Sök:

Sökresultat:

5963 Uppsatser om Small scale biogas production - Sida 65 av 398

Etanolmarknaden i Brasilien : etanol som fordonsbränsle

According to the EC fuel regulations 2 % bio fuel has to be blended in all fuel by the year 2005, and 5.75 % by the year 2010, which means ethanol for gasoline driven vehicles, so there will be a substantial demand for ethanol. Brazil already has an established industry for producing ethanol and is the leading producer and exporter of fuel ethanol. My purpose with this paper is to investigate why Brazil decided to develop ethanol production on a large-scale operation and to find out today?s situation. Focus will mainly be on ethanol production with sugarcane as a feedstock.

EKONOMISTYRNING I EN MOTORVERKSTAD: En analys av centralt ställda krav ur ett operationellt perspektiv

The purpose of this thesis is to analyze the design and function of an engine production management?s control system and its intended function, and to contrast it with the present management control systems in use on an operational level. Interviews conducted with employees from all levels of the engine production are the main source of this study?s empirical foundation. Information has also been gathered from relevant written material such as annual reports, internal documents etc.

Förenklad revision av mikroföretag? : En kvalitativ studie sedd ur fyra revisorers perspektiv

Background: Sweden has, since 1983, had a statutory audit for all joint-stock companies. However, according to EG?s fourth corporation directive, member countries can decide on their own if this applies for small joint-stock companies. An investigation was launched in the fall of 2006 to form an opinion on the importance of the audit reporting by law and what an abolishment of this rule would mean for small joint-stock companies. Critics are claiming that the cost of audit for small companies is exceeding the cause in these micro companies.Audit is regulated by Swedish translation (RS) of International Standards on Auditing (ISA) and is to be applied in all companies comprised by the statutory audit.

Livsberättelsen som arbetsredskap

Introduction: Anxiety and depression are common among patients enrolled in psychiatric outpatient care. Ear Acupuncture is an alternative form of treatment that has been shown to relieve anxiety and depression in previous studies.Aim: To evaluate ear acupuncture as a group treatment for depression and anxietyMethod: A psychiatric outpatient clinic has been offering group treatments with ear acupuncture for anxiety and depression for 5 weeks. Participants of the study have answered self-rating scales Montgomery Åsberg Depression Rating Scale, Beck Anxiety Inventory and Sheehan Disability scale before and after the treatment period. Material was collected in the period 2008-2012 and has been analyzed in SPSS.Results: Data from 31 patients were included in the study. The results from the study showed a significant difference, between the measurements before and after treatment, with a reduction of the average values in the three different scales.Summary: From this study, it is difficult to draw any conclusions about the effect of ear acupuncture.

Fem-Faktor modellen och stress : Personlighet som prediktor fo?r upplevda pa?frestningar?

Tidigare forskning visar att personlighet har betydelse fo?r individens stressupplevelse. Sa?rskilt individer ho?gt i Fem-Faktor modellens personlighesdimension neuroticism tenderar att upplevd ho?gre stressniva?er a?n o?vriga fyra personlighetsdimensioner extraversion, samvetsgrannhet, o?ppenhet och sympatiskhet. Denna studie underso?kte relationen mellan samtliga personlighetsdimensioner, samt en del o?vriga variabler, och stress.

Motivationsfaktorers relevans för medarbetarna på Sörmlands sparbank Vingåker : En kvalitativ studie

Bakgrund: I takt med att konsumenters preferenser har förändrats, har företag fått överge massproduktion till förmån för produktionssystem som bättre avspeglar konsumenternas ökade krav på flexibilitet. Ett sätt för att överbrygga denna utmaning är att implementera lean production. Även om detta sätt att producera på har tydliga fördelar för dagens företag, verkar lean production även kunna medföra problem i avseende på att kombinera med den befintliga, i många fall, traditionella styrningen i företaget. En del av styrningen som verkar vara speciellt svår att kombinera med implementeringen av lean production rör mätningen av produktionen. Vid en närmare granskning visar det sig att det råder vissa motsättningar mellan traditionell mätning och lean production som kan påverka företagets beslutsfattande negativt.

Konditionsträning i värme för rökdykare - en pilotstudie

Endurance training in the heat for firefighters - a pilote study Acklimatisering är en psykologisk och fysisk process då en anpassning till en ny eller förändrad omgivning sker efter en regelbunden exponering till en viss miljö. Träning för att främja värmeacklimatisering för rökdykare förespråkas av arbetsskyddsstyrelsen. Syftet med denna studie var att undersöka om 6 veckors ergometercykling i bastu påverkar upplevd ansträngning, toleransen för värme och uthållighet vid rökdykningsövning. Testgruppen bestod av 7 rökdykare. Vår intervention bestod av 6 veckors ergometercykling i bastu vid 70ºC 2 gånger i veckan à 20 minuter.

Marknadsundersökning : Alternativa drivmedel och deras efterfrågan

Syftet med uppsatsen är att göra en marknadsundersökning på drivmedel, som har till ändamål att klarlägga den rådande marknaden liksom hur marknaden kan komma att se ut i framtiden. Med drivmedelsmarknad avses distributionskedjan och kostnader för drivmedel ur slutkonsumentens perspektiv, samt slutkonsumenternas efterfrågan på förnybara drivmedel.För att komma fram till syftet har vi tittat på vilka drivmedel som finns, vilken tillgänglighet de har och vilka kostnader som användningen av varje drivmedel medför. För att titta på marknadens efterfrågan på förnybara drivmedel har vi intervjuat ett transportföretag och ett landsting om hur de ställer sig till miljövänligare drivmedel och kostnaderna dessa medför. Vi genomförde då en kvalitativ undersökning genom att intervjua Caland Transport AB och Landstinget i Värmland.Marknadsundersökningen på drivmedel omfattar de fossila bränslen bensin, diesel och naturgas, biobränslen etanol, metanol, biogas och vätgas, samt eldrift. Vi har tagit reda på kort om drivmedlets aktuella/potentiella produktion liksom energiinnehåll (produkt), men har lagt fokus på distributionskedjan (plats) och kostnader (pris) ur slutkonsumentens perspektiv.

Elevers och lärares beskrivningar av lärmiljöns betydelse för läsning och skrivning i gymnasieskolan.

Syftet med denna studie har varit att beskriva och förstå hur ett antal elever och lärare i gymnasieskolan uppfattar lärmiljöns betydelse för främjande av utveckling inom läs- och skrivområdet. Undersökningen belyser självbildens och motivationens betydelse för utvecklingen samt på vilket sätt eleverna är delaktiga vid utformningen av undervisningen vid svårigheter i läsning och skrivning.  Forskningen har en kvalitativ design där information har inhämtats via intervjuer som har genomförts med fem elever och fem lärare i gymnasieskolan.  Resultatet av studien visar att faktorer i lärmiljön har betydelse för utveckling i läs- och skrivområdet. Eleverna önskar att gymnasieskolan bättre lyssnar till deras egna tankar kring hur lärmiljön ska utformas och lärarna önskar sig större kunskaper i området för att kunna möta eleverna.

Statusbedömning av asynkronmotorer

Induction motors, often referred to as the workhorse of the industry, play an important role in production today. Therefore, it's important to diagnose any faulty induction motor prior to failure to avoid costly and time consuming production stops.This thesis compares methods for diagnosing induction motors in operation, MCSA, Park's vector approach and the standard method used by Swedish industries today. By simulating broken rotor bars and short-circuit in one of the windings, each method is tested and the results are compared using matlab.The results need further verification due to uncertainties of the condition of the test motor, even though the experiment gives a hint of the different advantages of each method. A combination of the methods should be able to tell if the motor needs further examination..

Tidsstudier i kalvuppfödning :

Swedish agriculture stands in front of big changes the whole time. As a milking producer you have to adapt and develop the company to these changes and find the best solution. This potential is easy to find if you compare your company with other similar companies. Labour cost is the biggest cost in milking production after the cost for food. Today it is rather easy to measure how many hours per cow different system of cow houses needs, but we do not know so much about how many hours it takes to breed a calf. To learn more about the labour time with the calves during the first time after the calf was born, I made time studies on five different farms with calf hutches, automatic milk system, large calf boxes, and smaller calf boxes with teat buckets.

Kartläggning av energianvändning under byggfasen vid nyproduktion av flerbostadshus

The energy consumption in the sectors of residential and public buildings is 40 % of the total energy consumption in Sweden. The main part, 85 %, of the energy use in these sectors is for operation of the buildings. The rest is used in the building process. When energy-efficiency measures are taken the energy use during the operation time decreases and the fraction of energy consumption during the building time increases. This project is carried out in cooperation with JM AB and concerns the energy use during the building time of production of blocks of flats at the building site.The main part of the electricity that is used during the production of apartment buildings goes into the heating of portacabins and illumination of the building during the construction phase.

Bilder av Trotskij

My aim in this case study has been to create a method for creature design to test this method in a production and evaluate the results. To achieve this I studied and analyzed the methods of three concept artists and illustrators named James Gurney, Neville Page and Iain McCaig. From the analysis of these artist´s methods, combined with my own personal experience, a new method was formed. To test this method a creature was designed based on directives given by a game design group in the process of creating a table top role playing game in a fictitious world. These directives where given for the creature´s role and its living conditions.

Effektivisering av produktionsflöde : Införande av ny teststrategi

Ericsson AB in Katrineholm is a part of the Section Business Unit Network in the Ericsson Group. The plant's main task is to produce printed circuit boards in small volumes with a high product mix and focus on delivery and cost effectiveness. At the factory they produce printed circuit boards in the Module department.The Module department has for a long time had a high output of non-approved circuit boards in their production. This has led to a growing stock of non-approved circuit boards on the company?s repair department.The purpose of this thesis is to investigate how Ericsson in Katrineholm can increase the outflow of approved articles in their test process in the Module department.

Optimering av SNCR-system i en biobränsleeldad panna : möjligheter till minskade NOx-utsläpp för ENA Energi

Emission of nitrogen oxides as well as carbon monoxides is an inevitable result of combustion. A Swedish law "Law of environmental fee for emissions of nitrogen oxides as a result of energy production" (lagen om miljöavgift på utsläpp av kväveoxider vid energiproduktion (SFS 1990:613)) controls the emission of NOx from energy production by a system of fees. The system has resulted in a strong approach toward less emissions of NOx among the energy production plants. High emission levels, today exceeding 52 mg/MJsupplied fuel, leads to costs for energy production companies. This paper examines possibilities to reduce the emissions of NOx by optimization of the SNCR-technique in a biofuel fired heat and power plant.

<- Föregående sida 65 Nästa sida ->