The purpose of this report is to compile and examine the cost of renovation of moisture-damaged bathrooms, to derive a target price. The target price can then be used by insurance companies to estimate the ultimate cost of future bathroom renovations.       The method is based on the compilation and comparison of the cost of repairs of previous water damage in bathrooms. The calculations compiled based on repair estimates for different insurance losses from one of the leading insurance companies in Sweden.       The result shows the average price per square meter of floor area for different sizes of bathrooms. The average price is the basis for the estimate of future renovation costs of bathrooms. The results further show that the bathroom finishes, area and the distance between the entrepreneur and the location of the renovation have great impact on the final repairing cost.

Denna uppsats behandlar ämnet Försvarsmaktens Fysiska Standard. Uppsatsens syfte är att skapa ett underlag för att förbättra eller bibehålla möjligheterna för officerarna vid Artilleriregementet A9 att genomföra Försvarsmaktens Fysiska Standard (FM FysS). Detta för att uppfylla de krav som ställs avseende fysisk prestationsförmåga på en officer i Försvarsmakten. Den frågeställning som använts är Hur uppfattar officerarna på A9 att de genomför FM FysS?Den metod som använts är en enkätundersökning som genomförts bland officerarna på A9.Resultatet från enkätundersökningen visar att det finns både positiva delar som bör bibehållas och förbättringspunkter för genomförandet av FM FysS.

Swedish studies have shown that more people than expected have problems with leg ulcers and that the yearly cost for treatment per patient is approximately 26 500kr. Since the elderly population is on the rise, there is a need to highlight this growing problem, to make sure that proper assessment tools are used and to improve the standard of care given to patients with leg ulcers. The aim was to show what a difference the nurse can make to patients with leg ulcers. With all types of wounds it is imperative to establish if there is any underlying reasons since certain illnesses can cause more wounds or delay the healing process. The doctor is responsible for making the diagnosis and to prescribe the correct treatment whereas the nurse?s responsibility is for the nursing care and its documentation.

A study has been conducted on how organizations in Sweden administer costs of facilities management services internally. There are three main theoretical methods for administering costs. In the first method, costs are maintained on a central level; in the second method, costs are allocated and in the third method, internal transfer pricing is used. The aim of the study is to identify which methods are applied in practice, to evaluate whether the methods fulfill their intended purposes and to study the relationship between the methods used and the cost level of facilites management services. In practice, a large diversity of methods are used for facilities management costs.

Bostadsbristen för unga växer i takt med att fler byggherrar avstår från att bygga små lägenheter, då rådande lagar gör det svårt att på ett gynnsamt sätt producera kostnads- och yteffektiva bostäder. Bostäder har i dag krav på sig från kommuner och beställare att uppfylla svensk standard. Däri har handikapporganisationer drivit fram tillgänglighetskrav som medför att alla nyproducerade bostäder är tillgänglighetsanpassade.Genom att ifrågasätta svensk funktionshinderspolitik i samband med bostadsbyggande har detta examensarbete som mål att hitta lösningar för att öka nyproduktionen av små bostäder. Granskningen resulterade i ett förslag till en ny standard för ungdoms- och studentbostäder vilken underlättar vid projektering av mindre enskilda bostadslägenheter..

SECO Tools manufactures tool inserts for all types of metal cutting machining. (Ti,W)C is a common raw material used in the production. At arrival, the material (Ti,W)C is always analyzed. Titanium has previously been analysed with x-ray fluorescence spectrometry, but as the calibration has previously been performed with two different types of titanium (rutile and metallic titanium), the results has differed. Because of that, this thesis project has been devoted to analyze titanium, to find the best titanium compound for producing standards.The work has been performed using literature studies and many experiments in the laboratories at SECO Tools inFagersta,Sweden.

The enterprises of today are beginning to realize that environmental issues are a important part of their activity. Companies and organizations are expected to a greater extent communicate their environmental work to the world surrounding them in a trustworthy and structured way. Lack of information or information that is incorrect may bring farreaching consequences. Communication is mentioned in several of the ISO 14001-standards. But what is missing is a guideline how companies should act to create and be sure of the quality of the data that can be used in the environmental communication.

Purpose ? The purpose of this thesis is to develop a total cost model for container transports and create a tool that calculates a suitable transport quantity from an economic view, which fulfills the demands on delivery service. To achieve this purpose the following questions will be answered:Which costs are affected by the decision between the two transport alternatives LCL and FCL?   How does the decision of sending product LCL or FCL influence the delivery service?  How can a tool be constructed to simplify the decision-making process regarding the choice of sending products LCL or FCL?  Method ? A total cost model was developed. This model is supported from existing literature.

There are regulations in sweden that require organizations to manage occupational,  health and safetey (OH&S) issues in a systematic way. The contents of the management system vary depending of the activity of the specific organisation. An accurate management system is crucial in order to assure that rules and regulations are fullfilled. The OHSAS 18001 standard covering OH&S management is intended to provide organizations with the elements of an efficient OH&S management system. The work with this thesis was done at Swemat AB in Härnösand wich is a mechanical industry. In the thesis, the requirements of the OHSAS standard are compared with the current management system.

This report is the product of the course AF101X, a bachelors degree in Samhällsbyggnad atKTH. The task of the course is to design a small house at a given location and also implement adeepening study. The house in this report is located in Kiruna in the north of Sweden, where theclimate is much colder than in the rest of the country.The deepening study of this report is to evaluates how realistic passive housing north of thePolar Circle is based on those facts. The house will to some extent be designed to fit the passivehousing standard.

Bachelor thesis, Business Administration and Economics Programme, School of Business and Economics at Linnaeus University in Va?xjo?.Spring of 2015 Title: Performance measurement from a cost leadership perspective - A case study on Gekås.Authors: Adrienn Csiszer, Hannah Lundberg & Helena WennerströmTutor: Eva GustavssonExaminer: Karin Jonnergård Keywords: Performance measurement, Performance measurement systems, Generic strategy, Cost leadership strategy, Financial and non-financial measurements. Purpose: The purpose of this study is to examine how a company with a clear cost leadership strategy chooses to work with performance measurements, with a view to comparing a practical example to theorethical approaches. Methodology: The method chosen for this paper is a case study on Gekås AB. The presented data were collected through interviews conducted with four employees on Gekås. Conclusion: The study concludes that for a business with cost leadership strategy the financial measurements are more important than non-financial meausurements. For Gekås it is important to keep the performance measurement simple and understandable for the employees. They only use three measurements (sales, hours and sales per hour) in planning and in evaluation.

As IT service departments in organisations are becoming more complex and customised, the indirect costs are increasing in relation to the total costs. The difficulty of fully estimating and identifying the spread of the cost in the IT service department is increasing. As a result, firms tend to budget the business unit as a total cost rather than as a spread of defined costs. In order to deal with this challenge an ABC calculation will be applied. The Time Driven ABC model will be conducted in OMX´s Servicedesk unit within the IT services.

The goal of this paper is to provide a model for a sustainable electricity system to an island, in the Pacific Ocean near the equator.The method which has been used is to model supply and demand of electricity in the computer program Stella, through the creation of a dynamic system that balances them against each other. The result from the model will then be used to calculate the electricity price per kWh for the island.The result of the work is that electricity from solar energy is comparable with electricity produced from oil, if the oil pays for all its external costs, and the potential for pumped hydro storage plants is located. It also requires that consumers of electricity can be their own producers to avoid the expenditure of tax and reducing the cost of distribution. But since oil is a finite resource and has had a rising cost in recent years, while solar energy has had a declining cost, perhaps this will be a more competitive solution in the future.

Life Cycle Cost, often abbreviated as LCC, is a common tool for comparing the total cost of different alternatives, such as heating and cooling methods. Common heating and cooling methods in Sweden are geothermal energy, district heating and district cooling. This report aims to evaluate how different heating and cooling methods differ from each other while being applied on three different types of buildings, using selected LCC-models. Information about the selected LCC-models wasretrieved from each separate model and its website. Reports and agencies were used as sources for information about the heating and cooling methods.

Driveability analysis of terrain data offers an important technique for decision support for all kinds of movements in the terrain. The work described in this report uses a high resolution digital terrain model generated from the laser radar data and further processed by the Category Viewer program, and information from the Real Estate Map. Properties of features found in a filtering process are calculated and compared with a set of rules in a knowledge base to get a driveability cost. This cost is then visualized in a graphical user interface. An evaluation of what driveability is and what it is affected by is performed, and a general cost function is developed, which can be used even if not all relevant information is available.