Almost 10 years after the attack on World Trade Center Sept. 11 2001, Osama bin Laden was shot and killed on May 2 2011 in Pakistan. How was this event framed by the media with regards to the global war on terror? This study compares two different American newspapers ? the New York Times and the New York Daily News ? and how they framed the war on terrorism in the Middle East from May 2 to May 15 2011. By analyzing the framing in a perspective of the four functions of framing theory: define problems, diagnose causes, make moral judgments and suggest remedies, we found considerable differences in each papers frames.

Detta examensarbete vill påvisa en möjlig väg till kompetensutveckling på call centers: personalens deltagande i ett praktiskt utvecklingsprojekt. Studien har skett i samarbete med ett väletablerat call center i Norrbotten, Kalix Tele24. Projektet genomfördes under åtta månader på Kalix Tele24, med stöd och kunskap från en student/handledare från Luleå tekniska universitet, densamma som författaren till examensarbetet. Projektet gick under namnet Projekt Helhetssyn och fokuserade på att hitta förbättringar för samarbete och kommunikation inom företaget samt att skapa rutiner för informationsspridning. Allt arbete inom projektet utfördes av en projektgrupp, bestående av personal från olika delar av Kalix Tele24.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

When farm animals are transported there are several factors that can affect their welfare. If the vehicle has an accident the welfare of the animals transported will probably be compromised. The aim of this study was to make a survey of accidents with animal transportation vehicles in Sweden. The survey included the number of accidents from January 2000 to May 2014, the cause of the accidents and how the animal welfare was affected by the accident. The authorities which were likely to have reports about accidents involving animal transports were contacted. There were no collected records about transportation accidents and the authorities referred to eachother for information.

The aim of this thesis is to study a number of standards and theories, from the two research areas human-computer interaction and psychology, about how a graphical user interface (GUI) should be composed in order to facilitate interaction between humans and computers. Special emphasis is put on how the GUI should take into consideration the strengths and limitations of human cognition and perception. A study of three web catalogues shows how these theories appear when concretised. The following questions are answered in this thesis:What guidelines and styleguides can be found that specify the design of a user-friendly GUI?How do a few library catalogues on the web match a selection of these design principles?The guidelines are extracted from literature concerning human-computer interaction, psychology, automated library systems and web design.

Syfte: Syftet med denna studie är att utvärdera Ocular Protection Index (OPI) för att se om det är en användbar metod vid diagnosticering av torra ögon. En del i utvärderingen är att undersöka korrelationen mellan OPI och resultatet på en symtomenkät, Texas Eye Research and Technology Center Dry Eye Questionnaire (TERTC-DEQ).Metod: Försökspersonerna fick i början av undersökningen fylla i TERTC-DEQ. Därefter observerades försökspersonerna vid läsning på avstånd och nära håll för att mäta deras blinkintervall. Försökspersonernas ögon undersöktes med spaltlampa och Tear Break-Up Time uppmättes för att därefter räkna fram OPI för varje försöksperon.Resultat: Totalt undersöktes 34 personer varav 4 personer exkluderades på grund av att de ej uppfyllde urvalskriterierna. Endast mätningar på höger öga redovisas i resultatet.

The project has been performed in a close collaboration with Hörsam who works in the field of hearing technology. In a first meeting with the company, the Project group was showed a few existing storage boxes for hearing aids. The company thought they were unnecessarily large with plenty of unused space and wanted a new, smarter solution to be developed.The project began with user studies in which audiologists, maintenance technicians, future users and others were interviewed. The purpose was to obtain their views on today's storage boxes and to find out how well the users maintained their hearing aids. It proved to be a large lack of knowledge regarding the management of hearing aids within the users.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

Bakgrund: Prestationsmätning syftar till att implementera ett företags strategi. För att lyckas med det krävs tillgång till relevant information för att ta rätt beslut. Nya alternativa organisationsformer som shared service centres har lett till en ökad efterfrågan på ny anpassad ekonomistyrning. En förfrågan om att utvärdera P2P-processens prestationsmätningssystem på IKEA AB, Finance Services ledde till utvärderingsstudien.Syfte: Syftet med utvärderingsstudien är att utveckla en modell med dimensioner, för att analysera prestationsmätningssystem på shared service centres. Analysmodellen kommer appliceras på P2P-processen inom IKEA AB, Finance Services.

The project ?Investment proposal for grinding station for service work of screw feeders? has been performed during the spring semester 2014 for the course Bachelor?s thesis for degree of  Bachelor of science in machine engineering at Karlstad?s University. The project has been performed in cooperation with Fiber Workshop which is a service department in the company Valmet AB. Valmet AB is a company that develops and manufacture soft paper tissue machines. The screw feeder is a part that is used to feed, and squeeze out the water out of woodchips.

A one-cylinder research engine has been used for studies with a Diesel Dual Fuel concept (DDF). DDF is a concept that utilizes a pilot diesel injection to ignite a homogenous natural gas/air mixture. Emissions and engine efficiency have been analyzed in an emission cycle called European Stationary Cycle (ESC) and the knock/pre-ignition problems with this type of engine have been investigated.At low and mid torque levels, an early diesel injection around 60 crank angles degrees (CAD) before top dead center (TDC) was used. At these loads raw NOxemissions was below EURO 6 level (0.2 g/kWh). NOxwas at EURO 5 level over the complete ESC without after treatment and with SCR at high loads it should be possible to reach EURO 6.One issue with DDF is the high HC emission levels.

In this project the task has been to develop a product that will facilitate an operation for personnel working in a sterilization center. The operation is to steer the front of a loading trolley into the chamber of an autoclave, a so-called docking. The moment is complicated because the margins to deviate from ideal docking position and still succeed, is very small.The principal Getinge's desire was that the product could be retrofitted at the customers on their existing systems. One of the demands was that the product should fit two types of trolleys, one with a adjustable working height and one with a fixed working height. Getinge is supposed to purchase the system from a subcontractor who shall manufacture it and the requirement from Getinge is that the cost of purchase mustn't exceed SEK 500Initially principles, solving the problem was developed.

Detta arbete har genomförts i samarbete med Ekdahls Möbler, ett företag verksamt i Småland som utvecklar och producerar möbler. Resultatet av detta projekt är att en stol för offentliga miljöer och med svanenmärkningens grundtankar och principer som ledord tagits fram. I utarbetningen av stolen anser jag att det bevisas att ett företag kommer tjäna pengar på att svanenmärka sina produkter. Kan då ett företag vinna på att svanenmärka sina produkter? I dagsläget ter det sig som marknaden för miljömedvetna möbler främst finns inom den offentliga miljön där man kan se en ökad efterfrågan efter mer miljöanpassade produkter.

In Sweden whenever trains or maintenance workers want access to the railway system, their requests of usage and movements are being supervised, granted and handled by train dispatchers. The profession holds a key role in making the complex railway system work in terms of efficiency, safety and delivering on-time arrivals. This master thesis, delegated by the Swedish Transport Administration, has been carried out at the Division of Human Computer Interaction at Uppsala University and at the train traffic control center in Gävle. The aim has been to map what information the train dispatchers use in order to make safety-related decisions concerning their working goals. And further to describe and analyze how the train dispatchers, visavi their tools and systems in the work domain, gather necessary information.The result indicates a complex, diverse and spread out setting of different programs, procedures and tools that make satisfactory fulfilment of efficiency, safety and punctuality in relation to the time table hard.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.