jämfört med analytiskt processande. Deltagarna i studien var 78 studedenter vid psykologiska institutionen vid Göteborgs Universitet. Datainsamlingen gjordes genom en pappersenkät. En 2 × 2 - vägs ANOVA avseende bias och process gjordes för både ?sunk cost effect? och förankringseffekten i en mellanindividdesign.

The purpose of this study is to survey and evaluate if the individual contrast sensitivity and preferences for horizontal and vertical lighting level correspond to the values that standard SS-EN 12464-1 recommends for the workplace- and surrounding light levels.This study examines if lighting should be adapted after the individuals? need or if a general value can be found that will cover every individuals? need for a workplace and surrounding light level. This study also examines if parameters like sex, age and/or glasses/lenses have an effect on the amount of lighting that the test subjects need. Lastly we compared the values concerning the relationship between workplace- and surrounding light levels with standard SS-EN 12464-1?s recommendations.The study is carried out with an experimental design that surveys 220 test subjects who were chosen by a selection of convenience.

The aim of this study was to investigate how the process of implementing a quality management system for food safety was handled in four different food producing companies in Sweden. The aim was also to analyze what difficulties the companies face and the possibilities that arise when certified. Furthermore, the reason for implementation was discussed as well as the main expectations on the certificate. Implementing a quality management system is a good way of ensuring the quality and hygiene of the food production and it also increases the traceability of food products through the whole food chain. A food safety standard provides a method of preventing problems and crisis and it can also help to handle requirements from authorities, the market and others.

For a company to get the best possible profitability, requires financial planning. Budgeting isa common tool in financial planning. For operating lamb producers, a planning program suchas Agriwise is a good tool. Individual lamb producers may change certain standard figureswithin the planning program to better correspond with reality of the individual cases. In thisway, lamb producers may plan according to which revenues and costs they may expect thenext period.

Government regulations and customs duties restrict the import of trucks to some of the markets to which Scania tries to sell their trucks. The distribution problem due to these regulations is solved by the foreign assembly department, KD, at Scania. This means that competence is needed and costs are added not related to Scania's core operations.The aim of this master thesis has been to analyse and to evaluate alternative ways of managing the packing operations considering cost, quality and work organisation. To study and examine the work methods and operations of today and also to present methods measuring the operations effectiveness and productivity.We have used the system approach to maintain totality and to understand the component's relation to this totality. Field studies combined with studies of relevant literature and studies of other companies operations have given us the knowledge and the understanding of the packing operations needed.

This report deals with the attitudes within municipalities of open source software and open standards and if open source software may be an option to gain open standards. The aim has been to find out if open source software and open standards would be able to solve the lock-in problems that municipalities have against proprietary software. The study is conducted as an exploratory, inductive and qualitative study with depth interviews of subjectively selected informants as data collection method. A literature review has also been implemented by the relevant books and articles. Some economic determinants of municipalities to make use of open source software have not been considered in this study.