DV01 is a bicycle concept aimed towards a contemporary target group, that considers the bicycle to be both a convenient means of transportation and a product with a high aesthetical value. A bicycle is for many people something that you attach to your own personal style, were not only the bicycles function but also its appearance plays a crucial role. It is also a product that consists of many different components and parts, which all affect the overall impression. The focus of the project has therefore been about finding a balance in the design. When form and function interact in a successful symbiosis, the result is often that the product may last longer and are more loved by its users..

This thesis work contains a litterature study about electrical motors in general and how PWM-patterns for brushless DC-motors can be made. A suitable method has been implemented as a simulation model in VHDL. A simulation model of a brushless DC-motor which describes the phasecurrents, torque and angular velocity has also been made. The motor model made simulations easier for the complete PWM-system. The design was synthesised and tested with a prototypeboard including a SPARTAN II FPGA.

This report describes the results of the project "Concept development of jet engine inspection plugs" carried out in the spring of 2008. The work was done at the department of product definition at the company Volvo Aero in Trollhättan. The objective of the work was to develop concepts for a "Volvo-unique" inspection plug. The work is part of Volvo Aero's focus on proprietary (self-developed) technologies. Inspection plugs can be found on virtually all aircraft engines and gas turbines.

The aim of this report is to give the reader insight into the development of theweb-based accounting application SuperBooky. Accounting is a complex task thatmany beginner entrepreneurs struggle with. The development of this application wastherefore focused on making accounting as convenient and as easy as possible. Theend product targets small enterprises and its functionality was designed with this inmind.To make sure that the application was designed in a user-friendly way, polls werecarried out among individuals with basic accounting knowledge. These polls werethen used as a basis when the application was under development, to ensure that itwas well-suited to the target audience.This project was carried out as a bachelor?s thesis for Chalmers University of Technologyand University of Gothenburg during Spring 2015.

This thesis has been done at the Unversity of Örebro for Örebro University Hospital (USÖ). In our work we have developed a product for hearing tests to determine hearing thresholds of small children. Our product contains software and a control surface for controlling two separate screens. One of the demands was that our software could handle big file libraries. Reliability and simplicity were essential for the user.In our work we have utilized programming of both microcontrollers and Windows software.

In many products a compromise between ground clearance and the required space to store the product has to be made. This problem attracted the attention of the authors of this thesis.The objective of this project is to develop a functioning solution to a foldable wheel. The solution should be applicable to several types of product groups. A limitation for this work has been made so that the work only covers solutions for lighter vehicles.The purpose is to drive this project forward, so that a solution can be found. Furthermore the purpose of the report is to clarify how the authors proceeded to design and construct the wheel according to a fixed specification.

Syfte: Syfte med uppsatsen är att öka vår kunskap om product displacement samt att utreda den påverkan product displacement har på mottagaren sett ur ett marknadsföringsperspektiv. Pararellt undersöks om fenomenet kan vara en fördel eller nackdel i marknadskommunikationen. Utgångspunkten i utredningen är att varumärkesinnehavare själva använder sig av product displacement.Metod: Denna studie har genomförts med en kvalitativ metod och induktiv ansats. Metodvalet har sin utgångspunkt i den bristande teorin då fenomenet product displacement är ett nytt begrepp sett ur ett marknadsföringsperspektiv. Undersökningen bygger på tjugo kvalitativa intervjuer med mottagare av product displacement samt två respondenter med yrkesanknytning inom marknadsföring.Avgränsningar: Denna uppsats behandlar endast product displacements effekter på mottagaren som i vårt fall är begränsat till studenter i ålder 20-25 år.

In this project an iPhone application for storing food and drink experiences was developed with focus on an easy interaction design. The already existing market of similar applications were studied and evaluated to extract their positive and negative features. Interviews with experts within the food and drink business where made in the pre study to get a good perception of how to divide and categorize the sections in the application. To optimize the usability, workshops with potential users with different technical experiences where continuously held during the development of the design.During the development two variants of development environments where evaluated. The final result of the application was developed in the environment that made the best impression and seemed to be the best alternative.The resulting product has a thought out design meant to be easy to understand, even for the first time users.

In this project a washing station has been constructed for Albany International AB. At present, there is no existing system to clean the dirty pipes that are coming back to the company.The work followed the product development process, and it started with the requirements list. This was followed by brainstorming, evaluation and completion.The result was a concept for de present time and one concept for the future.The present concept is intended to be built immediately. This is an adjustable bench with sliding bearings to facilitate the work. The actual cleaning is done with a high pressure washer that uses hot water.

Fluids are important to the Visual Effects Industry but extremely hard to control and simulate because of the complexity of the governing equations. Fluid solvers can be divided into two categories, those of the Eulerian point of reference and those of the Lagrangian. Both categories have different advantages and weaknesses and hybrid methods are popular. This thesis examines Smoothed Particle Hydrodynamics, a Lagrangian method for physically based uid simulations. To allow the artist the exibility given by shorter simulation times and increased number of iterations, the performance of the solver is key.

This report deals with an exam report written by Olle Hjalmarsson and Thomas Likar, students at Högskolan i Halmstad. The project was carried out for Haldex Traction AB in Landskrona whose business consist of manufacturing automatic all wheel drive systems (AWD-system). These systems consist of a plate clutch which activates all four wheels of a 4-wheel driven vehicle. An important component in these clutches is the accumulator which basically consists of a piston under the load of a spring which creates an oil pressure with the help of an electric motor used for actuating the clutch.At Haldex difficulties has been experienced regarding the assembly of the accumulator parts due to the small tolerances between the piston and the hole of the accumulator in the cast aluminium housing. Attempts have been made to assemble the parts in existing robot cells.

This report is a bachelor thesis work within the field of Product Development and is also an assignment for Thule Sweden. The work has been performed by Niclas Tjäderborn and Christian Holm, students at the Mechanical Engineering Program with major in Product Development and Industrial Design at Jönköping School of Engineering during spring the semester of 2009.The thesis work concerned the development of a new wheel holder for bike carrier for Thule Sweden. The background to the project was that the initiator wanted a more user friendly wheel holder with better design than those available on the market. The wheel holder is able to be implemented on one or several of Thule?s current wheel holders.

Foods that stimulate health and satisfy consumer expectations are needed. In a consumer´s perspective, products that provide several kinds of health benefits, without any call for major changes in their behaviour are needed on the market. With this increasing interest in health promoting food product, one of the biggest challenges for the food industry is to find the conditions and right position on the market and find the opportunities to enter the market successfully. New products with added health values can be developed to cure and counter welfare diseases as in this case for diabetics type 2. Swedish food companies have a desire to respond to welfare diseases and one welfare disease is diabetes type 2. Many of them have an ambition to develop new products to respond to the growing population and find a supply that could suit their customers.

To give a realistic impression in a driving simulator for nighttime driving, there are many challenging aspects to consider. One of the most important aspects is the illumination caused by the headlights of the own vehicle. To give a realistic impression there is the need to consider the characteristics of the headlight in use to be able to represent main and dipped beam, but also to represent different models and types of headlights. Another important aspect is the dazzling effects caused by the light cast by other vehicles upon the driver. These effects are not only important to give a realistic and visually appealing simulation, but also to simulate blinding effects which may affect the drivers ability to perceive the traffic environment to a large degree.

Due to the globalization and constant changes in society, competition has become a big factor in profit-driven companies and organizations. Innovation has become an effective way for the companies to increase their competitiveness. By adapting to the constant changes in society e.g. the technological advances, companies can retain their competitiveness on the market.The purposeof this study is to exemplify and describe how a profit-driven company managesinnovationbyinterviewing four office managers in different work units in the same company.The resultsshows, among other things,that interactive learning can bean initiation to innovation processes and that the participating company in this study workshard to promote innovation in work units..