Studies indicate that between 6-9% of all children has some type of voice problems. Voice problems in children may have different etiology and can affect all ages. In Sweden, there is a lack of a standardized questionnaire addressed to children with voice problems and their legal guardians. The purpose of this study was to translate and validate the Pediatric Voice Handicap Index (pVHI) in Swedish children aged 6 to 10 years. The study was carried out through an internet-based assessment form for children referred to speech and language pathologist/ phoniatrican due to voice disorders in Sweden and a matched control group of children without voice problems.

The purpose of this master thesis has been to find different solutions to the design of a headlamp with a cluster of three or possibly four high power LEDs (Light Emitting Diodes). During the work, two different problems have been considered; how to design a lens in order to shape the light beam in a desirable way, and how to design a cooling system which will lower the temperature of the LEDs as efficiently as possible, still taking into account the geometry set by the optical solution as well as other given geometries. The results presented in this thesis are partly the outcome of a literature study, but derive mainly from a number of tests and measurements made on two test rigs and one concept prototype..

The aim of this study is to get a deeper understanding about user tests as well as answer the question about if testing for users is necessary at all times. I've done a comparison between what the literature says, and what a company says, about testing. The tests that's been in focus in this study is prototyping and card sorting tests. Prototyping aims to give the developer feedback about the design and check if there are any obvious problems with the design. A card sorting test can be used to get input about how information architecture should be constructed.

The aim of this bachelor thesis is to examine the current situation as regarding the political equality in Iran. The method of this reaserch is based on a single-case studie wich grounds in secondary sources. The analysis of this paper is based on fields that concern political equality which in this study will focus on the right to vote, candidacies in the parliament election 2004 and the presidential election 2005. A democracy theory by Jack Lively is used to analyze the political equality in Iran´s political system.The Iranian regim is strongly criticized by the goverments in the Western world and NGO´s for the situation of the democracy and the human rights in the country. Despite the criticism, Iran still continues in the same political direction, although the democracy has gained a stronger role in the political sphere.

Denna rapport redovisar för design- och utvecklingsprocessen i byggandet av en responsiv webbsida. Webbsidan skapades för användning av den blivande spelstudion Rocket Luncher Studios. Wordpress som CMS (Content Management System) har används som innehålls-hanteringssystem för att förenkla uppdatering av webbsidan av uppdragsgivaren själva. Webbsidan är kodad utifrån Luke Wroblewskis ?mobile-first?-tänk, vilket börjar med att fokusera designen på mindre skärmar för att sedan anpassa innehållet mot större skärmstorlekar.

This master thesis was performed at IdaInfront AB. The aim of the thesis was toinvestigate how the design principles ofthe user interface in Windows 8 can beapplied to a case management system. Theuser interface in Windows 8 is based ona design language called Metro and it isprimarily designed for touch screens.Ida Infront AB wanted to know whatpossibilities and limitations the Metrointerface offers.The study has resulted in a prototypeapplication that is developed in Windows8. The prototype shows how the Metrointerface can be applied on a casemanagement system. Some limitations inthe usability have been identified inthe Metro interface when applied to acase management system.

In today?s fast growing and closely connected society, a reliable and energy efficient transportation system is more than ever desirable. Nowadays the significant part of the transportation sector?s energy demand is supplied by fossil fuels.Improving energy efficiency in combustion engines will result in reduction of fuel consumption and CO2 emissions. A modern internal combustion engine has an efficiency of 30-45 %, where the most energy loss occurs as result of heat losses in the exhaust and cooling systems.

The problem presented in this report is that of finding a method to calculate the lift force from a single-element airfoil of arbitrary shape. A number of restrictions are used in order to simplify calculations while retaining reasonable accuracy. The problem is solved for the two-dimensional case only and no finite-wing effects are taken into account. Furthermore, inviscid and incompressible flow is assumed. The method used to solve the problem is the vortex panel method, with vortex singularities distributed over simplified airfoil geometry.

Design management är ett arbetssätt som har börjat tillämpas av allt fler företag de senaste åren, men det kan fortfarande vara svårt att förstå betydelsen av design management. I uppsatsen undersöks det vilken betydelse en design managers kompetens och position har för samarbetet mellan det designköpande företaget och en designkonsult under ett designinköp. Genom ett flertal intervjuer, utifrån både design managers och designkonsulters perspektiv, undersöks det hur samarbetet fungerar mellan dessa parter. En analys av intervjumaterial med hjälp av en teoretisk referensram bestående av design management-teori, design som en integrerad process och beslutsrollsteori har lett fram till ett antal slutsatser om design management. Några av slutsatserna är att design management, enligt teorierna, som arbetssätt inte är så vanligt och att det finns en viss samarbetsbrist enligt de intervjuade designkonsulterna, som i viss mån underlättas om design managern har kunskap om vad design innebär..

Aquatic organisms are usually not exposed to single substances but rather to mixtures of toxicants in streams located in agricultural areas. The transport of pesticides used in the agricultural area in Sweden is monitored with continuous environmental supervision every year. During 2002-2008 an average of 10 pesticides were found in each sample and 40% of the samples contained substances with concentrations higher than the Water Quality Standards. Chemical risk management is normally based on single-test evaluations. A problem when assessing mixture toxicities is that the constituents and concentrations of pollutants in the environment vary greatly.

This thesis was carried out at Atlas Copco Tools and Assembly Systems. The purpose hasbeen to develop a design tool to be used for development of new electric motors for AtlasCopcos electric nutrunners. The focus of the thesis has been to increase productivity bydecreasing the power losses in an electric tool. The productivity is defined as themaximum number of tightenings a nutrunner can perform without becoming too hot.Before starting the development of this design tool an existing Matlab script, whichcalculates the losses in a slotless electric motor, has been studied and modified torepresent the real losses in a better way. The modification has been made by performingpractical studies of different losses and then adjusting existing parameters in the Matlabscript.Because design changes in one part of a mechatronic system can lead to a decrease inperformance of another part the choice of parameters that can be changed has been madeso that other parts of the system is affected as little as possible.A study of the existing tools efficiency during an entire tightening has been made toincrease the understanding of when and where the different losses appear and to comparethe modified Matlab script with the measured values.The design tool was formed so that it executes the Matlab script, that calculates thelosses, for a number of different design options and stores the alternative which producesthe least losses.

Examensarbetet syftar till att jämföra nya alternativ till olika system för användning i laborationer i reglerteknikkurser för olika studentkategorier. Det skall utredas vilket av ett antal alternativ till mjukvaruplattformar som är bäst lämpat att användas vid reglerteknikundervisningen i ITN:s reglerlaboratorium vid Linköpings universitet. Tidigare laborationer i berörda kurser skall även modifieras så att dessa kan genomföras i de nya systemen.Examensarbetet resulterade i en rad modifierade laborationer och system att tillämpa i dessa. De nya systemen medför att all reglering sköts direkt från en dator istället för tidigare variant med externa apparater som programmeras. På så sätt kan större fokus läggas på regleringen i sig och inte de system som tillämpas för att utföra den..

Rapporten är skriven på svenska. För att utveckla användarvänliga system finns ett flertal riktlinjer angående hur man ska designa systemet. Rapporten tar huvudsakligen upp de designprinciper som Professor Donald Norman utvecklade, och som behandlar varje område i ett informationssystem. Det finns även andra riktlinjer som beskriver användarprinciper och universal design, och som med fördel kan följas vid design av ett informationssystem. En grupp på North Carolina State University i USA är en av många som har utvecklat sju principer för att behandla användarvänlighet[1].

The overall goal of this diploma work is to produce a design of a 5 GHz radio frontend using Agilent Advanced Design System (ADS) and then build a working prototype. Using this prototype to determine if RF circuits at 5 GHz can be successfully produced using distributed components on a laminate substrate. The design process for the radio front-end consists of two stages. In the first stage the distributed components are designed and simulated, and in the second stage all components are merged into a PCB. This PCB is then manufactured and assembled.

In this report a study has been done regarding different heating systems on which are the mostcomprehensive with solar heating systems. The report has also been focusing if solar power can beused as a primary heating source for supplying more than 50 % of the buildings total heatingproduction. The University of Dalarna constructed a demo-house for this purpose and according tocalculations the total solar usage is more than 50 %. This house has been made for referenceregarding the design of the heating system of property 5:37.Further studies have been made to compare different heating systems that are compatible with asolar system, where the compared systems purpose is to be independent of direct using electricity. Asystem of this design is regarded as sustainable according to environmental as economic issues.