The use of earth bricks in Scanian building traditionThe present work is concerned with the manufacturing and use of earth bricks inbuilt heritage in the south Swedish province of Scania. The first part of the studyprovides a thorough description of the traditional use and manufacturing of earthbricks based on relevant literature, archive material as well as interviews withinformants. This forms a basis for the second part of the study in which practicalexperiments on and tests with earth bricks where carried out. This involved themaking of traditional earth bricks of different composition. The new handmadebricks were compared with industrially produced bricks (extrusion bricks) and oldhandmade bricks.

One of the most distinguishing features of contemporary globalisation is production fragmentation, a splitting up of the manufacturing of a good into several different stages. Production fragmentation creates new opportunities through vertical specialization; a country incapable of mastering the entire production process may specialize in the manufacturing of one separate part. The aim of this thesis is to examine to what extent international integration affects a country?s ability to engage in vertical specialization in an industry characterized by production fragmentation. The analysis focuses on the european integration process over the last decade, where countries in eastern Europe with relatively low labour costs have been integrated with more capital abundant western economies.

Problem: In society of today corporate competence is an important factor for survivor and development. IT is developing rapidly and can not be ignored by companies. Then need for people with IT-competence is conquent increasing. A survey of corporate IT-competence is therefore of interest for companies as well as for local authorities. To determine the IT competence within an organisation, this competence has to be measurable.

The project was carried out with SwedSafe AB, engaged in hearing and manufacture of earplugs. Since the company is a world leader in the sale of these products, it is important that they keep a higher level of quality of these products.Production of earplugs is currently a automated manufacturing process that is divided into four conveyor belts and one of the conveyor belts is what will be affected in the project. The belt affected during this process is exposed to various elements such as filling, closing, fermentation and extraction of products. Because the belt gets dirty, degraded products and the work environment is affected. To increase the quality of products and improve the working environment requires an automatic cleaning process, which collects dirt from the belt.The aim of the project is to design a machine that prevents the belt from becoming dirty, preserve molds clean and improve the working environment without disrupting production.

AbstractThis study deals with the tours carried out in the manufacturing sector, at Alfa Laval in Eskilstuna. A large number of visitors, from a variety of backgrounds, go there to see how the manufacturing of separators works. With visitors I refer to the company?s customers, suppliers, students, in- house trainee courses, managers and senior citizens groups.The study examines how these tours can be standardized using spatial design. The result shows the importance of working systematically with visualizing the work as well as the environment for optimizing the visitor's understanding.

VBG Produkter AB is a process-orientated company that develops, manufactures and markets trailer couplings with belonging coupling equipment, protection equipment against skidding and stands for wagon-bridge for heavy vehicles. The company feels that their set-up time in production for couplings is not at an acceptable level. Due to high demands of customer oriented production the intermediate stock level of included products within the assembly of couplings has gradually increased which has resulted in high inventory holding costs. VBG Produkter applies Kanban in their production, therefore it is important to produce exactly the necessary amount and avoid overproduction. The objective of this project is to suggest appropriate solutions so that VBG Produkter is able to reduce their set-up time in assembly of couplings, by identifying internal and external set-up time for the chosen process bushing cell.

The austenitic stainless steel 316L has been compared to duplex stainless steels to be able to highlight a choice of material for manufacturing of spare tanks used for cooling water at nuclear power stations on the Swedish west coast. In this report 316L and the duplex stainless steels 2205, 2304 and LDX 2404 have been compared according to corrosion resistance, strength, manufacturing aspects and prices. The steels arranged by increasing corrosion resistance: 316L < 2304 < LDX 2404 < 2205. The steels arranged by increasing strength (considering the thickness of the plates needed for construction): 316L < 2304 < LDX 2404 and 2205. The steels arranged by increasing price/tank: 2304 < LDX 2404 < 2205 < 316L.

This thesis has been performed at International Aluminum Casting AB in Eskilstuna,Sweden.International Aluminum Casting is currently working with a number of improvementsin their production in order to achieve their vision of being the leading aluminum foundry in Sweden. As a step in their improvement efforts, focus was directed ondeveloping the company's fixtures for machining.Efforts were focused on two main objectives: to develop a complete proposal on afixture which leads to a more rational use of an assigned part and also form general design advice for development of fixtures in the future.During the work progress, discussions have been made with experts at International Aluminum Casting within the field of fixture design. The objective was to obtain sufficient knowledge about the underlying problems with the current fixture for the part. At this stage of the thesis, a number of essential criteria for fixture design were produced. Information and inspiration were obtained by examining the company?s currently developed fixtures.After gathering the necessary information the process of developing three different fixture concepts started.

Valmets own foundry in Karlstad has during a long period of time had problems being profitable. The goal today is to turn this around. Today there are three different productionlines; engine blocks, Yankeecylinders and components for the wind turbine industry. This master thesis has focused on examining if value stream mapping is a useful tool to use in a foundry, and therefore outside the typical manufacturing industry. The target has also been to evaluate if there is a possibility to improve the flow in the foundry and also the results.During the 20 weeks this work has been done at the foundry data has been collected and analyzed.

Fuel pellets are a refined bio fuel mostly consisting of residues from sawmills and wood industry. At Rindi Västerdala AB's combined bio energy plant in Vansbro fuel pellets are produced, while the waste heat from the process is used for district heating. The pellets are produced from sawdust, wood shavings and dry wood chips that is dried, milled and pressed into small cylindrical rods. The advantage of refining the wood material in this manner is that the energy value is greater per unit volume and unit weight, thereby the cost of transportation per energy unit is reduced. Also, less storage space is needed.Pellet manufacturing is a complex process since many parameters affects the final results.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

The purpose of this paper is to survey the textile based proto-industrialism in Sweden in the middle of the 19th century. This case study is founded upon Anders Hansson?s pre-industrial textile production at the estate of Mölneby, Östra Frölunda in the rural district of Kind in the province of Västra Götaland.Account books from the year 1853 related to Anders Hansson?s wool fabric manufacturing have been looked into and categorized using a quantitative research method. The research has also been supplemented with a number of interviews.The result of the survey shows that Anders Hansson?s business activities fit into Mendel?s theory of proto-industrialists at a practice level.By collaborating with a merchant in Gothenburg the fabrics were traded in unknown markets, as well as in more familiar neighbouring districts.

Syntesdesign AB is an academic company that is supposed to enter the HIV drugmarket by manufacturing a "me-too"-drug with indinavir as the starting substance.Our task is to find 100 potential indinaviranalogues. Our further task is to suggesthow to perform a bondingassay to test the affinity for all these analogues. We willpresent a method, required equipment and calculated costs for the assay..

Zetterberg's Industri AB believe that capital and lead time will be reduced by implementing Kanban. Therefore, it was an investigation to prove that Kanban is an effective method. In this work a research had to be done to show how the material supply system looks like today and to explore the subframe components to see which components that are interesting from Kanban viewpoint. Previous orders of subframes were investigated. Therefore, it was a list of the various components of the previous orders for the subframe.

Due to increasing product availability and higher demands on fast deliveries, the competition between companies is growing. To be able to satisfy the customers? requests an efficient logistics system with short throughput time is required. By using tools associated with Lean production companies are able to make great improvements in their manufacturing systems and reduce lead times to satisfy customer demands.There are two classifications associated with manufacturing, high variety and low volume (HVLV) and low volume and high variety (LVHV). The general belief is that the concept of Lean production is difficult to implement in a production environment with high variety and low volume due to the concept being adapted to mass production.