In today's society, the availability of energy plays an integral part in our everyday lives. Unfortunately, the price of energy in Sweden has increased in recent decades. A large part of our energy consumption goes to heating modules for houses, where heating methods that depend on energy sources such as electricity, district heating, fuel oil, gas and biofuels are the most common ones. During the winter period, the increase in energy costs becomes significantly evident, especially for small property owners. This increase in energy cost is most noticeable for home owners with electric heating.This thesis is written at the Halmstad University, in cooperation with a company, which makes parts of this thesis confidential.

The vertical electronic excitation energies for the narrow-bandgap polymers LBPF, EP37 and EP62 have been calculated using Density Functional Theory (DFT). Also the vertical excitation energies for the acceptor unit of LBPF have been calculated using the Hartree-Fock (HF), DFT and Coupled Cluster (CC) methods. The calculations cover the visible and infrared wave length region and two strong transitions are obtained, one corresponding to the pi to pi* transition and one corresponding to the pi to Acceptor transition. The excitation energies obtained from DFT are below the corresponding experimental results and attempts have therefore been made to perform bench-marking calculations using a hierarchy of CC methods..

In this Thesis the possibilities of designing a larger building that is very energy efficient in the sense that it would not need a conventional heating system are discussed. Solar radiation transmitted through the windows, internal heat from occupants, lamps and electric appliances inside the building and heat recovered from the ventilation system then have to be sufficient for the heating of the building. This study is of general interest since the property company, Akademiska Hus, plans to use this study as a first step in determining if this technique could be used in the future and thus be worth further investments. A building without a conventional heating system of the size investigated in this project has not yet been built.The energy needed for the heating of the building was simulated using VIP+.The conclusions from the study are that it is possible to build large buildings without any conventional heating system. This could be achieved in many different ways, for example by lowering the inside temperature or by using better windows and heat recovery system with higher efficiency.

The purpose of this thesis is to examine how key performance indicators are being used as performance management tools within the production industry. Specifically the purpose is to investigate how the KPI:s within the telecommunications industry drives reusability regarding production test systems. This thesis will also highlight today?s cost models and suggest improvements of the KPI and what new ones could be introduced. A case study at Ericsson AB has been performed.

The purpose of this thesis is to examine how key performance indicators are being used as performance management tools within the production industry. Specifically the purpose is to investigate how the KPI:s within the telecommunications industry drives reusability regarding production test systems. This thesis will also highlight today?s cost models and suggest improvements of the KPI and what new ones could be introduced. A case study at Ericsson AB has been performed.

The market-leading wage and PA-.system for the Swedish public sector Palasso is developed in Karlstad. In order to achieve the highest quality of code , the developing team behind Palasso has been conducting extensive testing. Testing is done to ensure that the software does what it should do. However, the testing has been done at a high level. In order to continue to evolve, the group that develops Palasso has started to look at the new development methods that have become popular in the computer industry in recent years.

Syftet med denna uppsats är att belysa hur trumslagaren påverkar den musikaliska helheten och interagerar med sina medmusiker i modernt jazztriospel. En jämförande analys har gjorts av skivinspelningar från 1961 och framåt med trumslagarna Paul Motian, Jack DeJohnette och Jorge Rossy. Analysen behandlar rytmik, dynamik och klangfärg i två standardlåtar, All the things you are och Solar, och baseras på transkription i partiturform med avsikt att tydliggöra musikernas interaktion. Uppsatsen innefattar även en konstnärlig del i form av en inspelning, där jag tillsammans med en pianist och en basist framför tre standardlåtar. Dessa inspelningar diskuteras i relation till det analyserade materialet.

During spring 2005 I, Hanna Brogård, undertook my bachelor degree project in furniture design. The supervisors were Glenn Henningsson at Njudex in Vrigstad and Leó Jóhannson, teacher and examiner at Carl Malmsten CTD in Stockholm.The project was based on three elements:Design concept for upholstered furnitureCooperate together with a sofa producer for professional supervision and to learn more about industrial production and upholstery techniqueLearn more about furniture history of styleI contacted a sofa producer called Njudex, in the province of Småland, who became my work partner during this project. Eclecticism is the name of the furniture styles that became popular during the mid-nineteenth century. It develops from a new, rich society class arisen from industry and trade. The trend is based on the escape from reality to dreams of foreign countries, past centuries and nature.

I detta examensarbete utvecklas ett solcellsstativ i trämaterial. Ett idékoncept fanns somgrund för hur stativet skulle kunna utformas. Detta har vidareutvecklats, till färdigt systemanpassat för tillverkning.Resultatet blev ett fackverksstativ i trä bestående av vinklade halva oktaeder i rad.Trädetaljerna binds samman med knutpunkter i formsprutad plast, som med klämkraft hållerfast trädetaljerna. Knutpunkterna är konstruerade för att minimera åverkan på träet samtmotverka röta.Systemet är verifierat både genom beräkning, simulering och jämförelse med liknandekonstruktioner. Materilavalet är gjort med systematik enligt Ashby, Material Selection inMechanical Design.

Wood for commercial use is harvested from forests using forest machines like harvesters which folds, branches and cuts trees and forwarders which transports logs to a landing area for further transport to a processing facility. Future forest machines have to be much gentler to the machine operators and forest soil than today's machines. Hence new machine solutions must be developed and tested. A practical way is to develop a physical scale model which can be used as a test-bed to incorporate different types of solutions for suspensions, cabin damping, tires and tracks, crane and overall architecture. The aim of this project was to develop such a 1:5 scale model of a forest machine, named as ?Skogbil.A scaling strategy was employed to arrive at important scale dimensions and specifications ofSkogbil which would be comparable to the full scale model.

The increase in sales of the so called smart phones has meant that there has also been a requirement to determine new applications for which they are suitable. One of the largest platforms for smart phones is Android and the task of this thesis is to develop an application for a company that wishes to create interactive radio for the Internet. In addition to ordinary radio features, the company would like the application to be able to present images and a small web page called Canvas. The overall aim ,of this thesis, is to build a fully functional media player that is compatible with the majority of the commonly used Android based mobile units. To fulfill the overall aim, nine explicit goals were targeted.

This is a report for our thesis that was conducted as a conclusion of our bachelor degree in Business engineering at the Royal Institute of Technology (KTH). The work is done in cooperation with the firm Navigate Consulting Business Solutions AB.They have their leading expertise in Oracle E-Business Suite and has previously chosen to implement Oracle EBS R12. The modules that are planned to be implemented are general ledger (GL), accounts payable (AP), accounts receivable (AR), project module (PA), purchases, and CRM. For a consulting company like Navigate, it is particularly important to have a simple and effective time reporting process. We were therefore asked to provide new tabs with a decision-making process to determine if Oracle Time & Labor (OTL) is a useful time tracking system for their business.In order to achieve the company´s aim and objective we decided to follow a development method with five different phases.

In cooperation with the Gislaved company Lerocon AB [1], a separation module wasdesigned as a further supplement to the Module System. The aim of theprojectimplementation was that the separation module could be flexible enough to feed themetal pieces, screws, nuts and other items with large variations of size, appearance andmaterial composition. The module should also be cost effective to manufacture.A separation module is a design which is ment to streamline the work in industries withautomation of the lineoperations. The module feeds the details such as screws, nuts, washersand pieces of metal in a continuous flow in which traps separate the details from each other.Traps may vary depending on the purpose and of the details that are fed. Perhaps it isimportant for the user that the detail-orientation is right after the separation module, whichmeans that all the pieces witch aren´t are fed back in return.For companies and industries in lineoperations that can be made more efficient withautomation, are production flow an important watchword.

Alfa Laval?s strategy is to focus on modularized product platforms. Several benefits areforeseen, reduced lead-time, less costs, shorter Time To Market and better quality.Development and verifying will be carried out on block level. Today the separators arebeing tested as a complete unit. A number of factors affect the test results and problemsthat are encountered can be hard to identify.

All around the world more and more people move from rural areas to live in the cities. Because of this, the urban areas have become an important part in the debate about the effects on the environment and sustainability. In many countries word wide initiatives have been taken to build sustainable cities and eco cities, the Stockholm Royal Seaport is one example. The vision for the district is to become a world class sustainable city based on the three dimensions of sustainable development: social, economic and ecologic. The municipality of Stockholm has set requirements for the buildings? energy usage, emissions and amount of waste generated during the building process.