This thesis is a product development project that was performed at Alfa Laval Tumba AB. In the past Alfa Laval have manufactured gas separators for engines where gas flows were cleaned from oil. A new business area for this kind of technology has shown to be the manufacturing industry where oil mist has to be separated from the vented air. Therefore a new and bigger design is needed to be able to handle the greater gas flows. A product like that would be a strong competitor on the market when the maintenance would be low in comparison to today?s equipment.During the project several concept suggestions were developed using customer interviews and research as input.

The energy in laundry rooms, in form heated air, can be utilized with a heat exchanger. A concept and an early prototype of the heat exchanger have already been developed to show that the theory works. This report describes the continued development and construction of the product.A field study was made in order to investigate the environmental usage and establish the product design. The most common washing machine was used as a calculation model, and calculations were also made to estimate the amount of energy in the air. A previous analysis of the existing prototype is also presented in this report, to show the products potential capacity.

Lundbergs Plåt AB is a small company situated in Jönköping. Their main task is to process different kinds of steel such as stainless steel. Lately, they have shown an interest in Lean production.On the basis of the situation mentioned above, we developed the purpose to find and decrease the non value-added wastes in the production at Lundbergs Plåt AB. Out of this, we also developed and answered two questions: Which wastes can be found with help from a value stream mapping (VSM)? In what way can these wastes be reduced and how can these reductions contribute to an improved production? VSM is the method used to find the non value-added wastes.

As a result of global competition, companies within the automotive industry are required to improve their production systems to achieve sustainable and competitive production. To attain operational excellence, companies have adopted concepts like lean and World Class Manufacturing (WCM).In order to deliver, companies need to increase the availability and reliability of production equipment. This demands focus on both operational and strategic maintenance, and efficient equipment acquisition and management. The main objective of this thesis is to identify processes and success factors that are necessary for improved maintenance performance. By conducting a case study and by performing a literature review, the following has been studied: 1) how companies within the automotive industry work with maintenance and maintenance strategies, 2) implementation of maintenance strategies, and 3) new acquisition and spare parts management for maintenance. The results show that basic maintenance concepts and related terms are well defined in the literature.

In this report two Sustainability Life Cycle Assessments are carried out for two types of tiles for Riksbyggen, to contribute to a sustainable urban transition. Sustainability Life Cycle Assessment involves performing a life cycle assessment based on four principles based on scientific research and presented by the non- governmental, non-profit organization, The Natural Step. The principles concern raw materials, chemically produced substances, degeneration of nature and social conditions.Origin of products, manufacturing sites and manufacturing procedures were initially completely unknown and much of the work has consisted of finding the entire cycles, understand manufacturing processes of ceramic tiles and evaluating what materials and what type of energy sources that are required for the production. A socially sustainable perspective has been of high relevance alongside an ecologically sustainable perspective.The report begins with the basic underlying facts and the purposes of this investigation and that the reasons why Sustainability Life Cycle Assessments are carried out are to provide Riksbyggen and the own workers with documents presenting Riksbyggens ideas regarding sustainability and to hopefully get the ideas further down in the supply chain. The methods used to fulfill the investigation are presented and scientific facts about LCA and ceramic building materials are reviewed.

The survey aims to shed light on traditional and contemporary bottom floor frames, their construction and different insulating materials; mineral wool, wood shavings and charcoal. The purpose is to analyze and discuss the similarities and differences as well as the pros and cons with a focus on the construction and the different insulating materials. The work has been limited to comparing two different wooden floor frames. The first one is based on a real floor frame from an older building, this example is presented as the traditional floor frame in this study and are from around 1940. The other floor frame is presented as a contemporary floor frame and is based on wood building type descriptions and literature.

The construction industry has been heavily criticized in the past few years for its development of productivity compared to the manufacturing industry. In 2009 the Social Care Center developed a report that treated och criticized different errors within the construction industry. For instance competence, construction errors and performance had showned bad results which had to be improved. A common sentence within the building industry is that ?every project is unique?. Today it?s common for a construction company to have costs for material and services which exceeds two-thirds of the total cost.

AbstractAccording to research made by Statistics Sweden on the members of the labor union IF Metall the number of reported musculoskeletal disorders for employees working under the collective bargaining agreement for the automotive industry has almost doubled since 2003. During 2004- 2006 and 2008 male assembly workers were the occupational group with the highest amount of reported work related disorders in Sweden. To prevent musculoskeletal disorders is according to Rose and Orrenius important both for the individual, the society and the industry by reducing economic and personal costs. The purpose of this paper is to identify and analyze how the manufacturing industry is affected by musculoskeletal disorders that occur when working with line assembly and how companies can prevent them. The report aims to provide the reader with an understanding of what musculoskeletal disorders are, to which extent they occur in assembly, how companies are directed by laws and regulations and how they affect the Swedish manufacturing industry and their employees.

Within process or manufacturing industries, the production of goods and services or the products themselves may have negative side effects such as pollution. An important task for environmental policy is to control and limit these pollutions, for example via regulatory measures. Although, the efficiency of such measures vary greatly between different industries and an increasingly important task for environmental policy is then to encourage companies to engage in environmentally motivated innovation. Governments can utilize other measures than regulation to indirectly decrease pollution. This thesis aims to analyze such activities and how it affects the innovativeness of wastewater treatment, refrigeration and automobile manufacturing industries.

Rapporten beskriver arbetsgången vid utvecklingen av ett kompressorkit till Yamahas snöskotermodell RX-1. Arbetet innefattar konstruktion och dimensionering av tryckkammare och laddluftkylare. Datorverktyg i form av CAD (Computer Aided Design) och FEA (Finite Element Analysis) har använts till att konstruera och dimensionera ingående komponenter. Arbetet har resulterat i kompletta CAD-modeller av ett prototypkit färdigt för CAM- beredning (Computer Aided Manufacturing) och tillverkning..

The work thesis was performed at Assalub a company which is situated in Åtvidaberg. The company works with developing, manufacturing and marketing equipment for handling of lubricants for light and heavier industry. The work thesis it is based on a inquiry Assalub got from MacGregor which is a company within cargo solution, from port to offshore system.For unloading grain and other material from the ship cargo it is used combined inlet feeder and screw conveyor, there the inlet feeder is drilling down through the cargo and feed the screw conveyer with material to further destination. At the bottom of the screw conveyer and the inlet feeder there is a bearing that keep the parts together. However the lubrication of the bearing must be made manually.

Quality can be defined as the ability of a business to satisfy their customers? needs and expectations. Total Quality Management is defined as the way to prevent, appraise and improve the entire organization to increase the product quality. In order to systematically increase quality in an organization, there are different quality systems in use. One example is process management, which is to divide the activities of processes.

A manufacturing machine at the engineering company Sandvik Coromant has a positioning table which task is to move an item linearly. The positioning table has a linear motor capable of high velocity and acceleration. This makes it possible to achieve short cycle times and a more profitable production.The purpose of this thesis is to bring forward a new concept which is more adapted to the requirements of the positioning table. The reason is that the current positioning table provides an unnecessarily positioning accuracy of 0.01 mm, while the requirement for the positioning accuracy is just 0.1 mm. The goal is to reduce manufacturing and component costs.To develop a suitable solution an approach for the concept development process has been performed.

This study was conducted at Glimek AB, a company that has chosen to decentralize its central storage unit in order to increase production efficiencies. The purpose of the study was to identify the problems in the production cycle that lead to the decision to decentralize the central storage unit, as well as identifying what the decentralization entails. The effects of the decentralization have not been analyzed in the study, and consequently neither financial nor production disadvantages have been considered.Appropriate questions were formulated based on the chosen underlying theories, and were asked to selected individuals with relevant knowledge. The study is based on the information that was gathered from interviews with management as well as staff within the company. In addition, supporting information such as flowcharts, drawings, orders and decision support documents were supplied by the company.

Additiv tillverkning (AT) eller 3D-utskrivning är en teknologi som har berömts den senaste tiden och förutsägs kommer att förändra hela tillverkningsindustrin. Dessa termer hänvisar båda till ett antal tillverkningstekniker där ett objekt framställs skikt för skikt genom att successivt tillföra material i tunna lager.Baserat på en litteraturstudie och intervjuer med experter inom området undersöker denna studie möjligheten att använda AT inom företaget CJ Automotive (CJA) vilket är en underleverantör inom fordonsindustrin som tillverkar olika slags pedalsystem. Rapporten beskriver additiv tillverkning, dess fördelar och olika användningsområden. Olika AT-tekniker, AT-material och välkända 3D-skrivartillverkare presenteras. Signifikanta fakta rörande både kvalitet, kostnad och teknik redogörs för.