Return handling is often regarded as a slow and complex process. Studies have shown that it is not unusual for a return to cost up to nine times as much as a standard outbound delivery. An efficient return handling process is therefore essential to all competitive companies dealing with logistics. This report investigates, analyzes and gives suggestions on development with the purpose to improve the return handling process at LensLogistics AB in Kista, north of Stockholm, Sweden. The study has been conducted from a deliberately practical point of view in order to suggest improvement suggestions possible to implement and thereby change the entire return handling process.

Laser for material processing possesses a number of advantages which mean that it has been and will be an important component for a wide range of industries' future development. Cutting materials processing is the dominant use of laser technology and has revolutionized the manufacturing industry. The aim of this thesis is to describe the principles of metal cutting by laser, how laser cutting is applied in practice and to identify how Swedish companies are using laser cutting. For the theoretical and technical description of laser cutting literature studies are the primary source of information. The empirical basis for the mapping of the Swedish industry for laser cutting is grounded on a survey; this includes Swedish companies that use laser cutting in their production.

Several technical solutions are ready to step forward as the new generation of propellant, and this report aims to explore the possibility of commercializing fuel cell cars. The report is based on current research and data from today's technology and engineering solutions that are estimated to be commercially realized before 2020.A mapping of today?s different fuel cell options has shown that the most suitable fuel cell option is the Proton Exchange Membrane Fuel Cell, which uses hydrogen as fuel. The report is focusing on a techno-economic well-to-wheel analysis of hydrogen and the energy balance and costs in a system perspective. The basis for this analysis consists of two centralized methods of production, steam methane reforming (SMR), and alkaline water electrolysis.

The ISO 9000-series is a set of quality standards created by the International Organization for Standardization. The series is intended to provide guidance to companies in the process of deploying an effective quality management system. The series includes the requirements standard ISO 9001. This standard contains requirements on how a quality management system should be designed and how companies generally must work with quality issues. When a quality management system is introduced, if wanted, a quality certification can be implemented.

AimThe aim with this essay has been to investigate how preschools profiling in motor activity training, work to stimulate motor development of children. In order to study this, the main focus for the research has been on the following queries:What characterize motor activity training at the preschools studied?What is the purpose with the motor activity training of preschools which were studied?How do the preschools describe the affect that motor activity training has on children?How do the preschools look at the need for motor activity training?MethodFour in-depth interviews were conducted with representatives of the chosen preschools profiling in motor activity. My selection was based on a strategic sample and this was made by an internet mapping of preschool activities in the districts of Stockholm, and information from the service guide of the town of Stockholm. Then e-mail was sent to ten contact persons at preschool units, and ten preschools were contacted directly by phone.

With new energy directives in place, the Swedish Social Service (SSS) stands beforethe challenge how to reduce the energy demand in its locales. It is a complex matter,as the locales are rented from various property owners and it becomes a question ofhow to reduce the operational electricity and influence the property owners to workmore with energy efficiency. This thesis takes a balanced research approach in threeparts. Firstly a qualitative part in form of interviews with personnel at the SSS and itsproperty owners, secondly a quantitative part of descriptive nature in form of energystatistics and thirdly a literature review of Energy Management (EM) Supply ChainManagement(SCM), Green Supply Chain Management(GSCM) and EnviromentalPerformance Indicators (EPI). This in order to be able to give normativerecommendations of how the SSS should act to reduce its energy consumption in itslocales and provide new insights on how EM, SCM, GSCM and EPI can be applied ineffect.

This study has been done in order to map the supply of vegetarian and vegan food products in Sweden for business clients and consumers. A total of 665 food stuffs were found and classified into six categories. The biggest category was meat substitutes with 302 products and the second largest category was sandwich spreads with 150 different products. Within the remaining categories a varied number of products were found; 86 beverages, 64 cooking accessories, 34 milk free ice creams and 29 plant based yogurts. Of the meat substitutes were 28 only available for business clients.

The trend towards increasingly large farming units raises questions regarding how to better monitor production. Larger units make the impact from possible errors more severe, which increases the pressure on management supervision. To cope with management issues, prevent errors and handle increased demands on traceability and documentation, the Real Time Location Systems (RTLS) concept is making its way into various parts of agriculture. In sectors outside agriculture, RTLS are already being used successfully to track and locate items through nodes at different levels of accuracy, such as room level or the relative or absolute position. Empirical data can be received in real time from the nodes.

Different techniques for precision agriculture have been available during the last decade. Some of them are more widely used than others. The main purpose of this thesis was to investigate the different attitudes to precision agriculture that exists among farmers and advisors in Sweden. Eight advisors and sixteen farmers were asked for their opinion of a number of specific techniques for precision agriculture, such as yield-mapping, precision liming, the Yara Nitrogen Sensor and site-specific fertilization with phosphorous and potassium. They were also asked to describe the way in which the counselling in Swedish agriculture is used and also about it's importance for the adaptation of new techniques. The high costs are mentioned to be one of the most important reasons why precision agriculture hasn't been more widely spread. Several farmers refer to their farms as too small to bear the costs that come with the techniques. The individual interest for technique among the potential users plays an important role.

Common species of freshwater mussels may, like the freshwater pearl mussel (Margaritifera margaritifera) have a drastic decline in number and there is several reasons, like sedimentation, a decline of host fishes, introduction of alien species, nutrition leakages from agriculture and pollutants of medic drugs and poison. Ann Gustavsson made in the year of 2007 a study over rejuventation of freshwater great mussels in nine watersystems and considered that the rejuventation within the populations were all along the line poor. This study orients from her work and points to determine if there is a connection between the poor juventation and pollution of nitrogen and phosphorous from industries and private sanitations. The study was performed with the software program ArcGIS9.2 to take out drainage areas for the concerned habitats and contact was made with the concerned authoritys. When it comes to supervision of private sanitations is it the countys and for industries is it the county administrative board.

Södra Skog chose in 2011 to convert the saw mill in Traryd to a gradually refined sawmill of hardwood. In 2009, they had also acquired the hardwood sawmill in Djursdala. This was strategically important for Södra's business since the demand for hardwood products has increased. The standing volume of deciduous trees in Sweden is today approximately 524 million m3sk and it has increased rapidly in recent years. However, the deciduous forests are to a large extent located in areas that are set aside for nature conservation and is thus not available to the industry.The goal of this work is to create a simple and reliable method for mapping of deciduous wood volumes in areas where Södra Skog is operating (Götaland excluding Gotland).The material that is used is raster databases with estimated forest attributes (kNN-Sweden), data from National Forest Inventory (NFI) and forest management plans.

Background - Swedish trade and industry primarily involves small corporations, including small manufacturing corporations. Currently, most costing models that are used are based on studies accomplished at large corporations. This conveys to the fact that product costing that occurs at small manufacturing corporations is based on all complexities that large corporations bring, which rarely match with small corporations. It occurs that small manufacturing corporations unconsciously rely on incorrect information that has been calculated based on great corporations? product costing.

Bees are of importance for the global food security. In Europe 84% and in the World 35% of all the agricultural crops are dependent of animal pollination (Winfree et al., 2011:1). In agricultural production there is a huge lack of pollinators (Azien & Harden, 2009). A problem that is widely spread. In Sweden the problem becomes clear when looking at the statistics of the number of bee colonies during the last 20 years, where it has been a decline with 63 % (Statistiska Centralbyrån & Jordbruksverket, 2011).

Songs from the Crypt: Mapping the Forces that Hinder the Digital Revolution of Music Distribution This paper seeks an explanation to the low market share growth of the commercial digital music distribution in Sweden. The analysis identifies a spectrum of obstacles that hinder the digital distribution technology from becoming the main form of music distribution in Sweden. These obstacles make the digital music distribution less favourable in comparison with physical distribution from the consumer?s point of view. The authors suggest that in order for the digital distribution of music to become competitive the digital product would either have to be developed further to offer more customer value or the so called a là carte retail model would have to be replaced by a subscription-based distribution model.

This bachelor thesis is written as a part of the geography program at Stockholm University, Sweden, and the study was conducted from April to June 2012.Tuberculosis (TB) is an airborne disease and one of the most widespread infectious diseases in the world with more than nine million new cases each year (SMI 2012, digital source). The disease is a major source of death and suffering in many places and the number of deaths remains high despite the availability of highly efficacious treatment. To control and prevent further spread of TB, the mapping of the disease spatial distribution is of essential importance.In this study, maps were produced that shows the spatial distribution of TB between the years 2002 to 2011 in the municipality of Stockholm. These maps allow an analysis of the spatial distribution at a local scale over time.The aim of this paper is to study how the spatial distribution of TB has looked like in the municipality of Stockholm the last 10 years and to analyze why the spatial distribution of the disease looked like it did. This study is based on the hypothesis ?drift?.